Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR;
Median Price
$1.080
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
$1.320
100+ parts
1k+ parts
10k+ parts
DigiKey
$2.980
$2.149
$1.856
$1.618
Arrow
-
$0.958
Verical
Chip1Stop
TTI
$1.200
$1.110
Master Electronics
$1.019
$0.969
Nova Conductors
$2.015
Vyrian
VNN
Electro Sonic
$1.160
$1.050
IBS Electronics
$1.429
$1.374
Ampacity Inc.
$0.500
Semicontronic
$1.100
$1.072
$1.067
Argo Parts USA
$1.892
Bastille Electronics
$1.914
$1.819
$1.793
Corohmni
$2.841
Aztec Data Supply Inc.
$3.046
Infinite Electronics LLP (Excess)
Perfect Parts
Telecom & Datacom Connectors 124019032112A attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Communications Solutions
Connector Type:
124019032112A Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Silicon Transistor
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Loras Industries
Dc Components
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Continental Device India
85513-5109
Molex
Molex 85513-5109 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Insulation resistance of 500MOhm and operating temperature range from -40 to +85°C make it ideal for commercial applications requiring durability up to 1250 cycles.
RJHSE-5384-06
Amphenol Communications Solutions
48037-1000
The Molex 48037-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this connector has a durable steel shell, surface mount termination, and is rated for 1500 cycles.
RB1-125BAG1A
Ude
RB1-125BAG1A by Ude is a Telecom & Datacom Connector with 8 contacts. Features include Matte Tin over Nickel termination, Polyethylene insulator, and Gold Flash over Nickel mating contact finish. Ideal for board mounting applications requiring female connectors with right angle mounting style.
HR911105A
Hanrun Electronics
HR911105A by Hanrun Electronics is a Telecom & Datacom Connector with 8 contacts, female gender, and right angle mounting style. It is used for board mounting with solder termination in telecom and datacom applications.
RJE60-188-5401
Amphenol
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
2120892-1
TE Connectivity 2120892-1 is a EMI shielded telecom connector with 0.69" body depth and polyethylene insulator. It operates b/w -40 to 85°C, suitable for telecom and datacom applications requiring up to 8 contacts.
SS-39200-011
Bel Fuse
Bel Fuse SS-39200-011 is a Telecom & Datacom Connector with Gold finish, Polycarbonate insulator, and Copper Alloy contacts. It has 8 contacts, operates b/w -40 to 85°C, and offers durability of 750 cycles. Ideal for commercial applications requiring reliable crimp termination in telecom and datacom systems.
12401598E4#2A
AMPHENOL ICC
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Contact Material: COPPER ALLOY; Insulator Material: POLYMER;
3-1734035-2
TE Connectivity 3-1734035-2 USB connector has a temp range of -40 to 85°C. With 5 contacts, it's rated for 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications with surface mount termination on boards.
PX0845/A
Bulgin
Bulgin's PX0845/A USB connector features gold termination, polyamide6 insulator, and nickel shell finish. Ideal for telecom/datacom applications, with 4 contacts, solder termination, and steel shell material. Male contact gender suitable for board/panel mounting in 94V-0 UL flammability code environments.
2294415-2
TE Connectivity 2294415-2 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. Ideal for telecom applications, it has a body size of 0.386" x 0.29" x 0.551", operates b/w -40°C to 85°C, and features right-angle mounting with surface mount termination.
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
NE8FBH-LED
Neutrik Ag
NE8FBH-LED by Neutrik Ag is a telecom & datacom connector with 8 contacts, GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, and NICKEL shell finish. Ideal for board and panel mounting, it features a ZINC ALLOY shell material and RIGHT ANGLE mounting style.
10136-6000EC
3m Electronic Products Division
10136-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
87824-0010
Molex 87824-0010 is a Telecom & Datacom Connector with 29 contacts, Matte Tin finish, and Glass Filled Liquid Crystal Polymer insulator. It has a body length of 1.682", suitable for board mounting applications in telecom and datacom systems. The connector is polarized, durable up to 500 cycles, and operates b/w 0°C to 55°C temperature range.
RJHSE-5384-04
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; PCB Contact Pattern: STAGGERED;
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
749621-7
TE Connectivity 749621-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. It operates b/w -55°C to 105°C, ideal for commercial applications requiring high insulation resistance of 1Gohm. The connector features TIN lead over nickel termination finish and polyethylene insulator material for reliable performance in cable mounting setups.
RJHSE-3380-A1
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol Icc
Amphenol's 12401598E4#2A USB connector features gold flash termination, polymer insulator, and nickel shell finish. With 24 contacts, it is ideal for telecom & datacom applications requiring surface mount board mounting in a right angle configuration.
12401610E4#2A
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2; Mounting Type: BOARD;
The Amphenol 12401610E4#2A is a telecom & datacom connector with dimensions of 0.361" x 0.129" x 0.413". It features 24 contacts, rated for 5A signal current, UL94V-0 flammability. This female USB connector has a right-angle mounting style and surface mount termination, suitable for board applications.
124018612112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; PCB Contact Row Spacing (mm): 1.25; Body Depth: .341 inch;
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Mounting Type: BOARD; Shell Finish: NICKEL;
124018802112A
USB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
124018312112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Termination Contact Finish: Gold Flash (Au) - with Nickel (Ni) barrier;
Amphenol's 124018312112A USB connector features gold flash termination with nickel barrier, plastic insulator, and stainless steel shell. With 24 contacts, it is ideal for telecom & datacom applications requiring waterproof right angle mounting on boards and panels.
124019772112A
USB CONNECTOR;
12401899E412A
The Amphenol Communications Solutions 12401899E412A is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom and datacom applications. With a waterproof option and stainless steel shell material, it offers durability with 10k cycles.
12401826E412A
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of PCB Rows: 2; PCB Contact Row Spacing (mm): 1.7;
12401548E4#2A
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
12402012E212A
The Amphenol Communications Solutions 12402012E212A USB connector features a body length of 0.352", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this male connector has a total of 24 contacts, rated at 5A signal current, with a durability of 10k cycles.
124019572112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; Polarization Key: POLARIZED HOUSING; Mating Contact Row Spacing (inch): 0.028;
124018402112A
Telecom and Datacom Connectors;
124019362112A
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved