Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's MRJ-5381-012 is a Telecom & Datacom Connector with 500MΩ Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination Contact Finish. Ideal for telecom applications, this connector features POLYETHYLENE insulator material and PHOSPHOR BRONZE contact material in a RECEPTACLE shell style.
Median Price
$11.013
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Ampacity Inc.
$0.500
Semicontronic
$8.500
$8.288
$8.245
Gateway Technologies
$9.801
Netroflash
$10.792
Continental Prestige Electronics
Singapore Electronics
$12.114
$11.266
$10.781
$10.296
AZTECH Wire
$14.303
Argo Parts USA
Corohmni
High insulation resistance ensures reliable and stable signal transmission, reducing the risk of interference or signal loss.
Withstands high voltage levels, making it suitable for use in telecom and datacom applications where voltage fluctuations may occur.
Gold over nickel finish provides excellent conductivity and corrosion resistance, ensuring long-lasting performance.
Polyethylene insulator material offers good electrical insulation properties and durability, enhancing the reliability of the connector.
Nickel shell finish provides protection against corrosion and wear, extending the lifespan of the connector.
Having 2 PCB rows allows for more contacts to be accommodated, making the connector suitable for applications requiring multiple connections.
Specifically designed for telecom and datacom applications, ensuring compatibility and optimal performance in these environments.
Phosphor bronze contact material offers excellent conductivity and durability, maintaining signal integrity over time.
UL 94V-0 flammability rating indicates high fire resistance, making it a safe choice for applications where fire safety is a concern.
Combination of gold and nickel plating on mating contacts ensures reliable mating and disconnection, enhancing the overall performance of the connector.
Polarized housing ensures proper alignment during connection, reducing the risk of improper mating and potential signal disruption.
With a rated current of 1.5 A, this connector can handle the typical current levels found in telecom and datacom applications.
Having 8 contacts allows for multiple signal connections, making this connector suitable for applications with complex signaling requirements.
Versatile mounting options allow for easy installation on both PCBs and panels, providing flexibility in application design.
Zinc alloy shell material offers a balance of strength and lightweight design, ensuring durability without adding excessive weight to the overall connector.
Staggered PCB contact pattern allows for efficient use of space and facilitates proper alignment during installation, improving overall reliability.
Solder termination provides a secure and reliable connection, ensuring stable signal transmission and reducing the risk of connection failure.
Female contacts are commonly used in telecom and datacom connectors, offering compatibility with a wide range of mating connectors.
Receptacle style allows for easy mating and disconnection of connectors, enhancing usability in telecom and datacom systems.
Right angle mounting style saves space and provides a more compact installation option, ideal for applications with limited space constraints.
Telcom modular contact style offers versatility and compatibility with various communication standards, making it suitable for a wide range of applications.
Locking mounting option ensures secure and stable installation, preventing accidental disconnection and maintaining signal integrity.
Rectangular contact pattern allows for efficient use of space and provides a stable connection, reducing the risk of signal interference.
Telecom & Datacom Connectors MRJ-5381-012 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
MRJ-5381-012 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Continental Device India
Telefunken Microelectronics
09454521925
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1-292303-1
TE Connectivity
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
20825010001
20825010001 connector by Harting Electronics & Kg is a telecom and datacom connector with insulation resistance of 500MΩ, dielectric voltage withstand of 1000VDC, and operating temperature range from -40°C to 85°C. It is suitable for applications requiring reliable signal transmission in telecommunications and data communication systems.
UJ31-CH-G-SMT-TR-67
Cui Devices
UJ31-CH-G-SMT-TR-67 by CUI Devices is a Telecom & Datacom Connector with 24 contacts, POLYAMIDE10T insulator, and 100VAC dielectric voltage. It features a 0.386" body length, 0.167" width, and 0.384" depth. Ideal for telecom/datacom applications requiring high insulation resistance and durability in temperatures ranging from -25 to 85°C.
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
MUSBR-M1C1-M0
Amphenol Communications Solutions
The Amphenol MUSBR-M1C1-M0 USB connector features 24 contacts, rated at 5A signal current. With a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it is ideal for telecom applications. Its compact dimensions (0.925" x 0.346" x 0.491") make it suitable for board and panel mounting in various datacom setups.
UE86-3G2420-60361
Amphenol
Amphenol UE86-3G2420-60361 is a Telecom & Datacom Connector with 40+40 contacts, Liquid Crystal Polymer insulator, and Matte Tin finish. It has a right-angle mounting style for board installation and operates b/w -40°C to 85°C. Ideal for telecom and datacom applications requiring high-density connections.
692121030100
Wuerth Elektronik & Kg
692121030100 by Wurth Elektronik is a USB connector with 9 contacts, rated at 1.8A signal current. It features liquid crystal polymer insulation, matte tin finish, and operates b/w -20 to 85°C. Ideal for telecom & datacom applications requiring durable board mounting connectors with staggered PCB contact pattern.
1932055-1
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
85513-5113
Molex
The Molex 85513-5113 is a telecom and datacom connector with 8 contacts. It features a surface mount termination and a polyethylene insulator material. This jack-style connector is commonly used in board-mounted applications.
RJHSE-538A
Amphenol RJHSE-538A is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and PHOSPHOR BRONZE contact material. It has a 0.65" x 0.53" x 0.62" body size, operates b/w -55°C to 85°C, and features SOLDER termination. Ideal for board and panel mounting in commercial applications.
MRJR-5384-B1
Amphenol MRJR-5384-B1 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. Featuring a zinc alloy shell, it has a body size of 1.193" x 0.709" x 1.115". Ideal for board mounting with solder termination, this UL-rated connector operates b/w -40°C to +105°C.
RJE72-188-1411
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2301994-7
TE Connectivity 2301994-7 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, board lock mounting option, and brass shell material. Ideal for telecom applications due to its right angle mounting style and female contact gender.
5749621-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 5749621; JESD-609 Code: e3; Shell Finish: TIN/NICKEL;
2086588131
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
M701-330442
Harwin Plc
The Harwin PLC M701-330442 USB connector features 4 contacts, with a 1.5A signal rating and 30mohm contact resistance. With a body length of 0.474", it is ideal for telecom/datacom applications, offering durability up to 1500 cycles and operating temperatures from -55°C to 85°C.
6116075-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; IEC Conformity: NO;
HDRA-EC68LFDT2+
Honda Tsushin Kogyo
HDRA-EC68LFDT2+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with polyamide insulator, nickel shell finish, and steel shell material. It features right-angle mounting for board/panel use and female contact gender with solder termination. Ideal for high-density data transmission applications.
6-641337-3
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mixed Contacts: NO; IEC Conformity: NO; DIN Conformance: NO; Body or Shell Style: PLUG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MRJ-5381-M1
Amphenol MRJ-5381-M1 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features gold over nickel mating contact finish, polyethylene insulator material, and staggered PCB contact pattern. Ideal for commercial applications requiring durable connectors with high insulation resistance and wide operating temperature range from -40 to 105°C.
MRJ-5381-01
Amphenol MRJ-5381-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a right-angle mounting style, POLYETHYLENE insulator, and operates b/w -40 to 105°C. Ideal for telecom and datacom applications due to its durability of 2500 cycles and UL flammability rating of 94V-0.
MRJ-5381-013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (50) OVER NICKEL (50);
MRJ-5384-M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Rated Current - Signal: 1.5 A;
MRJ-5480-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 30 mohm; No. of Ports: 1;
MRJ-5780-01
Amphenol MRJ-5780-01 is a Telecom & Datacom Connector with 8 contacts. It features Matte Tin finish, Polyethylene insulator, and Zinc Alloy shell. Ideal for board mounting applications in telecom and datacom systems due to its right angle receptacle design and gold over nickel mating contact finish.
MRJ-5385-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 30 mohm; Body Depth: 1.061 inch;
MRJ-5380-01
Amphenol MRJ-5380-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a body length of 1.193", width of 0.709", and depth of 1.061". Ideal for applications requiring durability, reliability, and operating temperatures ranging from -40 to 105°C.
MRJ-5481-01
Amphenol's MRJ-5481-01 is a telecom and datacom connector with insulation resistance of 500MΩ, dielectric voltage of 1500VAC, and gold over nickel termination. It is used for board and panel mounting in applications requiring reliable signal transmission.
MRJ-5485-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Rated Current - Signal: 1.5 A; Polarization Key: POLARIZED HOUSING;
MRJ-5184-PF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL;
MRJ-5780-M1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Empty Shell: NO; Contact Style: TELCOM, MODULAR;
MRJ-5381-014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; PCB Contact Pattern: STAGGERED; Polarization Key: POLARIZED HOUSING;
MRJ-5381-B12
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Empty Shell: NO; Mixed Contacts: NO;
MRJ-5381-B13
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Termination Contact Finish: GOLD OVER NICKEL; Total No. of Contacts: 8;
MRJ-5381-BB2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Contact Material: PHOSPHOR BRONZE; Total No. of Contacts: 8;
MRJ-5381-BN8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Mating Contact Finish: GOLD (50) OVER NICKEL (50); DIN Conformance: NO;
MRJ-5381-MN9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; DIN Conformance: NO; Mating Contact Finish: GOLD (50) OVER NICKEL (50);
MRJ-5381-P11
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; Mixed Contacts: NO; IEC Conformity: NO;
MRJ-5381-P14
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500 VAC; JESD-609 Code: e4; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved