Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
95622-4883
Molex
The Molex 95622-4883 is a telecom & datacom connector with body dimensions of 0.712" x 0.512" x 0.823". It has an insulation resistance of 500M ohm, dielectric voltage rating of 1000VAC, and contact material made of copper alloy. This male connector is designed for board mounting in commercial applications requiring durability up to 500 cycles at temperatures ranging from -40°C to 80°C.
.512 inch
.823 inch
.712 inch
RECEPTACLE
TELECOM AND DATACOM CONNECTOR
MALE
COPPER ALLOY
20 mohm
TELCOM, MODULAR
1000VAC
500 Cycles
500000000 ohm
BLACK
GLASS FILLED LIQUID CRYSTAL POLYMER
95622
LOCKING
RIGHT ANGLE
BOARD
1
80
-40 Cel
RECTANGULAR
1.5 A
UL
COMMERCIAL
TIN
Telecom and Datacom Connectors
1.27
SURFACE MOUNT
8
472720023
The Molex 472720023 USB connector features gold termination, glass-filled polyethylene insulator, and copper alloy contacts. With a dielectric voltage of 300VAC, it is ideal for telecom & datacom applications. This right-angle receptacle has a durability of 10k cycles and operates b/w -20 to 85°C.
SOLDER HOLDING POSTS
.243 inch
.567 inch
.666 inch
USB CONNECTOR
AU ON NI
GOLD
30 mohm
300VAC
10000 Cycles
10000000 ohm
GLASS FILLED POLYETHYLENE
DETENT
MOUNTING FLANGE
ONE
85
-20 Cel
30u
POLARIZED HOUSING
.5 A
NICKEL
PHOSPHOR BRONZE
.508
20
84729-0002
The Molex 84729-0002 is a telecom & datacom connector with a body length of 1.5in and depth of 0.73in. It has an insulation resistance of 100MΩ and can operate in temperatures ranging from -40°C to 80°C. This USB connector has a rated current of 1A and is commonly used in commercial applications for its reliability and locking mounting option.
.73 inch
1.5 inch
NI
USB, SER A FLAT
100000000 ohm
84729
1 A
4
20 AWG
47151-8021
The Molex 47151-8021 USB connector features nickel/gold termination, polyethylene insulator, and copper alloy contacts. With 19 contacts, it is ideal for telecom/datacom applications. Operating from -20 to 85°C, this surface mount connector offers reliable signal current of 0.5A in a right-angle receptacle design with locking mounting option.
AU
Nickel/Gold (Ni/Au)
POLYETHYLENE
e4
47151
.4826
19
75586-0106
Molex 75586-0106 is a telecom/datacom connector with 0.031" mating contact pitch, suitable for board mounting with TIN over nickel termination finish. Featuring 68 contacts in a polarized housing, it offers durability of 250 cycles and operates b/w -40°C to 80°C.
PEG
.211 inch
.453 inch
1.189 inch
NOT SPECIFIED
TIN OVER NICKEL
FEMALE
BELLOWED TYPE
NO
250 Cycles
e3
0.031
2
GENERAL PURPOSE
STAGGERED
2.4892
Headers and Edge Type Connectors
.7874
68
94V-0
87824-0015
Molex 87824-0015 is a Telecom & Datacom Connector with 29 contacts, TIN finish, and glass-filled LCP insulator. It's a female receptacle connector for surface mount applications on boards.
MULTIPLE MATING PARTS AVAILABLE
YES
STRAIGHT
29
84729-0001
Molex 84729-0001 USB connector has 4 contacts, rated for 1A signal current. With insulation resistance of 100M ohm, it operates b/w -40 to 80°C. Ideal for telecom/datacom applications due to its receptacle body style and male contact gender.
CABLE
WIRE
28 AWG
84729-0009
Molex 84729-0009 USB connector has insulation resistance of 1G ohm, dielectric voltage of 750VAC, and operates b/w -40 to 60 °C. Ideal for telecom/datacom applications with UL standard compliance, it features a male gender, solder termination, and straight mounting style.
ROHS COMPLIANT
.74 inch
750VAC
200 Cycles
1000000000 ohm
60
POLAR PIN POSITION
.114 inch
2.0066
SOLDER
85727-1001
The Molex 85727-1001 is a telecom and datacom connector with a body size of 2.33" x 1.002" x 1.107". It has 8 ports, rated current of 1.5A, and a shell made of brass. This right-angle jack connector is suitable for board mounting and has a durability of 750 cycles.
1.002 inch
1.107 inch
2.33 inch
JACK
750 Cycles
85727
70
0 Cel
BRASS
.14 inch
32+32
85727-1004
Molex 85727-1004 is a telecom & datacom connector with dimensions 2.33" x 1.002" x 1.107". Featuring 32+32 contacts, it has a plating thickness of 30u and operates b/w 0-70°C. Ideal for board mounting with durability of 750 cycles, this male connector is designed for right-angle mounting in commercial applications.
75783-0334
Molex 75783-0334 is a telecom & datacom connector with 68 contacts, 2 rows, and insulation resistance of 1G ohm. It has a body length of 1.205", operates b/w -40°C to 105°C, and features a right angle mounting style. Ideal for commercial applications requiring high durability and reliable signal current up to 0.5A.
ROHS,ELV COMPLIANT, TAPE PKG
.333 inch
.889 inch
1.205 inch
COMPRESSION
25 Cycles
1.251
105
RIGHT
.2502
46765-1302
The Molex 46765-1302 connector is a Telecom & Datacom Connector with 0.256" body length, 10000000 ohm insulation resistance, and 200VAC dielectric voltage. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator material, it offers durability of 5000 cycles in commercial applications.
POLARIZED, SHIELDED
LOCATING POSTS
.295 inch
.256 inch
10 mohm
200VAC
5000 Cycles
-30 Cel
15u
.8 A
CSA, UL
.4064
84700-0002
Molex 84700-0002 is a TELECOM AND DATACOM CONNECTOR with POLYESTER insulator, 8 contacts, and rated current of 1.5A. It operates b/w -40 to 60°C, has durability of 500 cycles, and is suitable for commercial telecom/datacom applications.
SHIELDED
PLUG
ROUND
POLYESTER
CRIMP
95551-7667
Molex 95551-7667 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator. It has 6 contacts, rated at 1.5A signal current, and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecom applications due to its durability of 2500 cycles.
STANDARD: RJ11, TOP ENTRY
SPLIT BOARD LOCK
.655 inch
.639 inch
.586 inch
2500 Cycles
95551
BOARD AND PANEL
50u
.126 inch
2.54
6
95522-2647
Molex 95522-2647 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator. It has 4 contacts, rated at 1.5A signal current, and operates b/w -40 to 80°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
.64 inch
.629 inch
NOT APPLICABLE
43223-8176
Molex 43223-8176 is a telecom & datacom connector with 64 contacts, 8 ports, and insulation resistance of 500MOhm. It has a body length of 4.5", dielectric voltage of 1000VAC, and operates b/w -40 to 80°C. Ideal for board mounting applications in telecommunications and data communication systems due to its durability, right-angle mounting style, and solder termination type.
8 PORT, 8-POSITION EACH
.505 inch
.828 inch
4.5 inch
GLASS FILLED POLYAMIDE
MULTIPLE MATING PARTS AVAIABLE
.11 inch
64
71626-1001
The Molex 71626-1001 is a Telecom & Datacom Connector with 160 contacts, 4 loaded rows, and insulation resistance of 100M ohm. It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and is suitable for board mounting applications in telecom and datacom systems. With a dielectric voltage of 700VAC, it ensures reliable signal transmission in commercial environments.
LFH
BOARD LOCK
.372 inch
.19 inch
2.75 inch
700VAC
.5004
N-111; N-112; N-113
M3
BOARDLOCK
CARBON STEEL
D Type Connectors
.092 inch
160
95043-2891
Molex 95043-2891 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom/datacom applications, it has POLYCARBONATE insulator material, TIN shell finish, and UL94V-0 flammability rating.
.892 inch
.46 inch
NATURAL
POLYCARBONATE
22 AWG
71661-2068
The Molex 71661-2068 is a Telecom & Datacom Connector with 68 contacts, 0.05" mating pitch, and 2.092" body length. It has a dielectric voltage of 500VAC and operates b/w -40°C to 105°C. Ideal for board mounting in telecom and datacom applications due to its solder termination and staggered PCB contact pattern.
SURFACE MOUNT COMPATIBLE
2.092 inch
LEAF
500VAC
.8896
0.05
1.905
.139
71661-2100
The Molex 71661-2100 is a Telecom & Datacom Connector with 100 contacts, 2 rows, and a mating contact pitch of 0.05". It has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and solder termination type.
2.892 inch
Tin (Sn) - with Nickel (Ni) barrier
100
43223-8146
Molex 43223-8146 is a Telecom & Datacom Connector with dimensions of 2.324" x 0.524" x 0.828". It has an Insulation Resistance of 500MOhm, Dielectric Withstanding Voltage of 1000VAC, and operates b/w -40°C to 80°C. Ideal for board mounting applications in telecom and datacom systems due to its durability, UL certification, and female contact gender.
4 PORT, 8-POSITION, SHIELDED
.524 inch
2.324 inch
32
43223-8164
Molex 43223-8164 is a Telecom & Datacom Connector with 48 contacts, TIN finish, and 500 cycles durability. It has a dielectric voltage of 1000VAC and operates b/w -40 to 80°C. Ideal for board mounting in telecom and datacom applications.
6 PORT, 8-POSITION, SHIELDED
3.424 inch
48
43860-0012
Molex 43860-0012 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. Insulation resistance of 500M ohm, operating temp range -40 to 85°C. Ideal for board mounting in commercial applications requiring a female contact style with right-angle mounting option.
STACKED, SHIELDED
HOLE .125-.137
.533 inch
.62 inch
.645 inch
2.032
43860-0017
Molex 43860-0017 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It has an insulation resistance of 500M ohm, operates b/w -40°C to 85°C, and features a nickel shell finish. Ideal for board mounting with UL certification, this female connector has 6 contacts and solder termination for commercial applications.
43860
54280-0809
The Molex 54280-0809 is a Telecom & Datacom Connector with GLASS FILLED POLYETHYLENE insulator, TIN shell finish, and 8 FEMALE contacts. It is UL 94V-0 rated and designed for CABLE mounting applications.
SOCKET
54280
54306-2019
Molex 54306-2019 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 20 contacts, and STEEL shell. It is a male plug connector for board mounting with solder termination. Ideal for applications requiring high UL flammability rating (94V-0) in telecommunications and data communication systems.
STEEL
54331-0201
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; DIN Conformance: NO; IEC Conformity: NO;
84702-0005
Molex 84702-0005 is a Telecom & Datacom Connector with Polyester insulator. It has 8 female contacts, straight mounting style, and board mount. Ideal for telecom and datacom applications due to its receptacle body style.
745480211
Molex 745480211 is a Telecom & Datacom Connector with 26 contacts, surface mount termination, and female contact gender. Ideal for board mounting in telecom and datacom applications requiring right angle mounting style.
26
95622-4882
The Molex 95622-4882 is a telecom and datacom connector with a body length of 0.783", width of 0.512", and depth of 0.823". It has an insulation resistance of 500MΩ, termination contact finish of matte tin over nickel, and is commonly used in board mounting applications.
.783 inch
MATTE TIN OVER NICKEL
47151-1002
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
PANEL MOUNTABLE
.478 inch
.591 inch
Tin/Bismuth (Sn/Bi)
e6
74337-0052
Molex 74337-0052 is a telecom/datacom connector with 136 contacts, 0.031" pitch, and 1.681" body length. It features matte tin finish, polyethylene insulator, and withstands up to 250VAC. Ideal for commercial applications requiring durable connectors with high insulation resistance and reliable performance at temperatures ranging from -55°C to 85°C.
ULTRA+, EMI/RFI SHIELDED, POLARIZED
.503 inch
1.681 inch
PREASSEM CONN
Matte Tin (Sn) - with Nickel (Ni) barrier
50 mohm
250VAC
M2X0.4
INSERT
PANEL
2+2
-55 Cel
FLASH
Other Rectangular Connectors
PRESS FIT
136
74337-0065
Molex 74337-0065 is a telecom & datacom connector with 136 contacts, 0.031" pitch, and 500000000 ohm insulation resistance. It has a steel shell, polyethylene insulator, and TIN over nickel termination finish. Ideal for applications requiring durability, reliability, and signal current rating of 0.5A in commercial environments.
44520-0004
Molex 44520-0004 is a Telecom & Datacom Connector with 64 contacts, 1.5A signal current rating, and 500 cycles durability. It features glass-filled polyester insulator material, nickel shell finish, and solder termination type. Ideal for telecom and datacom applications requiring high insulation resistance (500M ohm) and dielectric voltage (1000VAC).
1 inch
1.09 inch
35.584
GLASS FILLED POLYESTER/POLYBUTYLENE TEREPHTHALATE
44520
.158 inch
75134-1001
Molex 75134-1001 is a telecom & datacom connector with 59 contacts, 4 rows, and mating contact pitch of 0.05". It features insulation resistance of 500M ohm, operating temperatures from -20°C to 85°C, and UL94V-0 flammability rating. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission up to 3A.
.514 inch
.44 inch
1.541 inch
SQ PIN-SKT
SCREWLOCKS
3 A
59
74441-0007
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
HIGH SPEED
.212 inch
.324 inch
.973
8.2042
.8
30
760445001
The Molex 760445001 is a telecom and datacom connector with glass-filled plastic insulator material. It has a max operating temperature of 100°C and a min operating temperature of -40°C. With 2 ports and a total of 40 contacts, it is suitable for board mounting in commercial applications.
2 PORTS, 20-POSITION EACH
100 Cycles
GLASS FILLED PLASTIC
0759510999
.081 inch
40
75451-0001
Molex 75451-0001 is a Telecom & Datacom Connector with 240 contacts, made of glass-filled plastic. It features press-fit termination and right-angle mounting style for board and panel applications.
12 PORTS 20 POSITIONS EACH
75451
240
445600014
Molex 445600014 is a Telecom & Datacom Connector with dimensions of 2.291" x 0.494" x 0.818". It has an Insulation Resistance of 500M ohm, Matte Tin over Nickel Termination Contact Finish, and Glass Filled Polyamide Insulator Material. Ideal for board and panel mounting in telecom and datacom applications with UL Flammability Code 94V-0 compliance.
.494 inch
.818 inch
2.291 inch
25 mohm
22.24
.13 inch
455600160
The Molex 455600160 is a Telecom & Datacom Connector with a mating contact pitch of 0.031", insulation resistance of 1Gohm, and dielectric voltage rating of 300VAC. It is used in applications requiring a male connector with surface mount termination for board mounting, featuring a polarized key and UL flammability rating of 94V-0.
HANDYLINK
.355 inch
.227 inch
.826 inch
POLARIZED KEY
16
446200002
Molex 446200002 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting with split board lock option, it features black insulator color and brass shell material. Suitable for commercial applications requiring reliable signal transmission at -40 to 70°C.
POLARIZED
.53 inch
48037-2000
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
SOLDERABLE RETENTION CLIPS
.177 inch
.472 inch
Tin (Sn)
500254-1927
Molex 500254-1927 is a Telecom & Datacom Connector with 0.591" body length, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for board mounting with solderable retention clips, this male connector has a rated current of 0.5A and operates b/w -20 to 85°C.
ROHS COMPLIANT & 500 PCS/REEL
2.3352
500254
500254-1931
The Molex 500254-1931 is a telecom/datacom connector with 0.591" body length, 0.632" width, and 0.478" depth. It offers 100000000 ohm insulation resistance and 500VAC dielectric voltage withstand. Ideal for board mounting with solderable retention clips, it has a rated current of 0.5A and operates b/w -20 to 85°C.
.632 inch
M3X0.5
TIN-COPPER
440500001
Molex 440500001 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features GLASS FILLED NYLON insulator material, 8 contacts, and operates b/w -40 to 80°C.
1 PORT, 8-POSITION EACH
.81 inch
.6 inch
GLASS FILLED NYLON
.12 inch
441500006
The Molex 441500006 is a Telecom & Datacom Connector with dimensions of 2.325" x 0.524" x 0.828". It offers Insulation Resistance of 500M ohm, Dielectric Withstanding Voltage of 1000VAC, and Contact Finish in Matte Tin over Nickel. Ideal for telecom and datacom applications requiring a durable connector with UL Flammability Code of 94V-0.
4 PORT, 8-POSITION EACH
2.325 inch
.142 inch
34691-6161
Telecom and Datacom Connectors; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
34691-6162
Telecom and Datacom Connectors; Contact Material: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
© 2023 All rights reserved
