Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse SS-7188S-A-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting with staggered PCB contact pattern at 2.54mm pitch for right-angle mounting applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Advanced Electronics
$2.282
$2.168
Ampacity Inc.
$3.500
Aztec Data Supply Inc.
$10.030
AZTECH Wire
$11.100
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Compact size of the body allows for efficient use of space in telecom and datacom applications.
Polyethylene provides excellent insulation properties, ensuring reliable and safe signal transmission.
The plating thickness of 30u offers good conductivity and corrosion resistance, enhancing the durability of the connector.
Having 2 PCB rows allows for more connections to be made, increasing the versatility of the connector.
Specifically designed for telecom and datacom applications, ensuring compatibility and performance in these specific use cases.
Polarized housing helps in proper alignment and connection of the connector, reducing the chances of errors during installation.
Right angle mounting style allows for easy installation and space-saving orientation of the connector on the board.
Copper alloy shell provides good conductivity and mechanical strength, ensuring stable and reliable connections.
Standard terminal pitch of 2.54mm allows for compatibility with a wide range of other connectors and PCB layouts.
Commercial grade reliability ensures consistent performance and durability in standard operating conditions.
Telecom & Datacom Connectors SS-7188S-A-NF-K1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
SS-7188S-A-NF-K1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Connectors Labeling/Logo 10/Dec/2014
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Silicon Standard
Daco Semiconductor
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
USB-A-S-RA-TSMT-NP
Adam Tech
USB-A-S-RA-TSMT-NP by Adam Tech is a USB connector with 4 contacts, rated at 1.5A signal current. It features right-angle mounting style with a 0.571" body length and 0.28" width. Ideal for telecom & datacom applications, it has a dielectric voltage of 500VAC and operates b/w -20 to 60°C.
DX07S024WJ3R400
Japan Aviation Electronics Industry
DX07S024WJ3R400 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. Features gold over nickel termination, polyethylene insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring surface mount board mounting of female connectors.
MRJ-5384-M1
Amphenol
Amphenol MRJ-5384-M1 is a telecom & datacom connector with gold-plated contacts, 500M ohm insulation resistance, and 105°C max operating temp. Ideal for board mounting in commercial applications requiring durable female connectors with staggered PCB contact pattern.
6339160-1
TE Connectivity
TE Connectivity 6339160-1 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, rated at 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring high insulation resistance of 500MOhm.
DCP-USBNB-MNSC
Switchcraft
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
RJE3A-188-1341
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
MP1010RX-1000S
Kycon
The Kycon MP1010RX-1000S is a telecom & datacom connector with 1010 contacts, gold flash finish, and copper alloy material. It has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C. Ideal for commercial applications requiring reliable wire termination in round cable setups.
48037-2200
Molex
The Molex 48037-2200 USB connector features gold termination, glass-filled polyamide46 insulator, and brass contact material. Ideal for telecom & datacom applications, it offers a rated current of 1.5A, durability of 1500 cycles, and operates b/w -20 to 85°C.
1932391-2
TE Connectivity's 1932391-2 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and nickel-plated brass shell. It has 8 contacts, rated at 1.5A signal current, UL94V-0 flammability code, and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecom/datacom applications.
RJHSE-5E80
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: GOLD OVER NICKEL (50); JESD-609 Code: e3; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE;
5788336-1
TE Connectivity USB Connector 5788336-1 with 0.474" body length, 0.451" width, and 0.615" depth. Insulation resistance of 1000000000 ohm, operating temperature range from -55 to 85 °C. Ideal for telecom/datacom applications with solderable retention clips for board mounting.
87583-2010BLF
87583-2010BLF by Amphenol is a Telecom & Datacom Connector with 4 contacts, Tin finish with Nickel barrier, and Polyethylene insulator. It is a surface mount receptacle connector suitable for board mounting in telecom and datacom applications.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
67643-2910
Molex 67643-2910 USB connector features 4 contacts, with insulation resistance of 1Gohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a solderable board mounting option and operates b/w -40 to 85°C.
10120052001
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
ZX62RD-AB-5P8(30)
Hirose Electric
ZX62RD-AB-5P8(30) by Hirose Electric is a USB connector with 5 gold contacts, liquid crystal polymer insulator, and stainless steel shell. It is used in telecom/datacom applications for surface mount on boards/panels due to its UL 94V-0 flammability rating and right-angle mounting style.
46765-1001
Molex 46765-1001 is a Telecom & Datacom Connector with 0.256" body length, 200VAC dielectric voltage, and GOLD termination. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it operates b/w -30 to 85°C. This male connector offers 19 contacts in a right-angle receptacle design for commercial applications.
HFJ11-E1G41E-L12RL
Halo Electronics
HFJ11-E1G41E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 8 contacts. Features gold finish, 0.625" body length, 0.537" width, and 0.85" depth. Ideal for board and panel mounting in telecom and datacom applications.
43860-0014
Molex 43860-0014 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. Insulation resistance of 500M ohm, operating temp range -40 to 85°C. Ideal for board mounting with UL-rated 6 contacts, solder termination, and nickel-plated shell for commercial applications.
JXD0-4015NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS-7188S-A-NF-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
SS-7188S-A-NF
Bel Fuse SS-7188S-A-NF is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. Featuring 8 contacts in a JACK body style, it offers RIGHT ANGLE mounting option for SOLDER termination. Ideal for commercial applications requiring UL-certified connectors with POLARIZED housing and LOCKING board mounting.
SS-7188S-A-NF-K1-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Contact Style: TELCOM, MODULAR;
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
SS-7188S-A-NF-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Mating Contact Finish: GOLD (30);
SS-7188VS-A-FLS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; Total No. of Contacts: 8;
SS71800-027F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Polarization Key: POLARIZED HOUSING; Mating Contact Finish: NOT SPECIFIED;
SS-7188S-A-PG4-1-BA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Termination Contact Finish: NOT APPLICABLE;
SS71800-007F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; UL Flammability Code: 94V-0;
SS-7188S-A-FLS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .55 inch; Total No. of Contacts: 8;
SS-7188S-A-PG4-1-BA-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; Plating Thickness (inch): 50u;
SS-7188S-A-PG3-1-BA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; No. of PCB Rows: 2; Body Length: .708 inch;
SS-7188S-A-NF-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of PCB Rows: 2; Body or Shell Style: JACK; Filter Feature: NO;
SS-7188S-A-PG4-BA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 8; Mixed Contacts: NO;
SS-7188S-A-NF-1-01-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .635 inch; Contact Pattern: RECTANGULAR; PCB Contact Row Spacing (mm): 2.54;
SS-7188S-A-NF-1-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Body Depth: .85 inch; MIL Conformity: NO;
SS-7188S-A-NF-1-02-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Row Spacing (mm): 2.54; Body Length: .635 inch; Total No. of Contacts: 8;
SS-7188S-A-NF-1-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; No. of Rows Loaded: 1; Polarization Key: POLARIZED HOUSING;
SS-7188S-A-FLS-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-2: GROUNDING TAB; Body Length: .72 inch;
SS-7188S-A-PGI-BA-50-A403
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Additional Features: PANEL MOUNTABLE, EMI SHIELDED; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved