Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 95501-6449 is a Telecom & Datacom Connector with 0.44" body length, 0.453" body width, and 0.809" body depth. It features insulation resistance of 500MΩ and termination contact finish of Matte Tin over Nickel. Ideal for board mounting applications in telecom and datacom systems, this connector operates b/w -40°C to 85°C with UL flammability rating of 94V-0.
Median Price
$0.770
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Arrow
1+ parts
$0.598
100+ parts
$0.525
1k+ parts
$0.477
10k+ parts
-
Interstate Connecting
$0.742
$0.605
DigiKey
$1.420
Mouser Electronics
$1.510
$1.030
$0.919
$0.785
Chip1Stop
$3.080
$0.741
$0.479
$0.475
Adafruit Industries
$166.050
$151.106
$136.161
TTI
$0.595
$0.567
Master Electronics
$0.765
$0.745
$0.632
Verical
$0.850
$0.820
$0.780
TTI Europe
$0.500
$0.459
Powell Electronics
$0.750
$0.720
RS (Exports)
$0.945
$0.891
Farnell
$0.559
$0.536
$0.513
Element14
RS Americas
$0.460
Newark
$1.270
$0.949
Distrelec
Digiode
$0.568
Nova Conductors
$0.684
TestEquity
$0.730
TME
$1.450
$0.920
$0.860
Rapid Electronics
$32.120
VNN
IBS Electronics
$0.959
$0.931
$0.775
Vyrian
NAC Semi
$1.080
$0.996
J2 Sourcing AB
Electronics Depot
Prism Electronics
Bristol Electronics
Sensible Micro Corp
LWI Electronics Inc
Semicontronic
$0.391
$0.381
$0.379
Corphita
$0.538
Aranea Global
$0.670
$0.644
Argo Parts USA
$0.664
Continental Prestige Electronics
$1.290
$0.738
$0.621
Andel Nordic
$19.490
$13.645
Perfect Parts
GreenTree Electronics
$0.688
Glotronic Ltd.
Abacus Technologies
Assy Fe
Kepictronics
Eastek
Authorized Procurement Solutions
Futuretech Components
Robosynatics
$3.500
$3.241
Compact body size allows for space-saving design and easy integration into various devices.
High insulation resistance ensures reliable signal transmission and prevents electrical short circuits.
Optimal width for secure connections while maintaining a compact form factor.
Matte tin over nickel finish provides excellent conductivity and corrosion resistance for long-term durability.
Sufficient depth for stable mounting and secure connection.
Durable and high-performance insulator material for reliable operation in diverse environments.
Split board lock mounting option for easy installation and secure attachment to circuit boards.
High maximum operating temperature allows for reliable performance in various temperature conditions.
Low minimum operating temperature ensures functionality even in extreme cold environments.
Specifically designed for telecom and datacom applications for seamless connectivity and signal transmission.
UL 94V-0 flammability rating for safe and fire-resistant operation.
High signal current rating allows for efficient transmission of signals without risk of overheating.
Black color for easy identification and aesthetic appeal in various devices and systems.
Compliance with UL standards ensures quality, safety, and reliability of the product.
Sufficient number of contacts for multiple signal connections in telecom and datacom applications.
Board mounting type for secure attachment to circuit boards and easy integration into devices.
Optimal terminal pitch for stable connections and compatibility with standard mounting configurations.
Rectangular PCB contact pattern for easy alignment and secure installation on circuit boards.
Surface mount termination type for easy and reliable connection to PCBs without the need for additional soldering.
Low withdrawal force for easy removal and maintenance of connectors without damaging the PCB.
Female contact gender for compatible mating with male connectors in telecom and datacom systems.
Low contact resistance for efficient signal transmission and minimal power loss.
Jack body or shell style for secure and reliable connection in various devices and applications.
Right angle mounting style for flexible installation and space-saving design in tight spaces.
Telcom, modular contact style for versatile connectivity and compatibility with standard telecom and datacom interfaces.
Optimal insertion force for secure mating and stable connections without risk of damage.
Locking mounting option for added security and prevention of accidental disconnection.
Designed for commercial applications with reliable performance and durability for long-term use.
Telecom & Datacom Connectors 95501-6449 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
95501-6449 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Sourcing 18/Nov/2021 Mult Devs Drawing Update 18/Feb/2022
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
RJSAE-5380-02
Amphenol
Amphenol RJSAE-5380-02 is a telecom & datacom connector with 2 ports, 8+8 contacts. Featuring POLYETHYLENE insulator, PHOSPHOR BRONZE contact material, and COPPER ALLOY shell material. Ideal for board mounting with right angle mounting style and solder termination.
VS-08-RJ45-5-Q/IP20BK
Phoenix Contact
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
5-554739-3
TE Connectivity
TE Connectivity 5-554739-3 is a Telecom & Datacom Connector with 0.464" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for wire, stranded, flat cables in telecom applications due to its male contact gender, crimp termination type, and 8 contacts.
PX0833/E
Bulgin
The Bulgin PX0833/E is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and UL 94V-0 flammability rating. It features polarized housing for secure connections and is ideal for panel mounting in telecom applications.
1-2201855-1
TE Connectivity 1-2201855-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, male gender, and insulation resistance of 500MΩ. Ideal for telecom and datacom applications due to its durability, polarization key feature, and copper alloy shell material.
USB3080-30-01-A
Global Connector Technology
USB3080-30-01-A by Global Connector Technology is a Micro USB B connector with 5 contacts, gold over nickel finish, and 30u plating thickness. It has a durability of 10k cycles and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it offers high insulation resistance of 1Gohm and dielectric voltage of 500VAC.
67803-8020
Molex
Molex 67803-8020 USB connector with 5 contacts, 0.39"x.157"x.354" dimensions, and GLASS FILLED POLYAMIDE insulator is ideal for telecom/datacom applications. Features include TIN termination finish, solder holding flange for board mounting, and 30u plating thickness. Operating temp range: 0-50°C.
292303-1
TE Connectivity's 292303-1 USB connector has a body length of 0.576", insulation resistance of 1000000000 ohm, and operates b/w -55 to 85 °C. Ideal for telecom/datacom applications, it features solderable retention clips for board mounting and a shell made of copper alloy.
RJHSE-3P80
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
56579-0519
Molex 56579-0519 is a USB connector with 5 contacts, 0.303" body length, and 0.156" body width. Ideal for telecom/datacom applications, it features GLASS FILLED POLYPHTALAMIDE insulation material and operates b/w -20 to 85°C. With UL certification and 1A signal current rating, it offers reliable performance in commercial settings.
10033526-N3212LF
10033526-N3212LF by Amphenol is a USB connector with 5 contacts, rated at 1A signal current. It features matte tin termination finish, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for telecom & datacom applications requiring a durable, right-angle board mounting option with a surface mount termination type.
HDR-E50MSG1+
Honda Tsushin Kogyo
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
RJ45-8N4-S
TE Connectivity's RJ45-8N4-S is a telecom & datacom connector with 8 contacts, 1000VAC dielectric voltage, and 50u plating thickness. It features a 0.7" x 0.515" x 0.74" body size, glass-filled polyester insulator, and solder termination. Ideal for board mounting applications in telecommunications and data communication systems.
74980111211
Wuerth Elektronik & Kg
74980111211 by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy Shell Material, and is UL 94V-0 rated. Ideal for board and panel mounting in telecom and datacom applications.
JXD0-4015NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
20825000002
Harting Electronics & Kg
20825000002 by Harting Electronics & Kg is a Telecom & Datacom Connector with 8 contacts, rated at 1.18A signal current. It features a dielectric voltage of 1000VDC and insulation resistance of 500MΩ, suitable for applications requiring polarized housing and IDC termination in telecom and datacom systems.
1051330001
Molex 1051330001 USB connector with gold termination, polyethylene insulator, and stainless steel shell. Ideal for telecom/datacom applications with UL standard compliance. Features include 1000000000 ohm insulation resistance, 140VAC dielectric voltage, and -30 to 85°C operating temperature range.
08261G1T23-F
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
48408-0003
The Molex 48408-0003 USB connector features nickel gold termination, polyethylene insulator, and 9 contacts. Ideal for telecom & datacom applications, it is a female receptacle with solder termination on board mounting.
RJHSE-5M80
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
95501-2661
Molex 95501-2661 is a telecom & datacom connector with body dimensions of 0.52" x 0.453" x 0.713". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
95503-2881
Molex 95503-2881 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.594" body width. It features GLASS FILLED LCP insulator material and MATTE TIN over NICKEL termination contact finish. Ideal for telecom and datacom applications due to its durability, UL certification, and solder termination type.
95503-2661
Molex 95503-2661 is a Telecom & Datacom Connector with 0.52" body length, 0.594" width, and 0.618" depth. It features 500000000 ohm insulation resistance, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom and datacom applications due to its durability of 750 cycles, UL flammability rating of 94V-0, and operating temperature range from -40°C to 80°C.
95501-6889
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mounting Option-1: LOCKING;
95501-2881
The Molex 95501-2881 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.713" depth. It features a glass-filled liquid crystal polymer insulator, TIN contact finish, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with a rated current of 1.5A and operating temperature range from -40°C to 85°C.
95503-6891
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Contact Resistance: 20 mohm;
95501-2441
Molex 95501-2441 is a telecom & datacom connector with 0.44" body length, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 500000000 ohm insulation resistance. Ideal for board mounting in applications requiring a right angle jack style connector with 4 contacts and solder termination.
95501-6669
The Molex 95501-6669 is a telecom and datacom connector with a body length of 0.52", width of 0.453", and depth of 0.809". It has an insulation resistance of 500MΩ, termination contact finish of TIN, and is made with glass-filled liquid crystal polymer. This connector is commonly used in telecommunications and data communication applications.
95503-2884
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; IEC Conformity: NO;
95503-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Filter Feature: NO; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER;
95501-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 20 mohm; MIL Conformity: NO;
95503-2441
The Molex 95503-2441 is a telecom and datacom connector with a body length of 0.44", width of 0.594", and depth of 0.618". It has a max operating temperature of 80°C and min operating temperature of -40°C. This connector is commonly used in commercial applications, offering durability with 750 cycles.
95501-2882
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; UL Flammability Code: 94V-0;
95501-2611
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): 20.016; No. of Ports: 1;
95501-6890
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulation Resistance: 500000000 ohm; Board Mounting Option: SPLIT BOARD LOCK;
95501-7661
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: .713 inch; Mating Contact Finish: NOT SPECIFIED;
95501-2401
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Reference Standard: UL;
95501-2601
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; Empty Shell: NO;
95501-2821
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Body or Shell Style: JACK;
95501-6649
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 4; Insulation Resistance: 500000000 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved