Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol MRJ-5385-01 is a telecom & datacom connector with gold-plated contacts, 500M ohm insulation resistance, and 1.5A signal current rating. Ideal for board mounting in applications requiring high durability and reliability, with operating temperatures from -40 to 105°C.
Median Price
$12.800
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$12.500
1k+ parts
10k+ parts
Powell Electronics
Verical
$14.194
Farnell
$19.270
Arrow
$8.562
Nova Conductors
$10.150
Electro Sonic
$16.020
$9.690
Vyrian
Rapid Electronics
IBS Electronics
$14.979
TME
$13.600
Q Components
AZTECH Wire
$1.170
$1.120
$1.100
$1.080
Ampacity Inc.
$7.100
Semicontronic
$6.922
$6.887
Aztec Data Supply Inc.
$7.586
Gateway Technologies
$9.033
Continental Prestige Electronics
$9.947
Bastille Electronics
$9.642
$9.034
Singapore Electronics
$11.164
$10.382
$9.935
$9.489
Argo Parts USA
Corohmni
Allows for easy installation in various telecom and datacom applications.
Ensures reliable signal transmission by providing high insulation between contacts.
Gold finish provides excellent conductivity and corrosion resistance, while nickel barrier ensures durability and longevity.
Phosphor bronze offers good electrical conductivity and high strength, enhancing the performance and reliability of the connector.
Zinc alloy shell provides robust protection and shielding for the connector, enhancing its durability and reliability.
Right angle mounting option allows for space-saving installation in tight spaces and provides a secure connection.
Can handle high signal currents, making it suitable for various telecom and datacom applications.
Withstands multiple mating cycles, ensuring long-term reliability and performance.
Telecom & Datacom Connectors MRJ-5385-01 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
MRJ-5385-01 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
HDRA-E68LFDT1
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
PCR-E96LMD+
PCR-E96LMD+ by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with 0.05" pitch, gold-plated contacts, and UL94V-0 flammability rating. It features a dielectric strength of 1100VAC, operating temperatures from -55 to 105°C, and solder termination for board mounting applications. Ideal for commercial use in telecommunications and data communication systems requiring high reliability.
614004135023
Wuerth Elektronik & Kg
614004135023 USB connector by Wurth Elektronik features gold termination, polybutylene terephthalate insulator, and copper alloy contacts. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring a durable, polarized housing with solderable retention clips. Operating b/w -40 to 105°C, this female receptacle offers reliable signal current of 1.5A and UL-rated flammability.
5406299-1
TE Connectivity
TE Connectivity 5406299-1 is a Telecom & Datacom Connector with EMI shielding, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts. It has a body size of 0.7" x 0.57" x 0.54", rated for 1.5A signal current, and suitable for board and panel mounting in telecom applications.
1734098-5
TE Connectivity's 1734098-5 is a Telecom & Datacom Connector with Polyester insulator, operating from -35 to 85°C. Featuring 50 contacts, it has a UL Flammability Code of 94V-0 and supports flat ribbon cables. Ideal for telecom and datacom applications requiring a rated current of 1.5A.
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
74320-9014
Molex
Molex 74320-9014 is a Telecom & Datacom Connector with 29 contacts, rated at 3A. It features a glass-filled polymer insulator, tin-plated finish, and operates b/w -20°C to 85°C. Ideal for board and panel mounting in commercial applications.
10150-6000EC
3m Electronic Products Division
10150-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications due to its gold over nickel termination contact finish, glass-filled polyester insulator material, and beryllium copper contact material.
692221030100
692221030100 by Wurth Elektronik is a USB connector with 9 contacts, rated at 1.8A signal current. It features a POLYBUTYLENE TEREPHTHALATE insulator and PHOSPHOR BRONZE contact material. Ideal for telecom & datacom applications, it has a durability of 5000 cycles and operates b/w -20 to 85°C.
ARJE-0025
Abracon
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1734099-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
241006
Lumberg Connect
The Lumberg Connect 241006 USB connector has a body length of 0.516" and insulation resistance of 1 Gohm. With a shell material of steel, it is designed for telecom & datacom applications. Featuring a right angle mounting style and surface mount termination type, this connector offers durability with 1500 cycles.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
09455511100
Harting Electronics & Kg
09455511100 by Harting Electronics & Kg is a Telecom & Datacom Connector with body width of 0.463", termination contact finish of TIN OVER NICKEL, and insulator material NYLON46. It is used in applications requiring a right angle mounting style, surface mount termination type, and rated current signal of 1.5A.
292303-4
TE Connectivity's 292303-4 is a Telecom & Datacom Connector with 0.575" body length, POLYETHYLENE insulator, and 1000000000 ohm insulation resistance. Ideal for board mounting with solderable retention clips, it operates b/w -55 to 85 °C and has a durability of 1500 cycles.
897-43-005-00-100001
Mill-max Mfg
Mill-max Mfg's 897-43-005-00-100001 USB connector has 0.303" body length, 0.156" width, and 0.362" depth. With 100VAC dielectric voltage, it suits telecom/datacom applications. Features include POLYETHYLENE insulator, TIN finish, and 30u plating thickness for durability in board mounting with a surface mount termination type.
SI-51009-F
Bel Fuse
Bel Fuse SI-51009-F is a telecom & datacom connector with dielectric voltage of 2100VAC. Featuring 8 contacts, it has a body length of 0.635", width of 0.55", and depth of 1". Ideal for board and panel mounting, this female jack connector uses solder termination and polyethylene insulator material.
JXD0-4015NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
5622-1200-ML
5622-1200-ML by 3M is a telecom & datacom connector with body dimensions of 1.593" x 0.266" x 0.507". It features insulation resistance of 1G ohm, dielectric voltage withstand of 500VAC, and gold-nickel mating contacts. Ideal for commercial applications requiring reliable male connectors with surface mount termination in black insulator color.
RJHSE-538B-02
Amphenol
RJHSE-538B-02 by Amphenol is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -55°C to 85°C. Ideal for telecom applications due to its durability of 750 cycles and UL reference standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MRJ-5381-M1
Amphenol MRJ-5381-M1 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features gold over nickel mating contact finish, polyethylene insulator material, and staggered PCB contact pattern. Ideal for commercial applications requiring durable connectors with high insulation resistance and wide operating temperature range from -40 to 105°C.
MRJ-5381-01
Amphenol MRJ-5381-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a right-angle mounting style, POLYETHYLENE insulator, and operates b/w -40 to 105°C. Ideal for telecom and datacom applications due to its durability of 2500 cycles and UL flammability rating of 94V-0.
MRJ-5381-013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (50) OVER NICKEL (50);
MRJ-5384-M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Rated Current - Signal: 1.5 A;
MRJ-5480-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 30 mohm; No. of Ports: 1;
MRJ-5780-01
Amphenol MRJ-5780-01 is a Telecom & Datacom Connector with 8 contacts. It features Matte Tin finish, Polyethylene insulator, and Zinc Alloy shell. Ideal for board mounting applications in telecom and datacom systems due to its right angle receptacle design and gold over nickel mating contact finish.
MRJ-5381-012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Insulation Resistance: 500000000 ohm; Contact Pattern: RECTANGULAR;
MRJ-5380-01
Amphenol MRJ-5380-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a body length of 1.193", width of 0.709", and depth of 1.061". Ideal for applications requiring durability, reliability, and operating temperatures ranging from -40 to 105°C.
MRJ-5481-01
Amphenol's MRJ-5481-01 is a telecom and datacom connector with insulation resistance of 500MΩ, dielectric voltage of 1500VAC, and gold over nickel termination. It is used for board and panel mounting in applications requiring reliable signal transmission.
MRJ-5485-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Rated Current - Signal: 1.5 A; Polarization Key: POLARIZED HOUSING;
MRJ-5184-PF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL;
MRJ-5780-M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Empty Shell: NO; Contact Style: TELCOM, MODULAR;
MRJ-5385-M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Durability: 2500 Cycles; UL Flammability Code: 94V-0;
MRJ-5385-P1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; DIN Conformance: NO;
MRJ-538A-B1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Board Mounting Option: PEG; Terminal Length: .15 inch; Mating Contact Finish: AU ON NI;
MRJ-538D-B1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Rated Current - Signal: 1.5 A; Terminal Length: .15 inch; Contact Material: PHOSPHOR BRONZE;
MRJ-538D-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: BOARD; Contact Resistance: 30 mohm; Mounting Option-2: LOCKING;
MRJ-538E-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: TELCOM, MODULAR; Shell Material: ZINC ALLOY; Body Width: .709 inch;
MRJ-5384-B1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; JESD-609 Code: e4; Mounting Option-2: LOCKING;
MRJ-5385-B1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mounting Option-1: #4-40;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved