Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Body Length: .666 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$9.475
$9.096
Corphita
Cyclops Electronics Ltd (Excess)
Telecom & Datacom Connectors 472720025 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
472720025 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Meritek Electronics
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Micro Commercial Components
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Shenzhen Yixinsemi Electronics
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Hi-tron Semiconductor
48258-0002
Molex
Molex 48258-0002 is a USB connector with gold termination, suitable for telecom/datacom applications. It features a body size of 0.571" x 0.272" x 0.551", glass-filled polyamide insulator, and phosphor bronze contacts. With UL 94V-0 flammability rating, it operates b/w -25°C to 85°C and supports up to 1.5A signal current.
UJ2-MIBH-4-MSMT-TR
Cui Devices
UJ2-MIBH-4-MSMT-TR by CUI Devices is a USB connector with 5 contacts, rated at 1.8A signal current. It features liquid crystal polymer insulation, 10000 cycle durability, and operates b/w -25 to 85°C. Ideal for telecom & datacom applications requiring a right-angle board mount option.
48258-0001
The Molex 48258-0001 USB connector features a body length of 0.571", insulation resistance of 1000000000 ohm, and dielectric voltage of 500VAC. Ideal for telecom/datacom applications, it offers a solder holding flange for board mounting, with durability up to 1500 cycles.
HDRA-E68LFDT-SLA
Honda Tsushin Kogyo
HDRA-E68LFDT-SLA by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with a mating contact pitch of 0.031". Featuring an insulation resistance of 1Gohm, it has a dielectric voltage rating of 250VAC. This female plug connector, designed for right-angle mounting on boards and panels, uses solder termination and is suitable for commercial applications.
5-2301996-1
TE Connectivity
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
5569284-1
TE Connectivity 5569284-1 is a Telecom & Datacom Connector with 0.615" body length, 0.65" width, and POLYAMIDE insulator. It has 500M ohm insulation resistance, Tin (Sn) termination finish, and operates b/w -40 to 85°C. Ideal for telecom applications due to its UL-rated design, polarized housing, and FEMALE contact gender.
406732-2
TE Connectivity 406732-2 is a telecom & datacom connector with EMI shielding, polyamide insulator, and tin shell finish. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting in applications requiring right angle mounting and solder termination.
48037-2000
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
2027180100
The Molex 2027180100 is a Telecom & Datacom Connector with 76 contacts, GLASS FILLED POLYETHYLENE insulator, and UL 94V-0 flammability rating. It is used for board and panel mounting in applications requiring surface mount termination, featuring female contact gender and right angle mounting style.
1719821142
Molex 1719821142 is a Telecom & Datacom Connector with 42 contacts, featuring Tin (Sn) finish with Nickel (Ni) barrier. It uses POLYETHYLENE insulator material and offers RIGHT ANGLE mounting style for BOARD installation. Ideal for applications requiring FEMALE contact gender in TELECOM AND DATACOM environments.
SS-6488S-A-NF-01-M07
Bel Fuse
Bel Fuse SS-6488S-A-NF-01-M07 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 2.54mm PCB contact row spacing, and NICKEL/TIN shell finish. It has 8 contacts for right angle mounting on boards or panels, suitable for commercial applications requiring UL 94V-0 flammability code compliance.
47659-1100
The Molex 47659-1100 is a Telecom & Datacom Connector with 19 contacts. It features GOLD FLASH over NICKEL termination, LIQUID CRYSTAL POLYMER insulator, and NICKEL shell finish. Ideal for board mounting in applications requiring FEMALE contact gender and STRAIGHT mounting style.
2564450000
Weidmueller & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
RJHSE-5381-06
Amphenol
43860-0019
Molex 43860-0019 Telecom & Datacom Connector features Insulation Resistance of 500MΩ, Rated Current - Signal of 1.5A, and Contact Resistance of 20mΩ. Ideal for board mounting in telecom and datacom applications with UL Flammability Code 94V-0.
7499011212A
Wuerth Elektronik & Kg
7499011212A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy shell material, and Solder termination type. Ideal for board mounting in applications requiring right angle mounting style.
632712000011
632712000011 by Wurth Elektronik is a USB connector with 22 contacts, gold termination finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications, it features a nickel shell finish and copper alloy contact material. Designed for surface mount board mounting, this male plug connector has a UL flammability code of 94V-0.
2007394-5
TE Connectivity's 2007394-5 is a Telecom & Datacom Connector with dimensions of 2.26" x 1.007" x 2.504". It features LIQUID CRYSTAL POLYMER insulator, UL94V-0 flammability rating, and operates b/w -55°C to 105°C. Ideal for telecom and datacom applications requiring a right-angle mounting style with press-fit termination.
2000890000
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1734753-1
TE Connectivity USB Connector 1734753-1 with POLYBUTYLENE TEREPHTHALATE insulator, rated for 1A signal current, and 5000 cycle durability. Ideal for telecom/datacom applications requiring a straight receptacle with SOLDER termination and POLARIZED HOUSING. Operating temperature range from -20 to 60 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved