Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HDRA-EC68FDT+ by Honda Tsushin Kogyo is a Telecom & Datacom Connector with 68 contacts, made of Polyamide9T insulator and nickel shell finish. It is a female connector for board and panel mounting, featuring steel shell material and solder termination. Ideal for telecom and datacom applications due to its UL Flammability Code of 94V-0.
Median Price
$7.270
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Verical
1+ parts
$6.950
100+ parts
$6.090
1k+ parts
10k+ parts
Chip1Stop
-
$7.590
Nova Conductors
$18.293
Vyrian
IBS Electronics
$6.575
AZTECH Wire
$6.450
$6.190
$6.070
$5.950
Aztec Data Supply Inc.
$8.670
Corohmni
$9.203
Continental Prestige Electronics
$18.026
$17.666
Bastille Electronics
$18.290
$17.376
$16.278
Authorized Procurement Solutions
Argo Parts USA
S.R.D Solutions
Advanced Electronics
Polyamide9T is known for its high strength and flame retardant properties, making it a reliable choice for telecom and datacom connectors that require durability and safety.
Nickel provides excellent resistance to corrosion and wear, ensuring a longer lifespan for the connectors in various environmental conditions, making it a preferred choice for long-term usage.
Specifically designed for telecom and datacom applications, this connector ensures compatibility and optimal performance in communication systems, making it a suitable choice for such requirements.
Having a UL 94V-0 flammability rating indicates that the connector meets industry standards for fire resistance, providing an added safety feature in case of potential electrical hazards, making it a secure choice for installations.
With 68 contacts, this connector offers ample connectivity options for various data and communication channels, allowing for more versatility and flexibility in networking setups, making it suitable for complex systems.
Supports both board and panel mounting options, offering versatility in installation methods based on the specific needs of the application, making it adaptable to different hardware configurations.
Steel construction provides strength and durability to the connector, ensuring robustness in high-traffic and heavy-use environments, making it a reliable choice for long-lasting connectivity solutions.
Solder termination ensures a secure and stable connection between components, reducing the risk of signal loss or interference, making it a preferred choice for maintaining reliable data transmission.
Female contacts are commonly used in connectors to match with male counterparts, providing a reliable and secure interface for data transmission, making it a standard choice for connectivity solutions.
Straight mounting style simplifies the installation process and ensures a neat and organized layout of connectors, making it easier to manage cable connections and maintain a tidy appearance in networking setups.
Telecom & Datacom Connectors HDRA-EC68FDT+ attributes and parameters. Explore more Telecom & Datacom Connectors devices from Honda Tsushin Kogyo
Additional Features:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
HDRA-EC68FDT+ Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Honda Tsushin Kogyo is a Connector Global Developer and Manufacturer specializing in the Connector components connecting through Wire & Fiber optics. We provide a lot of joy and impression by "connecting" for a prosperous future.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Semitronics
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Gulf Semiconductor
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
12401610E4#2A
AMPHENOL ICC
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2; Mounting Type: BOARD;
5555167-1
TE Connectivity
TE Connectivity 5555167-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting applications in telecom and datacom equipment.
12401826E412A
Amphenol Communications Solutions
The Amphenol Communications Solutions 12401826E412A USB connector features a body length of 0.362", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a matte tin over nickel finish, black insulator color, and is rated for 5A signal current.
DCP-USBNB-MNSC
Switchcraft
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5-554720-3
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Termination Type: IDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2171790001
Molex
Molex 2171790001 USB connector features 16 contacts, POLYAMIDE insulator, and NICKEL finish. With a rated current of 1.25A, it is ideal for telecom & datacom applications. Operating temperature range from -40 to 85°C makes it suitable for various environments.
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
48404-0003
Molex 48404-0003 USB connector with gold termination, 9 contacts, and blue insulator. Ideal for telecom/datacom applications with right-angle mounting and solder termination. Features staggered PCB contact pattern and durable stainless steel shell.
USB3106-30-0230-A
Global Connector Technology
USB3106-30-0230-A by Global Connector Technology is a USB connector with 5 contacts, rated current of 1A, and insulation resistance of 1GΩ. It is commonly used in telecom and datacom applications for board mounting with a straight shell style.
USB-RS232-WE-1800-BT_5.0
FTDI
USB-RS232-WE-1800-BT_5.0 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
1054550101
Molex 1054550101 USB connector features thermoplastic insulator, nickel shell finish, and 24 contacts. With a rated current of 5A, it is ideal for telecom & datacom applications. The right-angle mounting style and USB 3.1 C contact make it suitable for board mounting with a terminal pitch of 0.5mm.
GSB311231HR
Amphenol
Amphenol GSB311231HR USB Connector with 18 contacts, POLYETHYLENE insulator, and STAINLESS STEEL shell. Ideal for board mounting in telecom/datacom applications due to RIGHT ANGLE mounting style and FEMALE contact gender. Shell finish NICKEL with UL94V-0 flammability code ensures reliability.
3030
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Empty Shell: NO; UL Flammability Code: 94V-0; Mixed Contacts: NO; Mounting Type: BOARD;
CX80B1-24P
Hirose Electric
CX80B1-24P by Hirose Electric is a USB connector with 24 contacts. It features gold termination contact finish, polyethylene insulator material, and nickel shell finish. This connector is commonly used in telecom and datacom applications for surface mount board mounting.
RJHSE-3381
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
MUSB-05-F-B-SM-A-FR
Samtec
Samtec's MUSB-05-F-B-SM-A-FR is a USB connector with LIQUID CRYSTAL POLYMER insulator, suitable for Telecom & Datacom applications. Featuring 5 contacts, it has a durability of 1500 cycles and operates b/w -50 to 85°C. With a right-angle mounting style and surface mount termination, it offers a plating thickness of 1u inch.
10118194-0001LF
The Amphenol Communications Solutions 10118194-0001LF is a USB connector with 5 contacts, rated at 1.8A signal current and featuring a micro USB 2.0 contact style. It has a body length of 0.317", insulation resistance of 1000000000 ohm, and operates b/w -30 to 80 °C. Ideal for telecom & datacom applications, it offers durability up to 10000 cycles and features surface mount termination with a right-angle mounting style.
5622-1200-ML
3m Electronic Products Division
5622-1200-ML by 3M is a telecom & datacom connector with body dimensions of 1.593" x 0.266" x 0.507". It features insulation resistance of 1G ohm, dielectric voltage withstand of 500VAC, and gold-nickel mating contacts. Ideal for commercial applications requiring reliable male connectors with surface mount termination in black insulator color.
2-6339191-1
TE Connectivity 2-6339191-1 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a right-angle jack body style and surface mount termination for durability in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDRA-E68LFDT-SL
Honda Tsushin Kogyo
HDRA-E68LFDT-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with a nickel shell finish and polyphenylene sulfide insulator. It features female contacts, solder termination, and right-angle mounting suitable for board and panel applications. The UL 94V-0 flammability code ensures high safety standards.
HDRA-E68LFDT
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Mounting Option-2: LOCKNUT;
HDRA-E68LFDT-OM18+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Empty Shell: NO; Mixed Contacts: NO;
HDRA-E68LFDT-SLA
HDRA-E68LFDT-SLA by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with a mating contact pitch of 0.031". Featuring an insulation resistance of 1Gohm, it has a dielectric voltage rating of 250VAC. This female plug connector, designed for right-angle mounting on boards and panels, uses solder termination and is suitable for commercial applications.
HDRA-E68LFDT-SLC
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
HDRA-E68LFDT1
HDRA-EC68LFDT2+
HDRA-EC68LFDT2+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with polyamide insulator, nickel shell finish, and steel shell material. It features right-angle mounting for board/panel use and female contact gender with solder termination. Ideal for high-density data transmission applications.
HDRA-EC68LFDT2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: STEEL; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
HDRA-E68W2LFDT1EC-SL
HDRA-E68W2LFDT1EC-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with 0.031" pitch, 1.681" body length, and 1000000000 ohm insulation resistance. It features a POLYPHENYLENE SULFIDE insulator, 250VAC dielectric voltage, and 0.3A signal current rating. Ideal for commercial applications requiring reliable board or panel mounting in right-angle configuration.
HDRA-E68W2LFDT1EC-SL+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: OTHER STACKING CONNECTOR: 68 CONTACT, LOW PROFILE; Insulator Material: POLYPHENYLENE SULFIDE; Mixed Contacts: NO;
HDRA-E68W1LFDT1EC-SL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Additional Features: STACKED, 2 PORT, 68 POSITION EACH;
HDRA-E68W1LFDT1EC-SL+
HDRA-E68W1LFDT1EC-SL+ by Honda Tsushin Kogyo is a telecom and datacom connector with a mating contact pitch of 0.031 inches. It has a body length of 1.681 inches and insulation resistance of 500000000 ohms. This connector is commonly used in board and panel mounting applications for commercial purposes.
HDRA-E68W2LFDT1EC+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Filter Feature: NO;
HDRA-E68W2LFDT1EC
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED;
HDRA-E100M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 100; Shell Finish: NICKEL; Mating Contact Finish: NOT SPECIFIED;
HDRA-E68MA1+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VAC; Body Width: .191 inch;
HDRA-E68MA1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; Body Width: .191 inch;
HDRA-E68FYT+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; Contact Style: CENTRONIC;
HDRA-E68FYT
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HDRA-EC68LFDT2-SL+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Mounting Style: RIGHT ANGLE; Mixed Contacts: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved