Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 67643-2910 USB connector features 4 contacts, with insulation resistance of 1Gohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a solderable board mounting option and operates b/w -40 to 85°C.
Median Price
$1.430
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Verical
1+ parts
$1.100
100+ parts
-
1k+ parts
$1.060
10k+ parts
$1.020
Chip1Stop
Mouser Electronics
$1.820
$1.280
$1.070
$1.040
Arrow
$1.895
$1.038
DigiKey
$1.910
$1.063
Newark
$2.040
$1.400
$1.260
TTI Europe
$1.203
$1.160
$1.052
Master Electronics
$1.720
$1.220
$1.110
TTI
$0.990
$0.970
Powell Electronics
$1.000
$0.960
Avnet
$1.015
$0.833
Digiode
Nova Conductors
VNN
IBS Electronics
$1.079
Vyrian
Semicontronic
$0.237
$0.231
$0.230
Corphita
$0.909
Argo Parts USA
$1.035
Aranea Global
$1.042
Continental Prestige Electronics
$1.710
$0.877
Andel Nordic
$2.942
$2.824
Aztec Data Supply Inc.
$6.786
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Resion (Excess)
The compact body length ensures that this connector can fit in tight spaces, making it versatile and suitable for various applications.
High insulation resistance ensures reliable signal transmission and reduces the risk of electrical shorts or interference, making it a dependable choice for telecom and datacom applications.
The high dielectric voltage withstand capability ensures safety and reliability in high voltage applications, making this connector suitable for demanding telecom and datacom environments.
The use of glass-filled polyamide as insulator material provides excellent mechanical strength and thermal stability, ensuring durability and long-lasting performance of the connector.
The USB connector type ensures compatibility with a wide range of devices, making it a convenient choice for connecting various equipment in telecom and datacom systems.
The UL 94V-0 flammability rating indicates that the connector meets stringent safety standards for fire resistance, making it a reliable choice for applications where fire safety is a concern.
The presence of 4 contacts allows for multiple signal connections, making the connector versatile and suitable for complex data transmission requirements in telecom and datacom applications.
Telecom & Datacom Connectors 67643-2910 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
67643-2910 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 67643 Series Shell Plating 30/May/2014 Mult Devs Plating Change 30/Aug/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
Synsemi
74990101241
Wuerth Elektronik & Kg
74990101241 by Wurth Elektronik is a Telecom & Datacom Connector with 0.661" body length, 0.689" width, and 0.689" depth. Featuring POLYETHYLENE insulator material, it has 8 contacts for board mounting at 2.54mm pitch. Ideal for telecom and datacom applications with UL94V-0 flammability rating and operating temperature range of -40 to 85°C.
KUSBX-SL2-CS1N24-B-TR
Kycon
KUSBX-SL2-CS1N24-B-TR by Kycon is a USB connector with a body length of 0.177 inch, body width of 0.387 inch, and body depth of 0.563 inch. It is commonly used in telecom and datacom applications for its durability, rated current of 5A, and surface mount termination type.
215877-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Contact Style: TELCOM, MODULAR; IEC Conformity: NO;
3230
Hirose Electric
3230 connector by Hirose Electric is a Telecom & Datacom Connector with TIN finish. It features IDC termination and copper alloy shell material, suitable for cable mounting applications. With UL 94V-0 flammability rating, this male plug connector is ideal for telecom and datacom systems.
J0011D21BNL
Pulse Electronics
J0011D21BNL by Pulse Electronics is a Telecom & Datacom Connector with dimensions of 0.64" x 0.545" x 0.85". Featuring Matte Tin finish, it has 8 contacts and is used in board and panel mounting applications for telecom and datacom systems.
USB4080-03-A
Global Connector Technology
USB4080-03-A by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a right-angle mounting style and liquid crystal polymer insulator material.
ARJM11C7-502-AB-ER2-T
Abracon's ARJM11C7-502-AB-ER2-T is a Telecom & Datacom Connector with gold finish, 8 contacts, and 0.626" body length. Ideal for board mounting applications in telecom and datacom systems due to its polarized housing and staggered PCB contact pattern. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
09454521925
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
MP1010RX-1000S
The Kycon MP1010RX-1000S is a telecom & datacom connector with 1010 contacts, gold flash finish, and copper alloy material. It has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C. Ideal for commercial applications requiring reliable wire termination in round cable setups.
LPJG0926HENL
Link-pp Int'l Technology
LPJG0926HENL by Link-pp Int'l Technology is a Telecom & Datacom Connector with dimensions of 0.626" x 0.528" x 0.839". It features 8 gold contacts, phosphor bronze material, and a polarized housing for secure board mounting. Ideal for telecom and datacom applications requiring right angle mounting with solder termination.
449150011
Molex
Molex 449150011 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYCARBONATE insulator material, UL94V-0 flammability rating, and supports 8 contacts with wire sizes ranging from 22 to 28 AWG.
HDR-E14MSG1+
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mating Contact Finish: GOLD (30) OVER NICKEL; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e4;
MTCC2R-020-020-01
TE Connectivity
TE Connectivity's MTCC2R-020-020-01 is a 3" telecom connector with 5000000000 ohm insulation resistance and 2121VAC dielectric voltage. It operates b/w -65 to 125 °C, UL-rated for 5A current, crimp termination, and nickel finish. Ideal for telecom & datacom applications requiring reliable signal connections.
HFJ11-1G01E-L12RL
Halo Electronics
HFJ11-1G01E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a 0.625" body length, 0.537" width, and 0.85" depth. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and solder termination type.
10033526-N3212LF
Amphenol Communications Solutions
10033526-N3212LF by Amphenol is a USB connector with 5 contacts, rated at 1A signal current. It features matte tin termination finish, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for telecom & datacom applications requiring a durable, right-angle board mounting option with a surface mount termination type.
6-555174-2
Commscope
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
MP1010RX-5000
Kycon's MP1010RX-5000 is a male plug telecom connector with 1010 contacts. It features gold flash termination, copper alloy contact material, and 1400VAC dielectric voltage. Ideal for telecom and datacom applications, this connector has a temperature range of -55 to 85°C and UL flammability rating of 94V-2.
ZX62-AB-5PA(31)
ZX62-AB-5PA(31) by Hirose Electric is a USB connector with gold termination, liquid crystal polymer insulator, and stainless steel shell. It has 5 contacts, rated for 1.8A signal current, suitable for telecom/datacom applications. With a right-angle mounting style and locking option, it is ideal for board and panel installations in various electronic devices.
5-2301996-2
TE Connectivity 5-2301996-2 is a EMI shielded connector with 0.531" body depth, made of liquid crystal polymer. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for telecom & datacom applications due to its right angle mounting style and solder termination option.
175472-4
175472-4 by Tyco Electronics Amp is a Telecom & Datacom Connector with 36 contacts. It features TIN LEAD/TIN OVER NICKEL termination, POLYAMIDE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting applications requiring a male plug connector with RIGHT ANGLE mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
67643-0910
Molex 67643-0910 is a USB connector with gold finish, suitable for telecom/datacom applications. Features include 1.5A signal current, 750VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for board mounting with solder termination and UL94V-0 flammability rating.
67643-2911
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
67643-3911
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
67643-3910
67643-1991
67643-1981
67643-0911
67643-0930
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Style: USB 2.0 A; No. of Ports: 1;
67643-0931
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Resistance: 30 mohm; Total No. of Contacts: 4;
67643-1930
67643-2990
67643-2991
67643-0080
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of PCB Rows: 1; Body Width: .478 inch;
67643-1091
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Insulator Color: WHITE; Mounting Option-2: MOUNTING FLANGE;
67643-2090
67643-2091
67643-3090
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Style: USB 2.0 A; Insulation Resistance: 1000000000 ohm;
67643-1031
67643-2010
67643-2011
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved