Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJHSE-5380-04 is a 4-port telecom & datacom connector with 32 contacts. Features include matte tin termination, phosphor bronze contact material, and polyethylene insulator. Ideal for board mounting with right-angle style, suitable for commercial applications requiring UL standard compliance.
Median Price
$4.285
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$2.675
100+ parts
$2.297
1k+ parts
$2.216
10k+ parts
-
Farnell
$4.010
$3.010
$2.770
Heilind Electronics
$4.761
$3.968
$3.720
Interstate Connecting
$4.861
$4.038
$3.804
Verical
$4.880
$4.290
$4.190
Mouser Electronics
$5.250
$3.980
$3.750
Newark
$5.900
$4.980
$4.410
Element14
$8.160
$5.890
$5.030
DigiKey
$1.600
TTI Europe
$3.023
$2.655
$2.600
TTI
$3.530
$3.330
Chip1Stop
$3.660
$3.190
Powell Electronics
$4.560
$3.920
Master Electronics
$3.560
$3.150
Nova Conductors
$3.325
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
ComSIT USA
TME
$5.180
$3.240
Vyrian
Electro Sonic
$3.030
Rapid Electronics
$4.473
IBS Electronics
$5.016
$4.729
$4.657
NAC Semi
$5.870
$5.420
Bristol Electronics
Sensible Micro Corp
Continental Prestige Electronics
$3.120
$3.058
Argo Parts USA
Gateway Technologies
$3.122
$2.778
Bastille Electronics
$3.159
$3.001
$2.959
Singapore Electronics
$3.433
$3.192
$3.055
$2.918
Advanced Electronics
$3.803
$3.613
Semicontronic
$4.230
$4.124
$4.103
Ampacity Inc.
Corohmni
$6.505
Aztec Data Supply Inc.
$8.229
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
Assy Fe
Eastek
The long body length provides secure and stable connection between components.
The slim body width allows for space-saving installation in crowded areas.
The termination contact finish ensures durability and corrosion resistance for long-term use.
The ample body depth accommodates various cable sizes for versatile connectivity options.
The insulator material provides excellent electrical insulation and protection.
The thick plating thickness enhances conductivity and signal transmission efficiency.
The multiple ports allow for simultaneous connections, increasing networking capabilities.
The connector type is specifically designed for telecom and datacom applications, ensuring compatibility and reliability.
The contact material offers excellent conductivity and resistance to wear and tear.
The mating contact finish provides a secure and stable connection for optimal signal transfer.
The compliance with UL standards ensures safety and quality in the product design and manufacturing process.
The high number of contacts allows for a wide range of connectivity options for various devices and systems.
The board mounting option offers easy installation and secure attachment to circuit boards.
The durable stainless steel shell provides excellent strength and protection for the internal components.
The precise terminal pitch ensures accurate alignment and connection with other components.
The staggered PCB contact pattern facilitates efficient signal transmission and minimizes interference.
The solder termination type offers a reliable and permanent connection for long-lasting performance.
The male contact gender is compatible with standard female connectors for seamless integration.
The jack body style is common in telecom and datacom applications, ensuring compatibility with existing equipment.
The right angle mounting style allows for easy access and connection in tight spaces or angled setups.
The telecom and modular contact style is versatile and widely used in telecommunications and networking applications.
The short terminal length provides secure connection without adding unnecessary bulk to the connector.
The locking mounting option ensures that the connector stays securely in place, preventing accidental disconnection.
The commercial-grade reliability ensures consistent performance in various industrial and commercial settings.
Telecom & Datacom Connectors RJHSE-5380-04 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJHSE-5380-04 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SMBJ18CA
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BAV99
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
1705549-1
TE Connectivity
TE Connectivity's 1705549-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 flammability rating, and brass shell material. It has 8 contacts, operates b/w -40 to 70°C, and supports a rated current of 1.5A. Ideal for surface mount applications in telecom and datacom equipment.
555153-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: TELCOM, MODULAR; Board Mounting Option: SPLIT BOARD LOCK; Empty Shell: NO;
RJHSE-5380-A8
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
FCN-361J008-AU
Fujitsu
FCN-361J008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features gold-silver contact finish, copper alloy material, and polyester insulation for high reliability in commercial applications. With a mating contact pitch of 0.1 inch, this connector is suitable for telecom and datacom systems operating b/w -55°C to 85°C.
43860-0025
Molex
Molex 43860-0025 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 0.533" body width. Ideal for board mounting with staggered PCB contact pattern, it operates b/w -40°C to 85°C and has UL94V-0 flammability rating.
RJHSE-3381-A1
Amphenol
Amphenol RJHSE-3381-A1 is a Telecom & Datacom Connector with 8 contacts, featuring Matte Tin over Nickel termination finish and Polyethylene insulator. Ideal for board and panel mounting, it uses Phosphor Bronze contact material and Gold over Nickel mating finish. Suitable for telecom applications requiring reliable female connectors.
61400826021
Wuerth Elektronik & Kg
61400826021 by Wurth Elektronik is a USB connector with gold finish, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting with solderable retention clips and offers durability up to 1500 cycles.
AU-Y1007-R
Assmann Wsw Components
AU-Y1007-R by Assmann Wsw Components is a USB connector with 4 contacts, rated at 1.5A signal current. It features a nickel shell finish, solderable retention clips for board mounting, and a polarization key for easy assembly. Ideal for telecom & datacom applications due to its durability of 1500 cycles and commercial reliability.
RJHSE-5380
Amphenol's RJHSE-5380 is a telecom and datacom connector with a body length of 0.65", width of 0.53", and depth of 0.62". It has a matte tin termination contact finish, polyethylene insulator material, and can operate b/w -55°C to 85°C. This right angle jack connector is commonly used in board and panel mounting applications.
USB4055-30-A
Global Connector Technology
USB4055-30-A by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ, suitable for telecom/datacom applications. With a durable design lasting up to 10,000 cycles, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.
RJHSE-538008
Amphenol RJHSE-538008 is a Telecom & Datacom Connector with 8 ports and 64 contacts. It features Matte Tin (Sn) termination, POLYETHYLENE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting with a right angle jack body style, suitable for commercial applications requiring reliable connectivity.
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
SS-6488S-A-NF-50
Bel Fuse
Bel Fuse SS-6488S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and COPPER ALLOY shell. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring reliable right-angle board connections.
692112030100
692112030100 by Wurth Elektronik is a USB connector with a body length of 0.472", insulation resistance of 100M ohm, and dielectric voltage of 100VAC. It is ideal for telecom & datacom applications, featuring a surface mount termination type and durability of 5000 cycles.
935
Keystone Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
215877-1
TE Connectivity's 215877-1 is a telecom and datacom connector with a body length of 0.598", insulation resistance of 500MΩ, and a body width of 0.453". It is commonly used in board mounting applications, offering durability with 750 cycles.
10168-6000EC
3m Electronic Products Division
10168-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features GOLD OVER NICKEL Termination Contact Finish and GLASS FILLED POLYESTER Insulator Material.
67643-2910
Molex 67643-2910 USB connector features 4 contacts, with insulation resistance of 1Gohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a solderable board mounting option and operates b/w -40 to 85°C.
651005136421
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
5555153-1
TE Connectivity 5555153-1 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and 500M ohm insulation resistance. Ideal for board mounting with split board lock option, it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: MATTE TIN OVER NICKEL; DIN Conformance: NO;
RJHSE-5080-04
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
RJHSE-5080-08
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm; Rated Current - Signal: 1.5 A;
RJHSE-5080-A2
RJHSE-5381-02
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
RJHSE-5381-03
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; IEC Conformity: NO; Body or Shell Style: JACK;
Amphenol RJHSE-5381-03 is a telecom & datacom connector with 24 contacts, featuring matte tin finish with nickel barrier. It uses phosphor bronze contact material and gold over nickel mating finish. Ideal for board and panel mounting in telecom applications.
RJHSE-5080
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: PHOSPHOR BRONZE; Filter Feature: NO;
RJHSE-5080-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .52 inch; Plating Thickness (inch): 50u; Filter Feature: NO;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Termination Type: SOLDER; Total No. of Contacts: 16;
RJHSE-3381
RJHSE-3381 by Amphenol is a telecom & datacom connector with 8 contacts, made of copper alloy. It features matte tin termination finish, gold mating contact finish over nickel, and polarization key for polarized housing. Ideal for board and panel mounting in commercial applications with operating temperatures from -55°C to 85°C.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
RJHSE-5380-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Option-1: LOCKING; PCB Contact Row Spacing (mm): 1.78;
Amphenol RJHSE-5380-02 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features insulation resistance of 500MΩ, dielectric voltage withstand of 1000VAC, and durability for 750 cycles. Ideal for board mounting in applications requiring reliable male connectors with right-angle mounting style.
RJHSE-538108
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Mating Contact Finish: AU ON NI; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .65 inch; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved