Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PCR-E96LMD+ by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with 0.05" pitch, gold-plated contacts, and UL94V-0 flammability rating. It features a dielectric strength of 1100VAC, operating temperatures from -55 to 105°C, and solder termination for board mounting applications. Ideal for commercial use in telecommunications and data communication systems requiring high reliability.
Median Price
$11.603
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$11.200
1k+ parts
$8.560
10k+ parts
Verical
$12.006
$11.633
IBS Electronics
$8.537
$8.213
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$8.010
Corohmni
$9.216
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Close mating contact pitch allows for high density connections, making this product suitable for applications where space is limited.
High insulation resistance ensures minimal signal loss and prevents leakage, ensuring reliable performance.
High dielectric voltage allows for safe and reliable operation in high voltage environments.
Gold finish provides excellent conductivity and corrosion resistance, while the nickel barrier enhances durability, ensuring long-lasting performance.
High number of contacts allows for multiple connections in a single connector, making it suitable for complex telecom and datacom applications.
Right angle mounting style allows for easy installation in tight spaces, providing flexibility in setup configurations.
Telecom & Datacom Connectors PCR-E96LMD+ attributes and parameters. Explore more Telecom & Datacom Connectors devices from Honda Tsushin Kogyo
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
PCR-E96LMD+ Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Honda Tsushin Kogyo is a Connector Global Developer and Manufacturer specializing in the Connector components connecting through Wire & Fiber optics. We provide a lot of joy and impression by "connecting" for a prosperous future.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
USB4056-03-A-0140
Global Connector Technology
USB4056-03-A-0140 by Global Connector Technology is a USB connector with 24 contacts, rated at 6.25A signal current. It features liquid crystal polymer insulation, nickel shell finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -25 to 85°C temperatures.
UE75-A20-6000T
Amphenol
Amphenol UE75-A20-6000T is a Telecom & Datacom Connector with Matte Tin over Nickel finish, Liquid Crystal Polymer insulator, and Phosphor Bronze contacts. It operates b/w -40°C to 85°C, has 20 gold-plated contacts, and is a surface mount receptacle for telecom/datacom applications.
5555164-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Type: BOARD AND PANEL; Mating Contact Finish: GOLD (50) OVER NICKEL;
48406-0003
Molex
Molex 48406-0003 is a USB connector with 9 contacts, POLYETHYLENE insulator, and FEMALE contact gender. Ideal for Telecom & Datacom applications, it features RIGHT ANGLE mounting on BOARD with SOLDER termination.
47589-1001
The Molex 47589-1001 is a USB connector with 5 contacts and a surface mount termination type. It has an insulation resistance of 1GΩ, dielectric withstand voltage of 100VAC, and can operate in temperatures ranging from -30°C to 85°C. This connector is commonly used in telecom and datacom applications due to its durability (10k cycles) and commercial reliability.
1932258-1
TE Connectivity
TE Connectivity 1932258-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features include 100M ohm insulation resistance, 105°C max operating temp, and 1.8A signal current rating. Ideal for board mounting with solderable retention clips and staggered PCB contact pattern.
6339191-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Polarization Key: POLARIZED HOUSING; Contact Style: TELCOM, MODULAR;
GSB4211311WEU
AMPHENOL ICC
GSB4211311WEU by Amphenol Icc is a USB connector with a nickel shell finish and a total of 4 contacts. It is made of polybutylene terephthalate/polyethylene insulator material and has a copper alloy shell. This connector is commonly used in telecom and datacom applications for board mounting in a right angle configuration.
2013595-3
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
12402012E212A
Amphenol Communications Solutions
The Amphenol Communications Solutions 12402012E212A USB connector features a body length of 0.352", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this male connector has a total of 24 contacts, rated at 5A signal current, with a durability of 10k cycles.
MUSBR-M1C1-30
MUSBR-M1C1-30 by Amphenol is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1000000000 ohm. Ideal for telecom & datacom applications, it has a durable zinc alloy shell and operates b/w -40 to 105 °C.
1932055-1
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
2171800001
TELECOM AND DATACOM CONNECTOR;
HDRA-EC68LFDT2
Honda Tsushin Kogyo
HDRA-EC68LFDT2 by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with polyamide insulator, nickel shell finish, and steel shell material. It features female contacts for solder termination and right-angle mounting suitable for board and panel applications. This UL 94V-0 rated connector is ideal for telecommunications and data communication equipment.
12401548E4#2A
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
ZX62RD-AB-5P8(30)
Hirose Electric
ZX62RD-AB-5P8(30) by Hirose Electric is a USB connector with 5 gold contacts, liquid crystal polymer insulator, and stainless steel shell. It is used in telecom/datacom applications for surface mount on boards/panels due to its UL 94V-0 flammability rating and right-angle mounting style.
10226-6212PL
3m Electronic Products Division
10226-6212PL by 3M Electronic Products Division is a Telecom & Datacom Connector with 26 contacts, solder termination, and female contact gender. It is a board-mounted receptacle connector used in telecom and datacom applications for straight mounting style requirements.
47642-0001
Molex 47642-0001 USB connector with gold finish, liquid crystal polymer insulator, and flash plating. Ideal for telecom/datacom applications with 5 contacts, right-angle mounting, and surface mount termination. Operating temperature range from -30 to 85°C ensures reliability in commercial settings.
CX60-24S-UNIT
USB CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
ZX62D-B-5P8(30)
The Hirose Electric ZX62D-B-5P8(30) USB connector has gold termination finish, 5 contacts, and rated current of 1.8A. With operating temperatures from -30 to 85°C, it is ideal for telecom & datacom applications requiring a male surface mount USB 2.0 connector with right angle mounting and locking option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCR-E20FS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Width: .287 inch;
PCR-E20FS+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Termination Type: SOLDER;
PCR-E96LMDA+
PCR-E96LMDA+ by Honda Tsushin Kogyo is a telecom & datacom connector with 96 contacts, 2 rows, and a mating contact pitch of 0.05". It features an insulation resistance of 1Gohm, dielectric voltage of 1100VAC, and operates b/w -55 to +105°C. Ideal for board and panel mounting in commercial applications.
PCR-E96LMDA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (8) OVER NICKEL; Mounting Type: BOARD AND PANEL;
PCR-E96LMD
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mounting Style: RIGHT ANGLE;
PCR-E96LMDC+
PCR-E96LMDC+ by Honda Tsushin Kogyo is a telecom & datacom connector with 96 contacts, 2 rows, and 4 PCB rows. It features a mating contact pitch of 0.05", insulation resistance of 1Gohm, and dielectric voltage of 1100VAC. Ideal for commercial applications, it has a temperature range from -55 to +105°C and uses solder termination on a right-angle mounting style.
PCR-E20FA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; JESD-609 Code: e0; UL Flammability Code: 94V-0;
PCR-E68FS+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Empty Shell: NO; DIN Conformance: NO;
PCR-E20FA+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Wire Size: 28 AWG;
PCR-E68FS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO;
PCR-E96PMA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Shell Finish: NICKEL;
PCR-E20LMD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Rated Current - Signal: 1 A;
PCR-E28LMD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Body Width: .413 inch;
PCR-E36LMD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Mounting Type: BOARD AND PANEL;
PCR-E50LMD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Contact Material: PHOSPHOR BRONZE;
PCR-E50LMDA+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Terminal Pitch (mm): 1.27;
PCR-E50MD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Insulator Color: BLACK;
PCR-E96MD+
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1100VAC; Shell Finish: NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved