Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 95501-2882 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.453" body width. Ideal for board mounting applications in telecom and datacom systems, featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and NICKEL shell finish.
Median Price
$0.922
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$0.723
100+ parts
$0.439
1k+ parts
$0.420
10k+ parts
-
DigiKey
$1.260
Mouser Electronics
$1.390
$1.080
$0.905
$0.746
Element14
$1.491
$0.969
$0.820
Verical
$0.434
Powell Electronics
$0.640
$0.610
TTI Europe
$0.506
Newark
$1.120
$0.963
Digiode
$0.732
IBS Electronics
$0.637
$0.537
TME
$0.604
$0.510
Vyrian
NAC Semi
$0.925
$0.854
VNN
Nova Conductors
Corphita
$0.693
Advanced Electronics
$5.291
$4.815
$4.339
Aztec Data Supply Inc.
$8.291
GreenTree Electronics
Glotronic Ltd.
Metaverse IC Inc.
Continental Prestige Electronics
Abacus Technologies
Kepictronics
Perfect Parts
Argo Parts USA
Bastille Electronics
Eastek
Compact size allows for efficient use of space in telecom and datacom applications.
High insulation resistance ensures reliable performance and minimizes signal interference.
Slim width enables installation in tight spaces and dense electronic layouts.
Adequate depth ensures secure connection and stability in the mounting platform.
Durable material provides strength and resistance to environmental factors.
Secure mounting option ensures stability and reliability in various operating conditions.
Wide temperature range allows for use in different environmental settings.
Reliable performance in extreme cold temperatures.
Nickel finish provides corrosion resistance and enhances durability.
Specifically designed for telecom and datacom applications, ensuring compatibility and reliable connections.
High flammability rating enhances safety and compliance with industry standards.
Suitable for transmitting signals with relatively high current requirements.
Black color for easy identification and aesthetic appeal in equipment.
Compliance with UL standards ensures quality and safety of the product.
Sufficient number of contacts for data transmission and communication purposes.
Board mounting provides stable and secure installation in electronic devices.
Standard terminal pitch for compatibility with a wide range of devices and applications.
Staggered contact pattern enhances signal transmission efficiency and reduces crosstalk.
Solder termination for reliable and durable electrical connections.
Female contact gender for compatibility with male connectors and devices.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Jack style for easy insertion and removal of connectors in equipment.
Right angle mounting style for flexible and space-saving installation options.
Modular contact style for easy assembly and customization of configurations.
Locking mounting option ensures secure connection and prevents accidental disconnection.
Commercial-grade reliability for consistent performance in various commercial applications.
Telecom & Datacom Connectors 95501-2882 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
95501-2882 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Sourcing 18/Nov/2021 Mult Devs Drawing Update 18/Feb/2022
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
PCN Packaging - Mult Devs Cancel Packaging Change 28/Dec/2023 Mult Devs Packaging 14/Sep/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Secos
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Hy Electronic
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
GSB4111312HR
Amphenol Communications Solutions
GSB4111312HR by Amphenol Communications Solutions is a USB connector with 9 contacts. It features a polyethylene insulator and a nickel shell finish. This right angle mounting style connector is commonly used in telecom and datacom applications.
2500.0010.0
Molex
TELECOM AND DATACOM CONNECTOR;
95522-2887
Molex 95522-2887 is a Telecom & Datacom Connector with 0.708" body length, 0.655" width, and 0.64" depth. It features insulation resistance of 500M ohm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom/datacom applications due to UL reference standard compliance, male contact gender, and solder termination type.
5-2337992-8
TE Connectivity 5-2337992-8 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and solder termination for telecom applications.
RJE1R-288-236401
RJHSE-5380-A8
1-406541-5
TE Connectivity 1-406541-5 is a Telecom & Datacom Connector with EMI shielding. It features Matte Tin finish, Polyethylene insulator, and Phosphor Bronze contacts. Ideal for telecom applications, it has 8 contacts, operates b/w -40 to 85°C, and offers durability of 750 cycles.
5557969-1
TE Connectivity 5557969-1 is a Telecom & Datacom Connector with EMI shielding. It features 0.715" body length, 0.66" width, and 0.658" depth. Ideal for telecom applications due to its UL-rated durability and polarization key for polarized housing.
EHRJ45P5ESIDC
Switchcraft
48037-2200
The Molex 48037-2200 USB connector features gold termination, glass-filled polyamide46 insulator, and brass contact material. Ideal for telecom & datacom applications, it offers a rated current of 1.5A, durability of 1500 cycles, and operates b/w -20 to 85°C.
5406721-1
TE Connectivity 5406721-1 is a Telecom & Datacom Connector with 0.669" body length, 0.488" width, and Matte Tin finish. It features POLYETHYLENE insulator, POLYPHENYLENE SULFIDE shell material, and 8 contacts for board mounting applications.
61729-0011BLF
Amphenol Communications Solutions' 61729-0011BLF is a USB connector with a body length of 0.48 inch, width of 0.433 inch, and depth of 0.63 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 750VAC. This connector is commonly used in telecom and datacom applications for board mounting with split board lock option.
1734577-4
TE Connectivity 1734577-4 is a Telecom & Datacom Connector with EMI shielding, gold flash termination, and glass-filled polyamide46 insulator. It has 8 contacts, rated for 1A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durability and reliability in commercial settings.
1-292303-1
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
6339160-1
TE Connectivity 6339160-1 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, rated at 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring high insulation resistance of 500MOhm.
95501-6669
The Molex 95501-6669 is a telecom and datacom connector with a body length of 0.52", width of 0.453", and depth of 0.809". It has an insulation resistance of 500MΩ, termination contact finish of TIN, and is made with glass-filled liquid crystal polymer. This connector is commonly used in telecommunications and data communication applications.
JXD0-0019NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
65100516121
Wuerth Elektronik & Kg
65100516121 USB connector by Wurth Elektronik features a body length of 0.378", insulation resistance of 1Gohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a gold finish, liquid crystal polymer insulator, and operates b/w -40 to 105°C.
ARJE-0025
Abracon
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
6-555174-2
Commscope
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
95501-2661
Molex 95501-2661 is a telecom & datacom connector with body dimensions of 0.52" x 0.453" x 0.713". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
95503-2881
Molex 95503-2881 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.594" body width. It features GLASS FILLED LCP insulator material and MATTE TIN over NICKEL termination contact finish. Ideal for telecom and datacom applications due to its durability, UL certification, and solder termination type.
95503-2661
Molex 95503-2661 is a Telecom & Datacom Connector with 0.52" body length, 0.594" width, and 0.618" depth. It features 500000000 ohm insulation resistance, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom and datacom applications due to its durability of 750 cycles, UL flammability rating of 94V-0, and operating temperature range from -40°C to 80°C.
95501-6889
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mounting Option-1: LOCKING;
95501-2881
The Molex 95501-2881 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.713" depth. It features a glass-filled liquid crystal polymer insulator, TIN contact finish, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with a rated current of 1.5A and operating temperature range from -40°C to 85°C.
95503-6891
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Contact Resistance: 20 mohm;
95501-2441
Molex 95501-2441 is a telecom & datacom connector with 0.44" body length, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 500000000 ohm insulation resistance. Ideal for board mounting in applications requiring a right angle jack style connector with 4 contacts and solder termination.
95503-2884
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; IEC Conformity: NO;
95503-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Filter Feature: NO; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER;
95501-6449
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Insulation Resistance: 500000000 ohm;
95501-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 20 mohm; MIL Conformity: NO;
95503-2441
The Molex 95503-2441 is a telecom and datacom connector with a body length of 0.44", width of 0.594", and depth of 0.618". It has a max operating temperature of 80°C and min operating temperature of -40°C. This connector is commonly used in commercial applications, offering durability with 750 cycles.
95501-2611
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): 20.016; No. of Ports: 1;
95501-6890
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulation Resistance: 500000000 ohm; Board Mounting Option: SPLIT BOARD LOCK;
95501-7661
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: .713 inch; Mating Contact Finish: NOT SPECIFIED;
95501-7881
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 2.54;
95501-2401
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Reference Standard: UL;
95501-2601
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; Empty Shell: NO;
95501-2821
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved