Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 472720023 USB connector features gold termination, glass-filled polyethylene insulator, and copper alloy contacts. With a dielectric voltage of 300VAC, it is ideal for telecom & datacom applications. This right-angle receptacle has a durability of 10k cycles and operates b/w -20 to 85°C.
Median Price
$5.315
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Verical
1+ parts
$5.190
100+ parts
$5.100
1k+ parts
$4.810
10k+ parts
-
Master Electronics
$4.040
$3.880
PEI Genesis
DigiKey
$5.440
$5.130
Chip1Stop
$5.830
$5.180
Farnell
Nova Conductors
$4.780
Digiode
$4.930
Vyrian
VNN
IBS Electronics
$5.408
TME
$5.788
$4.917
Semicontronic
$3.430
$3.344
$3.327
Corphita
$4.671
Continental Prestige Electronics
$4.684
Andel Nordic
$4.978
$4.779
AZTECH Wire
$6.480
$6.220
$6.100
$5.980
Kepictronics
Argo Parts USA
Assy Fe
The compact size of the connector allows for efficient use of space in electronic devices.
High insulation resistance ensures reliable signal flow and reduces the risk of interference or short circuits.
The high dielectric voltage tolerance makes this connector suitable for applications where high voltage levels are present.
Gold contact finish provides excellent conductivity and corrosion resistance for a durable connection.
Having multiple contacts allows for a variety of signal connections, making the connector versatile.
Board mounting option simplifies installation and ensures secure attachment to the circuit board.
Low contact resistance facilitates efficient signal transmission and reduces loss in conductivity.
Telecom & Datacom Connectors 472720023 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
472720023 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - Multiple Series 05/Apr/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
89485-8000
The Molex 89485-8000 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications, it offers a dielectric voltage of 750VAC and operates at temperatures up to 125°C. With a durability of 1500 cycles, this right-angle receptacle is suitable for board and panel mounting.
RJHSE-5M80
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
MUSB-E151-34
Amphenol
MUSB-E151-34 by Amphenol is a USB connector with gold-plated contacts, suitable for telecom/datacom applications. It features a dielectric voltage of 100VAC, insulation resistance of 100M ohm, and operates b/w -40 to 105°C. With a compact design and high reliability, it offers a total of 5 contacts in a right-angle receptacle style for board or panel mounting.
TDS8PC5
Infinite Electronics International
TDS8PC5 by Infinite Electronics International is a Telecom & Datacom Connector with dimensions of 0.46" x 0.26" x 0.66". It features Phosphor Bronze contacts, Polycarbonate insulator, and Brass shell material suitable for IDC termination in telecom applications. Rated for 1.5A signal current, UL certified, and supports wire sizes from 24-26 AWG.
L-com
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Mixed Contacts: NO; Mounting Style: STRAIGHT; Contact Style: TELCOM, MODULAR; Shell Finish: NICKEL;
1543
Delphi Connection Systems
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Mixed Contacts: NO;
SS-6466-NF-A431
Bel Fuse
Bel Fuse's SS-6466-NF-A431 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY contacts, and 30u plating thickness. It has 6 contacts, rated at 1.5A for signal current, UL94V-0 flammability code. Ideal for board mounting in telecom and datacom applications due to its right-angle mounting style and staggered PCB contact pattern.
MP1010RX-1000S
Kycon
The Kycon MP1010RX-1000S is a telecom & datacom connector with 1010 contacts, gold flash finish, and copper alloy material. It has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C. Ideal for commercial applications requiring reliable wire termination in round cable setups.
48037-1000
The Molex 48037-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this connector has a durable steel shell, surface mount termination, and is rated for 1500 cycles.
RJHSE-5380-04
Amphenol RJHSE-5380-04 is a 4-port telecom & datacom connector with 32 contacts. Features include matte tin termination, phosphor bronze contact material, and polyethylene insulator. Ideal for board mounting with right-angle style, suitable for commercial applications requiring UL standard compliance.
5-2301996-1
TE Connectivity
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
10029449-001RLF
The Amphenol Communications Solutions 10029449-001RLF is a Telecom & Datacom Connector with 0.59" body length, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for board mounting in telecom applications due to its right-angle receptacle design and surface mount termination.
09455511100
Harting Electronics & Kg
09455511100 by Harting Electronics & Kg is a Telecom & Datacom Connector with body width of 0.463", termination contact finish of TIN OVER NICKEL, and insulator material NYLON46. It is used in applications requiring a right angle mounting style, surface mount termination type, and rated current signal of 1.5A.
2086588121
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
632712000011
Wuerth Elektronik & Kg
632712000011 by Wurth Elektronik is a USB connector with 22 contacts, gold termination finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications, it features a nickel shell finish and copper alloy contact material. Designed for surface mount board mounting, this male plug connector has a UL flammability code of 94V-0.
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Termination Type: SOLDER; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
2301996-2
TE Connectivity's 2301996-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel finish. It has 8 contacts for board mounting at temperatures from -40 to 85°C. Ideal for telecom and datacom applications requiring right-angle mounting with solder termination.
SI-46001-F
Bel Fuse SI-46001-F is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel/Tin shell finish, UL 94V-0 flammability code, and copper alloy shell material. Ideal for board mounting in telecom and datacom applications.
UX60-MB-5S8(70)
Hirose Electric
The Hirose Electric UX60-MB-5S8(70) is a USB connector with 5 contacts, rated for 1A signal current. Featuring liquid crystal polymer insulation and a copper alloy shell, it has a durability of 5000 cycles. With a compact body size of 0.303" x 0.156" x 0.354", it is ideal for telecom and datacom applications requiring reliable connectivity in temperatures ranging from -30°C to 75°C.
1888653-3
TE Connectivity 1888653-3 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and tin termination. It has 8 contacts, rated at 1.5A signal current, suitable for board and panel mounting in commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
472720001
The Molex 472720001 is a telecom & datacom connector with 0.7" body length, 100000000 ohm insulation resistance, and 707VAC dielectric voltage. It features a glass-filled liquid crystal polymer insulator and gold termination finish. Ideal for board mounting in applications requiring high durability and reliability such as telecommunications and data communications.
472720024
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
47271-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Tin (Sn);
472720026
Telecom and Datacom Connectors; Termination Contact Finish: GOLD;
472720029
Molex 472720029 is a 0.7"x.243"x.567" telecom connector with matte tin finish, glass-filled polyethylene insulator, and brass contacts. It has 20 male contacts, UL standard, and mounts on PCBs in right angle style for datacom applications.
472721004
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Mounting Type: BOARD;
472720025
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Body Length: .666 inch;
472720003
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Body Width: .255 inch;
47272-1002
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved