Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RJHSE-538B-02 by Amphenol is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -55°C to 85°C. Ideal for telecom applications due to its durability of 750 cycles and UL reference standard compliance.
Median Price
$4.370
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$2.165
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$6.220
$4.470
$4.100
Verical
Master Electronics
$4.690
$3.960
$3.830
Chip1Stop
$3.930
$3.560
DigiKey
$5.480
Powell Electronics
$4.050
$3.910
Nova Conductors
$3.649
Vyrian
Rapid Electronics
IBS Electronics
$4.850
$3.825
NAC Semi
$4.620
$4.270
AZTECH Wire
$0.660
$0.630
$0.620
$0.610
Ampacity Inc.
$1.860
Aranea Global
$3.576
$3.433
Gateway Technologies
$3.628
$3.229
Continental Prestige Electronics
Argo Parts USA
Singapore Electronics
$3.991
$3.711
$3.551
$3.392
Authorized Procurement Solutions
Assy Fe
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Eastek
1.27 inch - Ideal for use in compact spaces without sacrificing functionality.
500000000 ohm - Ensures reliable and secure data transmission.
0.53 inch - Accommodates tight PCB layouts while maintaining durability.
1000VAC - Provides excellent electrical insulation for safe operation.
Matte Tin (Sn) - with Nickel (Ni) barrier - Ensures strong and lasting connections between components.
POLYETHYLENE - Offers high resistance to heat and chemicals for long-lasting performance.
SPLIT BOARD LOCK - Allows for easy and secure installation on circuit boards.
85 °C - Suitable for various environments and applications.
55 °C - Ensures reliable performance even in extreme cold conditions.
50u - Provides corrosion resistance for extended product lifespan.
TELECOM AND DATACOM CONNECTOR - Designed specifically for telecommunications and data communication applications.
PHOSPHOR BRONZE - Offers excellent conductivity for efficient signal transmission.
GOLD (50) OVER NICKEL (50) - Ensures low contact resistance and minimal signal loss.
1.5 A - Capable of handling standard signal currents with ease.
BLACK - Provides a sleek and professional appearance.
UL - Meets industry standards for safety and quality assurance.
8 - Allows for multiple connections for versatile applications.
750 Cycles - Ensures long-lasting performance through repeated use.
BOARD - Provides a secure and stable connection to circuit boards.
COPPER ALLOY - Offers durability and resistance to wear and tear.
2.032 mm - Allows for high-density PCB designs with precise spacing.
STAGGERED - Facilitates efficient signal transmission and prevents interference.
SOLDER - Provides a reliable and robust connection between components.
MALE - Compatible with standard female connectors for seamless integration.
20 mohm - Ensures minimal signal loss for high-quality data transmission.
JACK - Allows for easy and secure connection and disconnection.
RIGHT ANGLE - Enables space-saving installation in confined areas.
TELECOM, MODULAR - Designed for specific telecom and datacom applications.
MOUNTING FLANGE - Provides additional stability and security during installation.
0.1 inch - Offers secure contact points for reliable signal transmission.
LOCKING - Ensures a secure and stable connection between components.
COMMERCIAL - Meets industry standards for dependable performance.
Telecom & Datacom Connectors RJHSE-538B-02 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJHSE-538B-02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - RJHSE Shield Material 30/Jun/2015
PCN Assembly/Origin - Mult Devs Location 20/Dec/2023
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
ERJ3EKF1002V
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
BAV99WT1G
Fairchild Semiconductor
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Infineon Technologies
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
09451511560
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
615008137421
Wuerth Elektronik & Kg
615008137421 by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, gold finish, and 500 cycles durability. It has a dielectric voltage of 1000VAC and insulation resistance of 500M ohm. Ideal for telecom and datacom applications requiring reliable signal transmission in temperatures ranging from -40 to 85°C.
PX0443
Bulgin
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2-1734035-1
TE Connectivity
TE Connectivity's 2-1734035-1 USB connector features GLASS FILLED POLYAMIDE9T insulator, NICKEL shell finish, and 29.92u plating thickness. With a rated current of 1A, it is ideal for telecom applications requiring board mounting with locating post option. Operating temperature ranges from -40 to 85 °C.
09454521924
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
74441-0007
Molex
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
7499011212A
7499011212A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy shell material, and Solder termination type. Ideal for board mounting in applications requiring right angle mounting style.
A00-216-262-450
Edac
TELECOM AND DATACOM CONNECTOR; Contact Material: PHOSPHOR BRONZE; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: GOLD FLASH OVER NICKEL;
48393-0003
Molex 48393-0003 USB connector features POLYETHYLENE insulator, 9 contacts, and 1.8A signal current rating. Ideal for telecom/datacom applications with right-angle mounting and staggered PCB contact pattern.
954
Keystone Electronics
USB CONNECTOR;
UE86-3G4420-60361
Amphenol
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86-3G4420;
1734366-1
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel; No. of Rows Loaded: 1;
UX60SC-MB-5ST
Hirose Electric
The Hirose Electric UX60SC-MB-5ST is a USB connector with 5 contacts, featuring a tin finish and surface mount termination. Ideal for telecom & datacom applications, it offers a right-angle mounting style and copper alloy shell material. The connector is UL 94V-0 flammability rated, with a filter feature for improved performance.
USB3131-30-0230-A
Global Connector Technology
USB3131-30-0230-A by Global Connector Technology is a USB connector with 5 contacts, gold over nickel finish, and liquid crystal polymer insulator. It is used in telecom & datacom applications, has a dielectric voltage of 100VAC, and operates b/w -55 to 85°C.
5555153-1
TE Connectivity 5555153-1 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and 500M ohm insulation resistance. Ideal for board mounting with split board lock option, it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
67329-8000
Molex 67329-8000 USB connector has 0.276" body length, 0.57" width, and 0.539" depth. With 1A signal current rating, it's ideal for telecom/datacom applications. Features include tin contact finish, glass-filled polyamide insulator, and solder termination for durability.
74320-4000
The Molex 74320-4000 is a telecom and datacom connector with a body length of 0.145", body width of 0.39", and body depth of 0.454". It is used for board and panel mounting in commercial applications, with a rated current of 3A and an operating temperature range from -20°C to 85°C.
10118192-0001LF
Amphenol Communications Solutions
Amphenol's 10118192-0001LF USB connector features gold over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. Ideal for telecom/datacom applications, with 100VAC dielectric voltage, 5 contacts, and 80°C max operating temp. Perfect for board mounting with right-angle style and surface mount termination.
RJHSE-5384
RJHSE-5384 by Amphenol is a Telecom & Datacom Connector with 8 contacts, made of stainless steel shell and phosphor bronze contact material. It has a body length of 0.65", width of 0.53", and depth of 0.62". Ideal for board and panel mounting applications, it features matte tin termination finish, UL flammability code 94V-0, and operates b/w -55 to 85°C.
RJHSE-3381
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJHSE-3381-A1
Amphenol RJHSE-3381-A1 is a Telecom & Datacom Connector with 8 contacts, featuring Matte Tin over Nickel termination finish and Polyethylene insulator. Ideal for board and panel mounting, it uses Phosphor Bronze contact material and Gold over Nickel mating finish. Suitable for telecom applications requiring reliable female connectors.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: MATTE TIN OVER NICKEL; DIN Conformance: NO;
RJHSE-5080-04
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
TELECOM AND DATACOM CONNECTOR;
RJHSE-5080-08
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm; Rated Current - Signal: 1.5 A;
RJHSE-5080-A2
RJHSE-5381-02
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
RJHSE-5381-03
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; IEC Conformity: NO; Body or Shell Style: JACK;
Amphenol RJHSE-5381-03 is a telecom & datacom connector with 24 contacts, featuring matte tin finish with nickel barrier. It uses phosphor bronze contact material and gold over nickel mating finish. Ideal for board and panel mounting in telecom applications.
RJHSE-5080
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: PHOSPHOR BRONZE; Filter Feature: NO;
RJHSE-5080-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .52 inch; Plating Thickness (inch): 50u; Filter Feature: NO;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Termination Type: SOLDER; Total No. of Contacts: 16;
RJHSE-3381 by Amphenol is a telecom & datacom connector with 8 contacts, made of copper alloy. It features matte tin termination finish, gold mating contact finish over nickel, and polarization key for polarized housing. Ideal for board and panel mounting in commercial applications with operating temperatures from -55°C to 85°C.
RJHSE-5380-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Option-1: LOCKING; PCB Contact Row Spacing (mm): 1.78;
Amphenol RJHSE-5380-02 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features insulation resistance of 500MΩ, dielectric voltage withstand of 1000VAC, and durability for 750 cycles. Ideal for board mounting in applications requiring reliable male connectors with right-angle mounting style.
RJHSE-538108
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Pitch (mm): 2.032; Mating Contact Finish: AU ON NI; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
RJHSE-5380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .65 inch; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved