Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJHSE-5381-03 is a telecom & datacom connector with 24 contacts, featuring matte tin finish with nickel barrier. It uses phosphor bronze contact material and gold over nickel mating finish. Ideal for board and panel mounting in telecom applications.
Median Price
$3.270
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$3.530
100+ parts
$2.580
1k+ parts
$2.530
10k+ parts
-
Heilind Electronics
$4.687
$3.906
Mouser Electronics
$5.530
$4.030
$3.740
$3.700
Future Electronics
$2.940
$2.850
Chip1Stop
$3.215
$3.200
Arrow
$3.038
$2.945
Verical
TTI Europe
$3.360
$3.000
$2.860
TTI
$3.140
Nova Conductors
$3.606
Rutronik
$4.140
$3.780
IBS Electronics
$3.876
$3.756
Vyrian
TME
$4.229
$4.005
Electro Sonic
$3.370
$3.150
$3.040
NAC Semi
$5.790
Bristol Electronics
ComSIT Distribution GmbH
Prism Electronics
Semicontronic
$2.430
$2.369
$2.357
Argo Parts USA
$3.135
Continental Prestige Electronics
$3.072
Aranea Global
$3.534
$3.393
Gateway Technologies
$3.209
Singapore Electronics
$3.967
$3.689
$3.371
Aztec Data Supply Inc.
$3.973
Corohmni
$5.207
Ampacity Inc.
$5.280
Authorized Procurement Solutions
Abacus Technologies
Perfect Parts
GreenTree Electronics
Robosynatics
$0.527
Eastek
The Matte Tin finish provides good conductivity and corrosion resistance, while the Nickel barrier enhances durability and ensures long-lasting performance.
The Nickel shell finish provides excellent protection against external elements and enhances the overall durability of the connector.
Phosphor Bronze is known for its excellent conductivity and durability, making it a reliable choice for the connector's contacts.
Having a UL Flammability Code of 94V-0 indicates that the connector meets strict safety standards and is suitable for use in various environments.
The Gold over Nickel finish on the mating contacts ensures low contact resistance and reliable electrical connections for improved performance.
With 24 contacts, this connector provides ample connectivity options for various telecom and datacom applications, making it versatile and adaptable.
The Board and Panel mounting type offers flexibility in installation and allows for easy integration into different systems and setups.
The Copper Alloy shell material provides good strength and conductivity, ensuring reliable performance and longevity of the connector.
Solder termination offers a secure and reliable connection, making installation and maintenance of the connector easier and more convenient.
The female contacts on the connector ensure compatibility with male connectors, allowing for easy and secure connections between devices.
The Jack style body or shell design is commonly used in telecom and datacom applications, providing a familiar and reliable form factor for users.
The Right Angle mounting style offers space-saving and efficient installation options, ideal for applications where space is limited or where a specific orientation is required.
The Telecom and Modular contact style ensures compatibility with a wide range of standard connectors, making this product versatile and suitable for various applications.
Telecom & Datacom Connectors RJHSE-5381-03 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
RJHSE-5381-03 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Taitron Components
Good-ark Electronics
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
LM358N
Kec
SS-39200-011
Bel Fuse
Bel Fuse SS-39200-011 is a Telecom & Datacom Connector with Gold finish, Polycarbonate insulator, and Copper Alloy contacts. It has 8 contacts, operates b/w -40 to 85°C, and offers durability of 750 cycles. Ideal for commercial applications requiring reliable crimp termination in telecom and datacom systems.
614105150721
Wuerth Elektronik & Kg
614105150721 by Wurth Elektronik is a USB connector with gold termination, liquid crystal polymer insulator, and staggered PCB contact pattern. It is used in telecom & datacom applications for board mounting with solder posts, offering durability of 10k cycles and operating temperature range from -40 to 85°C.
10117835-002LF
AMPHENOL ICC
Amphenol Icc's 10117835-002LF USB connector has a body length of 0.571", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it features a right-angle mounting style with solder termination and male contact gender.
1734372-1
TE Connectivity
TE Connectivity's 1734372-1 USB Connector features a 0.472"x.177" body with POLYETHYLENE insulator, NICKEL finish, and UL 94V-0 flammability rating. With 4 contacts, it supports 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications, this connector is polarized and has a locking mounting option for secure cable termination.
87583-2010BLF
Amphenol Communications Solutions
87583-2010BLF by Amphenol is a Telecom & Datacom Connector with 4 contacts, Tin finish with Nickel barrier, and Polyethylene insulator. It is a surface mount receptacle connector suitable for board mounting in telecom and datacom applications.
1734366-3
TE Connectivity USB Connector 1734366-3 with POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom/datacom applications, featuring SOLDERABLE RETENTION CLIPS for board mounting and rated at 1A signal current with FEMALE contact gender.
57-10500
Cinch Connectivity Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; Insulator Color: BLUE;
UX60SA-MB-5ST(80)
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UX60SA-MB-5ST(80);
TTL-232RG-VREG3V3-WE
FTDI
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5555167-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
85502-5007
Molex
Molex 85502-5007 is a Telecom & Datacom Connector with LCP insulator, matte tin finish, and brass contacts. It has 6 female contacts, operates b/w -40 to 85°C, and mounts on PCBs using solder posts. Ideal for commercial telecom applications requiring right-angle mounting and surface mount termination.
6-555174-2
Commscope
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
HDRA-E68W2LFDT1EC-SL+
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
10029449-111RLF
The Amphenol Communications Solutions 10029449-111RLF is a Telecom & Datacom Connector with 0.59" body length, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for telecom and datacom applications, this connector features POLYETHYLENE insulator material, FLASH plating, and a rated current of 0.5A.
1054500101
The Molex 1054500101 is a USB connector with a body length of 0.352", body width of 0.128", and termination contact finish of GOLD. It is commonly used in telecom and datacom applications for board mounting with solder holding posts.
2-1734035-1
TE Connectivity's 2-1734035-1 USB connector features GLASS FILLED POLYAMIDE9T insulator, NICKEL shell finish, and 29.92u plating thickness. With a rated current of 1A, it is ideal for telecom applications requiring board mounting with locating post option. Operating temperature ranges from -40 to 85 °C.
3012
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
HFJ11-2450E-L12RL
Halo Electronics
HFJ11-2450E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 0.625" body length, 0.537" width, and 0.85" depth. It features gold termination contact finish, 30u plating thickness, and polarized housing. Ideal for board mounting applications in telecom and datacom systems.
67643-0910
Molex 67643-0910 is a USB connector with gold finish, suitable for telecom/datacom applications. Features include 1.5A signal current, 750VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for board mounting with solder termination and UL94V-0 flammability rating.
5-2301996-2
TE Connectivity 5-2301996-2 is a EMI shielded connector with 0.531" body depth, made of liquid crystal polymer. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for telecom & datacom applications due to its right angle mounting style and solder termination option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJHSE-3381-A1
Amphenol
Amphenol RJHSE-3381-A1 is a Telecom & Datacom Connector with 8 contacts, featuring Matte Tin over Nickel termination finish and Polyethylene insulator. Ideal for board and panel mounting, it uses Phosphor Bronze contact material and Gold over Nickel mating finish. Suitable for telecom applications requiring reliable female connectors.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: MATTE TIN OVER NICKEL; DIN Conformance: NO;
RJHSE-5080-04
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
TELECOM AND DATACOM CONNECTOR;
RJHSE-5080-08
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm; Rated Current - Signal: 1.5 A;
RJHSE-5080-A2
RJHSE-5381-02
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
RJHSE-5381-03
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; IEC Conformity: NO; Body or Shell Style: JACK;
RJHSE-5080
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: PHOSPHOR BRONZE; Filter Feature: NO;
RJHSE-5080-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .52 inch; Plating Thickness (inch): 50u; Filter Feature: NO;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Termination Type: SOLDER; Total No. of Contacts: 16;
RJHSE-3381
RJHSE-3381 by Amphenol is a telecom & datacom connector with 8 contacts, made of copper alloy. It features matte tin termination finish, gold mating contact finish over nickel, and polarization key for polarized housing. Ideal for board and panel mounting in commercial applications with operating temperatures from -55°C to 85°C.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
RJHSE-5380-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Option-1: LOCKING; PCB Contact Row Spacing (mm): 1.78;
Amphenol RJHSE-5380-02 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features insulation resistance of 500MΩ, dielectric voltage withstand of 1000VAC, and durability for 750 cycles. Ideal for board mounting in applications requiring reliable male connectors with right-angle mounting style.
RJHSE-538108
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Mating Contact Finish: AU ON NI; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
RJHSE-5380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .65 inch; MIL Conformity: NO;
RJHSE-538M
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Body Width: .53 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved