Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 95503-6891 is a Telecom & Datacom Connector with Insulation Resistance of 500MΩ, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and SPLIT BOARD LOCK mounting option. Ideal for telecom applications due to UL Flammability Code 94V-0, rated current of 1.5A, and total of 8 contacts for commercial reliability.
Median Price
$0.820
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$0.695
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.810
$0.780
$0.760
Distrelec
$1.126
$0.858
$0.697
Mouser Electronics
$1.390
$1.050
$0.869
$0.754
DigiKey
$1.460
Adafruit Industries
$155.952
$141.916
$127.881
TTI
$0.639
$0.527
$0.477
Newark
$1.140
$1.030
Chip1Stop
$0.636
$0.620
Powell Electronics
$0.730
$0.710
Master Electronics
$0.828
$0.749
Farnell
$0.532
TTI Europe
$0.535
Interstate Connecting
$0.813
$0.681
$0.643
RS (Exports)
$0.939
$0.825
Element14
$1.410
$1.230
$1.130
Digiode
$0.660
Nova Conductors
$0.693
TME
$1.070
$0.800
$0.720
$0.700
Vyrian
IBS Electronics
$0.884
$0.842
Bristol Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Inventory MP
Halfin
LIBRA Elektronik GmbH
VNN
Corphita
$0.626
Aranea Global
$0.679
$0.652
Argo Parts USA
$0.672
Advanced Electronics
$0.717
Continental Prestige Electronics
$0.794
$0.522
$0.497
Semicontronic
$0.990
$0.965
$0.960
Aztec Data Supply Inc.
$8.388
Andel Nordic
$26.140
$18.300
Perfect Parts
High insulation resistance ensures reliable signal transmission and prevents leakage of current, making the connector suitable for telecom and datacom applications.
The use of glass-filled liquid crystal polymer as the insulator material provides excellent mechanical strength and thermal stability, enhancing the durability of the connector.
With a high maximum operating temperature of 85°C, this connector can withstand demanding environmental conditions in telecom and datacom systems.
The connector can operate effectively in low-temperature environments down to -40°C, ensuring reliable performance even in harsh climates.
Specifically designed for telecom and datacom applications, this connector offers compatibility with a wide range of equipment in these industries.
UL 94V-0 flammability rating indicates that the connector meets strict safety standards and is resistant to catching fire, making it suitable for use in telecommunications equipment.
The connector can handle a rated signal current of 1.5 A, ensuring efficient transmission of data signals without incurring damage or overheating.
The black insulator color provides a sleek and professional appearance to the connector, making it visually appealing when integrated into telecom and datacom systems.
Compliance with UL standards ensures that the connector has undergone rigorous testing for safety and reliability, giving users peace of mind when using it in their equipment.
With 8 contacts, this connector offers ample connectivity options for various telecommunications and data communication applications, allowing for versatile configurations.
The board mounting type provides a secure and stable connection to the PCB, ensuring that the connector remains firmly in place during operation, reducing the risk of signal interruptions.
Surface mount termination simplifies the installation process and allows for easy integration into PCB designs, saving time and effort during assembly.
Low contact resistance of 20 mohm minimizes signal loss and ensures efficient data transmission, making the connector a reliable choice for high-speed telecom and datacom applications.
The straight mounting style offers a simple and straightforward installation process, allowing for easy connection and disconnection of the connector when needed.
Commercial-grade reliability ensures that the connector is designed to meet industry standards for performance and durability, making it a dependable choice for telecom and datacom installations.
Telecom & Datacom Connectors 95503-6891 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
95503-6891 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Sourcing 18/Nov/2021 Mult Devs Drawing Update 18/Feb/2022
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
American Power Devices
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Rfe International
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Itt Semiconductor
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
09455511103
Harting Electronics & Kg
09455511103 by Harting Electronics & Kg is a Telecom & Datacom Connector with insulator made of plastic. It has 8 contacts, rated at 1.5A signal current, and operates b/w -40 to 70°C. Ideal for commercial applications, this connector offers durability of 750 cycles and features a straight mounting style with solder termination.
1-1734346-1
TE Connectivity
TE Connectivity 1-1734346-1 is a USB connector with POLYETHYLENE insulator, rated for 1A signal current. It has a right angle mounting style and surface mount termination, suitable for telecom & datacom applications. Operating temperature range is 0-50°C with UL flammability rating of 94V-0.
7499011212A
Wuerth Elektronik & Kg
7499011212A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy shell material, and Solder termination type. Ideal for board mounting in applications requiring right angle mounting style.
09454521924
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
2171770001
Molex
TELECOM AND DATACOM CONNECTOR;
7499011222A
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL;
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
J00-0065NL
Pulse Electronics
J00-0065NL by Pulse Electronics is a telecom & datacom connector with body dimensions of 0.64" x 0.545" x 0.85". It features matte tin termination, polyethylene insulator, and brass shell material. Ideal for board and panel mounting applications, it has 8 contacts, UL 94V-0 flammability rating, and operates b/w 0°C to 70°C.
215875-1
TE Connectivity 215875-1 is a Telecom & Datacom Connector with 0.441" body length, 0.453" width, and insulator resistance of 500M ohm. It features glass-filled polybutylene terephthalate material and solder holding posts for board mounting. Ideal for telecom applications with UL-rated signal current of 1.5A and female contact gender.
46765-2301
Molex 46765-2301 is a Telecom & Datacom Connector with 0.256" body length, 10000000 ohm insulation resistance, and 200VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems due to its GLASS FILLED LIQUID CRYSTAL POLYMER insulator material, GOLD NICKEL termination finish, and POLARIZED HOUSING polarization key.
10117836-001LF
AMPHENOL ICC
Amphenol Icc's 10117836-001LF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a solder holding flange for board mounting, UL94V-0 flammability rating, and durability up to 3500 cycles.
5558342-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Board Mounting Option: PEG; Shell Material: COPPER ALLOY; Insulator Material: POLYAMIDE;
10118192-0001LF
Amphenol Communications Solutions
Amphenol's 10118192-0001LF USB connector features gold over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. Ideal for telecom/datacom applications, with 100VAC dielectric voltage, 5 contacts, and 80°C max operating temp. Perfect for board mounting with right-angle style and surface mount termination.
HFJ11-1G01E-L12RL
Halo Electronics
HFJ11-1G01E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a 0.625" body length, 0.537" width, and 0.85" depth. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and solder termination type.
47589-1001
The Molex 47589-1001 is a USB connector with 5 contacts and a surface mount termination type. It has an insulation resistance of 1GΩ, dielectric withstand voltage of 100VAC, and can operate in temperatures ranging from -30°C to 85°C. This connector is commonly used in telecom and datacom applications due to its durability (10k cycles) and commercial reliability.
47589-0001
47589-0001 by Molex is a USB connector with gold/nickel termination, LCP insulator, and brass contacts. It has 5 contacts, operates b/w -20 to 85°C, and offers 10000 cycle durability. Ideal for telecom/datacom applications requiring surface mount cable mounting in right angle receptacle style.
61729-0011BLF
Amphenol Communications Solutions' 61729-0011BLF is a USB connector with a body length of 0.48 inch, width of 0.433 inch, and depth of 0.63 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 750VAC. This connector is commonly used in telecom and datacom applications for board mounting with split board lock option.
5788336-1
TE Connectivity USB Connector 5788336-1 with 0.474" body length, 0.451" width, and 0.615" depth. Insulation resistance of 1000000000 ohm, operating temperature range from -55 to 85 °C. Ideal for telecom/datacom applications with solderable retention clips for board mounting.
43860-0019
Molex 43860-0019 Telecom & Datacom Connector features Insulation Resistance of 500MΩ, Rated Current - Signal of 1.5A, and Contact Resistance of 20mΩ. Ideal for board mounting in telecom and datacom applications with UL Flammability Code 94V-0.
PCR-E96LMD
Honda Tsushin Kogyo
PCR-E96LMD by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with glass-filled polybutylene terephthalate insulator, copper/nickel shell finish, and zinc alloy shell material. It features solder termination, right-angle mounting style for board/panel use, and UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
95501-2661
Molex 95501-2661 is a telecom & datacom connector with body dimensions of 0.52" x 0.453" x 0.713". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
95503-2881
Molex 95503-2881 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.594" body width. It features GLASS FILLED LCP insulator material and MATTE TIN over NICKEL termination contact finish. Ideal for telecom and datacom applications due to its durability, UL certification, and solder termination type.
95503-2661
Molex 95503-2661 is a Telecom & Datacom Connector with 0.52" body length, 0.594" width, and 0.618" depth. It features 500000000 ohm insulation resistance, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom and datacom applications due to its durability of 750 cycles, UL flammability rating of 94V-0, and operating temperature range from -40°C to 80°C.
95501-6889
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mounting Option-1: LOCKING;
95501-2881
The Molex 95501-2881 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.713" depth. It features a glass-filled liquid crystal polymer insulator, TIN contact finish, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with a rated current of 1.5A and operating temperature range from -40°C to 85°C.
95501-2441
Molex 95501-2441 is a telecom & datacom connector with 0.44" body length, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 500000000 ohm insulation resistance. Ideal for board mounting in applications requiring a right angle jack style connector with 4 contacts and solder termination.
95501-6669
The Molex 95501-6669 is a telecom and datacom connector with a body length of 0.52", width of 0.453", and depth of 0.809". It has an insulation resistance of 500MΩ, termination contact finish of TIN, and is made with glass-filled liquid crystal polymer. This connector is commonly used in telecommunications and data communication applications.
95503-2884
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; IEC Conformity: NO;
95503-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Filter Feature: NO; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER;
95501-6449
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Insulation Resistance: 500000000 ohm;
95501-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 20 mohm; MIL Conformity: NO;
95503-2441
The Molex 95503-2441 is a telecom and datacom connector with a body length of 0.44", width of 0.594", and depth of 0.618". It has a max operating temperature of 80°C and min operating temperature of -40°C. This connector is commonly used in commercial applications, offering durability with 750 cycles.
95501-2882
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; UL Flammability Code: 94V-0;
95501-2611
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): 20.016; No. of Ports: 1;
95501-6890
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulation Resistance: 500000000 ohm; Board Mounting Option: SPLIT BOARD LOCK;
95501-7661
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: .713 inch; Mating Contact Finish: NOT SPECIFIED;
95503-6671
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Termination Type: SURFACE MOUNT;
95503-6651
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): 19.5712; Filter Feature: NO;
95503-6887
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Total No. of Contacts: 8;
95503-6894
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved