Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
RJHSE-538008
Amphenol
Amphenol RJHSE-538008 is a Telecom & Datacom Connector with 8 ports and 64 contacts. It features Matte Tin (Sn) termination, POLYETHYLENE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting with a right angle jack body style, suitable for commercial applications requiring reliable connectivity.
PEG
.53 inch
.62 inch
4.99 inch
JACK
TELECOM AND DATACOM CONNECTOR
AU ON NI
Matte Tin (Sn) - with Nickel (Ni) barrier
MALE
PHOSPHOR BRONZE
TELCOM, MODULAR
POLYETHYLENE
e3
RJHSE
LOCKING
RIGHT ANGLE
BOARD
8
STAGGERED
50u
UL
COMMERCIAL
Telecom and Datacom Connectors
.1 inch
2.032
SOLDER
64
RJHSE-538108
RJHSE-538108 by Amphenol is a Telecom & Datacom Connector with 8 ports and 64 contacts. It features Matte Tin (Sn) termination, POLYETHYLENE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting with a right-angle style, this connector has a body length of 4.99", width of 0.53", and depth of 0.62".
RJHSE-538408
Amphenol RJHSE-538408 is a telecom & datacom connector with 8 ports, 64 contacts, and matte tin finish. It has a body size of 4.99" x 0.53" x 0.62" and uses polyethylene insulator material. Ideal for board mounting with staggered PCB contact pattern, suitable for commercial applications.
RJHSE-538A08
Amphenol RJHSE-538A08 is a Telecom & Datacom Connector with 8 ports and 64 contacts. Features include Matte Tin (Sn) finish, Polyethylene insulator, and Phosphor Bronze contact material. Ideal for board mounting with right-angle style, suitable for commercial applications in telecommunications and data communication systems.
FRJAE-416
FRJAE-416 by Amphenol is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1000VAC Dielectric Withstanding Voltage, and Gold Flash Termination Contact Finish. It is ideal for telecom and datacom applications requiring high durability, polarized housing, and gold mating contacts over nickel. The connector features a split board lock mounting option, staggered PCB contact pattern, and solder termination type for reliable performance in temperatures ranging from -55 to 85°C.
SHIELDED
SPLIT BOARD LOCK
GOLD (50) OVER NICKEL (50)
Gold Flash (Au)
FEMALE
RECTANGULAR
20 mohm
NO
1000VAC
750 Cycles
YES
500000000 ohm
BLACK
MOUNTING FLANGE
BOARD AND PANEL
2
1
85
-55 Cel
GENERAL PURPOSE
2.54
POLARIZED HOUSING
1.5 A
NICKEL TIN
COPPER ALLOY
6
94V-0
MRJ-5381-013
Amphenol MRJ-5381-013 is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination. Ideal for applications requiring POLYETHYLENE insulator material, PHOSPHOR BRONZE contact material, and 8 contacts in a RECEPTACLE shell style.
RECEPTACLE
GOLD OVER NICKEL
1500 VAC
e4
NICKEL
ZINC ALLOY
MRJ-5381-M1
Amphenol MRJ-5381-M1 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features gold over nickel mating contact finish, polyethylene insulator material, and staggered PCB contact pattern. Ideal for commercial applications requiring durable connectors with high insulation resistance and wide operating temperature range from -40 to 105°C.
.709 inch
1.061 inch
1.193 inch
TIN
30 mohm
2500 Cycles
M3X0.5
105
-40 Cel
MRJ-5384-M1
Amphenol MRJ-5384-M1 is a telecom & datacom connector with gold-plated contacts, 500M ohm insulation resistance, and 105°C max operating temp. Ideal for board mounting in commercial applications requiring durable female connectors with staggered PCB contact pattern.
Gold (Au) - with Nickel (Ni) barrier
MRJ-5480-01
Amphenol MRJ-5480-01 is a Telecom & Datacom Connector with gold-plated contacts, polyethylene insulator, and zinc alloy shell. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting with solder termination. Operating temperature range from -40 to 105°C makes it ideal for commercial applications requiring reliable connectivity.
.37 inch
1.142 inch
STRAIGHT
MRJ-5481-01
Amphenol's MRJ-5481-01 is a telecom and datacom connector with insulation resistance of 500MΩ, dielectric voltage of 1500VAC, and gold over nickel termination. It is used for board and panel mounting in applications requiring reliable signal transmission.
MRJ-5485-01
Amphenol's MRJ-5485-01 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Features include 1500VAC dielectric voltage, gold over nickel termination finish, and polyethylene insulator material. Ideal for board and panel mounting in telecommunications applications.
MRJ-5780-01
Amphenol MRJ-5780-01 is a Telecom & Datacom Connector with 8 contacts. It features Matte Tin finish, Polyethylene insulator, and Zinc Alloy shell. Ideal for board mounting applications in telecom and datacom systems due to its right angle receptacle design and gold over nickel mating contact finish.
MRJ-5780-M1
Amphenol MRJ-5780-M1 is a Telecom & Datacom Connector with 8 contacts, gold finish for superior conductivity, and polyethylene insulator. Ideal for board mounting applications in telecom and data communication systems due to its right angle mounting style and female contact gender.
UE76-A20-5000T
Amphenol UE76-A20-5000T is a Telecom & Datacom Connector with 20 contacts, GOLD FLASH finish, and LIQUID CRYSTAL POLYMER insulator. Ideal for surface mount applications in telecom and datacom systems due to its right angle mounting style and female contact gender.
GOLD (15)
GOLD FLASH OVER NICKEL
LIQUID CRYSTAL POLYMER
UE76-A20
SURFACE MOUNT
20
RJHSE-5381-02
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
SHIELDED, 2 PORT 8-POSITION EACH
1.27 inch
22.24
TWO
1.78
STAINLESS STEEL
.125 inch
2.03
16
RJSSE-5380-04
Amphenol RJSSE-5380-04 is a 4-port telecom & datacom connector with dimensions of 2.51" x 0.525" x 0.62". It features insulation resistance of 500M ohm, dielectric voltage withstand of 1500VAC, and operating temperature range from -20 to 85°C. Ideal for board mounting with surface mount termination, it offers reliable connectivity in commercial applications.
.525 inch
2.51 inch
GOLD (20) OVER NICKEL (50)
1500VAC
GUIDE SLOT
4
-20 Cel
20u
1.27
MUSB-A111-30
MUSB-A111-30 by Amphenol is a USB2.0 A female connector with a right angle mounting style. It has a body length of 1.181 inch, insulation resistance of 1000000000 ohm, and can withstand temperatures from -40 to 105 °C. This connector is commonly used in telecom and datacom applications for board and panel mounting.
.638 inch
1.181 inch
USB CONNECTOR
GOLD (30) OVER NICKEL (50)
Tin (Sn)
USB2.0 A
500VAC
1000000000 ohm
#4-40
SCREW
ONE
30u
.099 inch
MUSB-B151-34
MUSB-B151-34 by Amphenol is a USB connector with 5 contacts, rated for 1A signal current. It features a dielectric voltage of 100VAC and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, this connector has a right-angle mounting style and solder termination.
.394 inch
.405 inch
.787 inch
Tin (Sn) - with Nickel (Ni) barrier
50 mohm
MINI-USB2.0 B
100VAC
100000000 ohm
#2-56
1.2
1 A
.108 inch
1.6
5
MUSB-C511-00
Amphenol MUSB-C511-00 USB connector with 1.201" body length, 500VAC dielectric voltage, and 105°C max temp. Ideal for telecom/datacom applications, featuring solder termination, 30u plating thickness, and UL94V-0 flammability rating.
.827 inch
.724 inch
1.201 inch
GLASS FILLED POLYETHYLENE
HOLE .217
1+1
.084 inch
4+4
MUSB-D111-M0
Amphenol's MUSB-D111-M0 USB connector has 4 contacts, rated at 1.5A signal current with 30mohm contact resistance. It features a right-angle mounting style, zinc alloy shell material, and white insulator color. Ideal for telecom/datacom applications with UL reference standard compliance.
.866 inch
NOT SPECIFIED
NOT APPLICABLE
USB2.0 B
WHITE
M3
.072 inch
2.5
RJE58-188-5401
Amphenol's RJE58-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500MΩ, and operates b/w -40 to 85°C. Ideal for commercial applications requiring reliable right-angle board mounting with solder termination.
.547 inch
.846 inch
.631 inch
MATTE TIN OVER NICKEL
1400VAC
RJE58-188-5
1.25 A
RJE58-188-5441
Amphenol RJE58-188-5441 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500MΩ, and operates b/w -40 to 85°C. Ideal for commercial applications requiring reliable right-angle board mounting with solder termination.
RJSSE-5380-02T
Amphenol's RJSSE-5380-02T is a telecom & datacom connector with 16 contacts, nickel finish, and polyethylene insulator. It has a body size of 1.27" x 0.525" x 0.72", suitable for right-angle mounting on PCBs. This UL-certified connector is ideal for commercial applications requiring reliable telecommunications and data communication connections.
.72 inch
RJSSE-5381-01T
Amphenol's RJSSE-5381-01T is a Telecom & Datacom Connector with 8 contacts, featuring Matte Tin finish with Nickel barrier. Made of Copper Alloy, it has Polyethylene insulator and Gold mating contact finish. Ideal for board and panel mounting in telecom/datacom applications.
LATCHED
RJSSE-5381-02T
Amphenol's RJSSE-5381-02T is a telecom & datacom connector with 16 contacts, 2 ports, and POLYETHYLENE insulator. It features a 0.525"x.72" body, 20u plating thickness, and COPPER ALLOY shell material. Ideal for board mounting with PEG option, this male connector has a right angle mounting style and surface mount termination for commercial applications.
RJSSE-5381
Amphenol RJSSE-5381 is a Telecom & Datacom Connector with 8 contacts. It features a Dielectric Withstanding Voltage of 1400VAC, Matte Tin termination finish, and Gold mating contact finish. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and female contact gender.
.65 inch
MRJR-5384-B1
Amphenol MRJR-5384-B1 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. Featuring a zinc alloy shell, it has a body size of 1.193" x 0.709" x 1.115". Ideal for board mounting with solder termination, this UL-rated connector operates b/w -40°C to +105°C.
1.115 inch
.15 inch
MRJR-53A1-01
Amphenol's MRJR-53A1-01 is a telecom & datacom connector with 10 contacts, rated for 1.5A signal current. Featuring a zinc alloy shell and nickel finish, it operates b/w -40°C to 105°C. Ideal for board mounting with staggered PCB contact pattern, suitable for commercial applications requiring reliable connectivity.
10
MRJR-5780-01
Amphenol MRJR-5780-01 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features polyethylene insulator, zinc alloy shell, and nickel finish. Suitable for commercial applications with UL reference standard compliance, operating from -40 to 105°C in right-angle board mounting configuration.
80 mohm
THREADED
MUSB-AA11-35
USB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
RJHSE-5081-02
TELECOM AND DATACOM CONNECTOR; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3; Mating Contact Finish: GOLD (50) OVER NICKEL (50); Termination Contact Finish: MATTE TIN OVER NICKEL; Manufacturer Series: RJHSE;
MUSB-E151-04
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
USBFTV2PE1G
Amphenol's USBFTV2PE1G is a telecom & datacom connector with -55 to 85°C operating range. Featuring female contact gender, it has UL 94V-0 flammability rating and panel mounting. Ideal for applications requiring straight receptacle style connectors in telecommunications and data communication systems.
POLARIZED
MULTIPLE MATING PARTS AVAILABLE
PANEL
RJHSE-538A-02
Amphenol RJHSE-538A-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin termination, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for board and panel mounting applications in commercial environments with a temperature range of -55 to 85°C.
2 PORTS 8 POSITION EACH
57-20360-20
Amphenol 57-20360-20 is a Telecom & Datacom Connector with 36 contacts, rated at 5A signal current. It has a mating contact pitch of 0.085", dielectric voltage withstand of 700VDC, and operates b/w -55°C to +105°C. Ideal for commercial applications requiring reliable board-mounted female connectors with solder termination.
LATCH, SPRING
.61 inch
.395 inch
2.685 inch
BELLOWED TYPE
700VDC
DIALLYL PHTHALATE
0.085
0.169
4.2926
5 A
CSA, UL
ZINC
STEEL
D Type Connectors
.156 inch
2.159
36
57-20500-79
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VDC; Contact Pattern: RECTANGULAR; PCB Contact Row Spacing (mm): 4.2926;
3.28 inch
50
908-22109
Amphenol 908-22109 is a Telecom & Datacom Connector with Gold (Au) finish. It features Female contact gender, Surface Mount termination, and Right Angle mounting style. Ideal for telecom and datacom applications requiring board-mounted connectors.
Gold (Au)
MRJ-5385-01
Amphenol MRJ-5385-01 is a telecom & datacom connector with gold-plated contacts, 500M ohm insulation resistance, and 1.5A signal current rating. Ideal for board mounting in applications requiring high durability and reliability, with operating temperatures from -40 to 105°C.
RJF22G00
RJF22G00 by Amphenol is a Telecom & Datacom Connector with 8 contacts, CADMIUM shell finish, and -40 to 85°C operating temperature range. It features POLARIZED HOUSING for UL-rated durability in board mounting applications. Ideal for telecom and datacom systems requiring reliable female connectors with staggered PCB contact pattern.
500 Cycles
CADMIUM
METAL
MUSB-B151-04
USB CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: GOLD (30) OVER NICKEL (50); Contact Material: PHOSPHOR BRONZE;
TIN OVER NICKEL
RJHSE-7361-08
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
G091231304LF
Amphenol G091231304LF is a telecom and datacom connector with dimensions of 0.831" x 0.185" x 0.537". It has 7 contacts, a tin termination contact finish, and a black insulator color. This plug-style connector is suitable for surface mount applications.
.185 inch
.537 inch
.831 inch
PLUG
7
DID-29PFFS-SL8001
TELECOM AND DATACOM CONNECTOR;
DIS-23PFFS-SL8001
RJE60-188-5401
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
Matte Tin (Sn)
2.04
UA-20BMFA-SL8001
USB CONNECTOR;
MUSB-A111-M0
MUSB-A111-M0 by Amphenol is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm, suitable for telecom & datacom applications. With a temperature range from -40 to 105°C, it has a right-angle mounting style and solder termination for easy installation.
GSB321131HR
GSB321131HR by Amphenol is a USB connector with 9 contacts, featuring phosphor bronze contact material and liquid crystal polymer insulator. It has a right-angle mounting style, solder termination type, and nickel shell finish. Ideal for telecom & datacom applications due to its UL 94V-0 flammability code.
GOLD (30) OVER NICKEL
BRASS
9
© 2023 All rights reserved
