Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 67643-3910 USB connector features 4 contacts, with 0.567" body length and 0.274" width. Insulation resistance of 1e9 ohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, UL-rated with solderable retention clips for board mounting at -40 to 85°C.
Median Price
$1.090
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Arrow
1+ parts
$0.929
100+ parts
-
1k+ parts
$0.681
10k+ parts
Interstate Connecting
$1.046
Heilind Electronics
$1.051
RS Americas
$1.400
$0.970
Master Electronics
$1.518
$1.380
$1.190
$1.060
Newark
$1.860
$1.630
$1.430
Mouser Electronics
$1.890
$1.450
$1.230
$1.150
Element14
$1.920
DigiKey
$2.030
$1.125
PEI Genesis
Chip1Stop
$0.993
$0.937
TTI Europe
$0.917
$0.863
$0.841
Verical
$1.637
$1.490
TTI
$0.900
$0.840
$0.820
Farnell
$0.877
$0.814
Powell Electronics
$1.050
$1.030
Digiode
$0.883
DF Sales Co.
$1.079
Nova Conductors
$1.179
TME
$1.990
$1.530
$1.460
VNN
Vyrian
ACDS - Activité Composants Distribution Service
Rutronik
$0.855
$0.839
IBS Electronics
$1.325
Bristol Electronics
Flex Direct, LLC
Semi Source
Semicontronic
$0.770
$0.751
$0.747
Corphita
$0.836
Argo Parts USA
Continental Prestige Electronics
$1.156
Netroflash
Andel Nordic
$1.730
$1.661
Aztec Data Supply Inc.
$1.833
CoreStaff
$2.268
$1.280
$1.191
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Glotronic Ltd.
GreenTree Electronics
Abacus Technologies
The compact body length of this connector allows for space-saving installation in tight spaces.
High insulation resistance ensures reliable and safe operation of the connector.
The high dielectric voltage rating ensures the connector can withstand voltage spikes or surges.
Being a USB connector, it ensures compatibility with a wide range of devices, making it a versatile choice for connectivity.
With 4 contacts, this connector allows for multiple signal or power connections, increasing its utility.
The right angle mounting style allows for easy and convenient installation in confined spaces or on circuit boards.
The USB 2.0 A contact style ensures compatibility with various USB devices, making it a reliable choice for connectivity.
Telecom & Datacom Connectors 67643-3910 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
67643-3910 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 67643 Series Shell Plating 30/May/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Silicon Standard
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDLL4148
Fairchild Semiconductor
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
SS-74301-002
Bel Fuse SS-74301-002 is a Telecom & Datacom Connector with 0.68"x.65"x.68" dimensions, matte tin over nickel finish, and polyethylene insulator. It features 2 PCB rows with 8 contacts, staggered pattern on 2.54mm pitch for board mounting applications in commercial settings.
2337993-2
TE Connectivity
TE Connectivity 2337993-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
48391-0003
Molex
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
6-569530-2
Commscope
6-569530-2 by Commscope is a Telecom & Datacom Connector with Glass Filled Polycarbonate insulator, Nickel shell finish, and Copper Alloy shell material. It has 8 contacts and is a male plug type connector suitable for cable mounting applications.
3000
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
GSB4211311WEU
AMPHENOL ICC
GSB4211311WEU by Amphenol Icc is a USB connector with a nickel shell finish and a total of 4 contacts. It is made of polybutylene terephthalate/polyethylene insulator material and has a copper alloy shell. This connector is commonly used in telecom and datacom applications for board mounting in a right angle configuration.
47346-0001
The Molex 47346-0001 is a USB connector with a body length of 0.307", body width of 0.116", and termination contact finish of GOLD. It is commonly used in telecom and datacom applications, offering a durable design with 10,000 cycles and a right-angle mounting style.
74990101210
Wuerth Elektronik & Kg
74990101210 by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel shell finish, Copper Alloy shell material, and is UL 94V-0 rated. Ideal for board mounting in telecom and datacom applications.
2007394-8
TE Connectivity 2007394-8 is a Telecom & Datacom Connector with 160 contacts, operating from -55 to 105°C. It features an empty shell, press-fit termination, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
5569381-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Shell Material: COPPER ALLOY; IEC Conformity: NO;
1054440001
USB CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
USB4120-03-C
Global Connector Technology
USB4120-03-C by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable design with liquid crystal polymer insulator material.
5557969-1
TE Connectivity 5557969-1 is a Telecom & Datacom Connector with EMI shielding. It features 0.715" body length, 0.66" width, and 0.658" depth. Ideal for telecom applications due to its UL-rated durability and polarization key for polarized housing.
RJHSE-5381-02
Amphenol
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
RJHSE-5381-06
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
292304-2
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
74441-0007
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
1-5406299-1
TE Connectivity 1-5406299-1 is a Telecom & Datacom Connector with EMI Shielding. It features Insulation Resistance of 500MΩ, UL Flammability Code 94V-0, and rated for 750 Cycles durability. Ideal for board and panel mounting applications requiring reliable signal connections in telecom and datacom systems.
5406721-2
TE Connectivity's 5406721-2 is a telecom and datacom connector with a body length of 0.669 inch, insulation resistance of 500000000 ohm, and a body width of 0.488 inch. It is used for board and panel mounting in applications requiring a durable, right angle jack connector.
TDS8PC5
L-com
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Mixed Contacts: NO; Mounting Style: STRAIGHT; Contact Style: TELCOM, MODULAR; Shell Finish: NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
67643-0910
Molex 67643-0910 is a USB connector with gold finish, suitable for telecom/datacom applications. Features include 1.5A signal current, 750VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for board mounting with solder termination and UL94V-0 flammability rating.
67643-2911
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
67643-3911
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
67643-2910
67643-3990
67643-3991
67643-0911
67643-0931
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Resistance: 30 mohm; Total No. of Contacts: 4;
67643-1910
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; PCB Contact Pattern: RECTANGULAR; Additional Features: SHEILDED;
67643-1931
67643-2991
67643-0081
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of PCB Rows: 1; Body Length: .567 inch;
67643-0090
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Terminal Length: .102 inch; No. of Rows Loaded: 1;
67643-2090
67643-3090
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Style: USB 2.0 A; Insulation Resistance: 1000000000 ohm;
67643-3091
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Mounting Type: BOARD AND PANEL; Empty Shell: NO;
67643-1010
67643-3010
67643-3011
67643-0990
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved