Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 85502-5005 is a Telecom & Datacom Connector with 0.465" x 0.453" body dimensions and matte tin over nickel finish. It features glass-filled liquid crystal polymer insulator, solder holding posts for board mounting, and brass contacts. Ideal for surface mount applications in telecom and datacom systems due to its right angle jack design with locking mounting option.
Median Price
$1.545
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Farnell
1+ parts
$1.140
100+ parts
$0.980
1k+ parts
$0.960
10k+ parts
-
Adafruit Industries
$1.520
Mouser Electronics
$2.430
$1.790
$1.590
DigiKey
$2.520
$1.773
Element14
$2.522
$2.463
Verical
$1.540
TTI Europe
$1.307
$1.122
Arrow
PEI Genesis
TTI
$1.330
$1.280
Newark
$1.550
Powell Electronics
$1.430
$1.370
Chip1Stop
$1.580
RS (Exports)
$2.526
$2.424
Digiode
$1.254
EXC GmbH
$1.403
Nova Conductors
$1.490
TME
$2.080
$1.160
$1.130
NAC Semi
Vyrian
ComSIT Distribution GmbH
IBS Electronics
$1.762
$1.480
NexGen Digital
VNN
EMSNET
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
Greenchips
Martec Srl
Semicontronic
$1.110
$1.082
$1.077
Corphita
$1.188
Argo Parts USA
Aranea Global
$1.460
$1.402
Aztec Data Supply Inc.
$1.513
Advanced Electronics
Andel Nordic
$3.988
$3.828
Modulus Dynamics
$4.124
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Abacus Technologies
Authorized Procurement Solutions
Kepictronics
Assy Fe
Continental Prestige Electronics
$1.400
Futuretech Components
Computer Components Inc. - USA
EMSNET (Excess)
The compact size of the body makes it suitable for applications where space is limited, allowing for a more efficient use of available space on the PCB.
The matte tin over nickel finish provides excellent corrosion resistance and ensures reliable electrical conductivity, increasing the overall durability and performance of the connector.
The use of glass-filled liquid crystal polymer as an insulator material offers excellent mechanical strength, thermal stability, and resistance to environmental factors, making the connector suitable for harsh operating conditions.
Having 4 contacts allows for multiple connections to be made simultaneously, enhancing the versatility and functionality of the connector in telecom and datacom applications.
The board mounting option provides a secure and stable attachment to the PCB, reducing the risk of connection failure or disconnection during operation.
The surface mount termination type simplifies the installation process and saves valuable assembly time, making it a convenient choice for high-volume production.
The right-angle mounting style allows the connector to be positioned at a 90° angle to the PCB, providing flexibility in orientation and improving the overall layout efficiency of the system.
Telecom & Datacom Connectors 85502-5005 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
PCB Contact Pattern:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
85502-5005 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 09/Sep/2015 Mult Devs Alt Sourcing 18/Nov/2021
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Grande Electronics
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Secos
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
555164-1
TE Connectivity 555164-1 is a Telecom & Datacom Connector with 0.7" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its right angle jack design, gold mating contact finish, and polarized housing key.
6-569550-3
Commscope
The Commscope 6-569550-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator and shell material. It features 8 contacts, IDC termination type, and UL Flammability Code 1863. Ideal for cable mounting applications requiring male plug connectors in telecom and datacom systems.
SI-60062-F
Bel Fuse
Bel Fuse SI-60062-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 0.85" depth. Featuring 8 contacts, POLYETHYLENE insulator, and TIN SILVER COPPER finish, it operates b/w -40°C to 85°C. Ideal for board and panel mounting in telecommunications and data communication applications.
09454521921
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
632723100011
Wuerth Elektronik & Kg
632723100011 by Wurth Elektronik is a USB connector with 24 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom/datacom applications, it features brass contacts, solder/surface mount termination, and 94V-0 flammability rating.
1656990
Phoenix Contact
The Phoenix Contact 1656990 is a Telecom & Datacom Connector with GOLD OVER NICKEL finish. It features POLYAMIDE insulator material and COPPER ALLOY contacts. Ideal for applications requiring 8 male contacts, IDC termination, and 94V-0 UL Flammability Code in cable mounting setups.
67068-9000
Molex
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
2301994-1
TE Connectivity's 2301994-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and operates b/w -40°C to 85°C. Ideal for telecommunications and data communication applications requiring secure board mounting.
RJHSE-5080-08
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm; Rated Current - Signal: 1.5 A;
2171750001
TELECOM AND DATACOM CONNECTOR;
67329-8001
The Molex 67329-8001 USB connector features a body length of 0.57", insulation resistance of 1000000000 ohm, and dielectric voltage of 1050VAC. Ideal for telecom/datacom applications, this male connector has a gold contact finish, glass-filled polyamide insulator, and is rated for 1500 cycles durability.
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
5787745-2
TE Connectivity USB Connector 5787745-2 features POLYETHYLENE insulator, 1A signal current rating, and 1500 cycle durability. Ideal for telecom/datacom applications with right angle mounting option and solder termination.
NE8FDV
Neutrik Ag
NE8FDV by Neutrik Ag is a Telecom & Datacom Connector with 8 contacts, made of Glass Filled Polybutylene Terephthalate-Polyester. It has a temperature range of -30 to 80°C, nickel shell finish, and UL Flammability Code of 94V-0. Ideal for board and panel mounting in telecom and datacom applications.
MUSB-A511-004
Amphenol
MUSB-A511-004 by Amphenol is a USB connector with a body length of 1.181", body width of 0.709", and body depth of 0.637". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1000000000 ohm, and dielectric withstand voltage of 500VAC.
43202-8919
Molex 43202-8919 is a telecom & datacom connector with 0.624" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its durability, UL certification, and female contact gender. Operating temperature range from -40°C to 70°C makes it suitable for commercial use.
43860-0014
Molex 43860-0014 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. Insulation resistance of 500M ohm, operating temp range -40 to 85°C. Ideal for board mounting with UL-rated 6 contacts, solder termination, and nickel-plated shell for commercial applications.
RJHSE-5080-A2
J3011G21DNLT
Pulse Electronics
10117836-002LF
AMPHENOL ICC
Amphenol Icc's 10117836-002LF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a durable shell material, solder termination type, and operates b/w -55 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
85508-5001
Molex 85508-5001 is a Telecom & Datacom Connector with 0.654" body length, 500000000 ohm insulation resistance, and matte tin over nickel termination. Ideal for board mounting applications in telecom and datacom systems, featuring glass-filled liquid crystal polymer insulator material and staggered PCB contact pattern.
85505-5113
Molex 85505-5113 is a telecom & datacom connector with body dimensions of 0.653" x 0.512" x 0.74". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and phosphor bronze contact material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
85502-5007
Molex 85502-5007 is a Telecom & Datacom Connector with LCP insulator, matte tin finish, and brass contacts. It has 6 female contacts, operates b/w -40 to 85°C, and mounts on PCBs using solder posts. Ideal for commercial telecom applications requiring right-angle mounting and surface mount termination.
85502-5008
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; Reference Standard: UL;
85507-5001
The Molex 85507-5001 is a telecom & datacom connector with glass-filled liquid crystal polymer insulator. Featuring matte tin over nickel termination, it has a max operating temp of 80°C and -40°C min. With UL 94V-0 flammability rating, this female connector has 8 contacts and is suitable for commercial applications.
85502-5006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body or Shell Style: JACK;
85502-5009
The Molex 85502-5009 is a telecom & datacom connector with 0.44" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with surface mount termination.
85503-5001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Mounting Type: BOARD;
85502-5011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; UL Flammability Code: 94V-0; DIN Conformance: NO;
85504-5001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Filter Feature: NO; Termination Contact Finish: Tin (Sn);
85505-5002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; Minimum Operating Temperature: -40 Cel;
85507-5002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Body or Shell Style: JACK;
85502-0005
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mating Contact Finish: NOT SPECIFIED;
85502-0006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 500 Cycles;
85502-0007
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Plating Thickness (inch): 50u;
85502-0008
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm;
85502-0009
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Termination Contact Finish: TIN OVER NICKEL;
85502-0010
85502-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Filter Feature: NO;
85502-0012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Option-1: LOCKING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved