Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 95501-2641 is a telecom & datacom connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator. Featuring 4 contacts, it has a 0.52" body length and operates b/w -40 to 85°C. Ideal for board mounting with SPLIT BOARD LOCK option, this UL-certified connector offers high insulation resistance of 500000000 ohm.
Median Price
$0.734
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Avnet
1+ parts
$0.666
100+ parts
-
1k+ parts
10k+ parts
$0.578
Verical
$0.700
$0.680
$0.560
Adafruit Industries
$0.708
Mouser Electronics
$1.360
$0.881
$0.806
$0.755
DigiKey
$1.440
Element14
$76.260
$71.430
$70.540
PEI Genesis
Master Electronics
$0.704
$0.592
Chip1Stop
$0.839
$0.693
$0.492
Farnell
$0.563
TTI
Distrelec
TTI Europe
Newark
$0.884
$0.801
RS (Exports)
$0.697
Rapid Electronics
$0.611
Digiode
$0.665
Nova Conductors
$0.720
TestEquity
$0.750
TME
$0.770
$0.668
$0.621
$0.577
NAC Semi
$0.746
IBS Electronics
$0.675
Rutronik
$0.288
Vyrian
Sensible Micro Corp
LWI Electronics Inc
ComSIT Distribution GmbH
VNN
PC Components Company LLC
Bristol Electronics
Mentor Electronics Marketing, LLC
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Semicontronic
$0.411
$0.401
$0.399
Argo Parts USA
$0.599
$0.581
Corphita
$0.630
Advanced Electronics
Netroflash
Continental Prestige Electronics
$0.817
$0.562
$0.393
Aztec Data Supply Inc.
$10.323
Andel Nordic
$38.390
$26.870
Perfect Parts
Abacus Technologies
GreenTree Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Eastek
Assy Fe
The compact body length allows for easy installation in tight spaces.
High insulation resistance ensures signal integrity and reduces the risk of electrical shorts.
The slim body width saves valuable space on the PCB.
The adequate body depth provides stability and ensures a secure connection.
The high-quality insulator material enhances durability and reliability of the connector.
The high maximum operating temperature ensures the connector can withstand harsh environmental conditions.
The low minimum operating temperature allows for reliable performance even in cold environments.
The nickel shell finish provides corrosion resistance and enhances the connector's lifespan.
The specialized connector type is designed for telecom and datacom applications, ensuring compatibility and performance.
The high rated current capacity allows for efficient signal transmission without risk of overloading.
The black insulator color provides a sleek and professional appearance to the connector.
Compliance with UL standards ensures safety and quality of the connector.
Having multiple contacts allows for versatile connectivity options.
Board mounting option provides secure attachment to the PCB.
Standard terminal pitch facilitates easy connection to compatible devices.
Staggered PCB contact pattern allows for efficient use of space on the PCB.
Solder termination provides a reliable and durable connection.
Female contact gender is commonly used for connecting to male counterparts, ensuring compatibility.
Low contact resistance ensures minimal signal loss and efficient transmission.
Jack style body or shell allows for easy and secure connections.
Right angle mounting style provides flexibility in installation and saves space.
The telecom, modular contact style is commonly used in telecom and datacom applications for reliable connectivity.
The specified maximum insertion force ensures easy and secure connection without the risk of damage.
The locking mounting option provides additional security and stability to the connector.
Commercial-grade reliability ensures consistent performance and durability in everyday use.
Telecom & Datacom Connectors 95501-2641 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
95501-2641 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Sourcing 18/Nov/2021 Mult Devs Drawing Update 18/Feb/2022
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
PCN Packaging - Mult Devs Cancel Packaging Change 28/Dec/2023 Mult Devs Packaging 14/Sep/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Shandong Yiguang Electronic Joint Stock
Itt Semiconductor
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Leshan Radio
Frontier Electronics
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LL4148
Formosa Microsemi
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PCR-E96LMD+
Honda Tsushin Kogyo
PCR-E96LMD+ by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with 0.05" pitch, gold-plated contacts, and UL94V-0 flammability rating. It features a dielectric strength of 1100VAC, operating temperatures from -55 to 105°C, and solder termination for board mounting applications. Ideal for commercial use in telecommunications and data communication systems requiring high reliability.
124018312112A
Amphenol Communications Solutions
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Termination Contact Finish: Gold Flash (Au) - with Nickel (Ni) barrier;
HDR-E50MSG1+
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
2129320-3
TE Connectivity
TE Connectivity's 2129320-3 is a Telecom & Datacom Connector with POLYETHYLENE insulator, MATTE TIN finish, and STAINLESS STEEL shell. It has 20 contacts, rated for 115/230VAC mains connection, and features RIGHT ANGLE mounting style. Ideal for telecom and datacom applications requiring FEMALE contact gender and SOLDER termination.
6-555177-3
Commscope
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
UX60SA-MB-5ST(80)
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UX60SA-MB-5ST(80);
HDR-EA26LMYPG1-SLE+
HDR-EA26LMYPG1-SLE+ by Honda Tsushin Kogyo is a telecom & datacom connector with 26 gold contacts (Au) and glass-filled polyphenylene sulfide insulator. It features a nickel shell, surface mount termination, and right-angle mounting style. Ideal for applications requiring high-quality connectors in telecommunications and data communication systems.
5-2301995-4
TE Connectivity 5-2301995-4 is a EMI shielded telecom & datacom connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for applications requiring high temperature resistance and EMI shielding in telecommunications and data communication systems.
1051330021
Molex
USB CONNECTOR; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mating Contact Finish: NOT SPECIFIED;
1-2007562-5
TE Connectivity 1-2007562-5 is a Telecom & Datacom Connector with 12 ports and 240 contacts. It operates b/w -55°C to 105°C, meeting UL flammability code 94V-0. Ideal for board mounting, it features press fit termination and suits applications requiring high-density connectivity.
1-338086-6
TE Connectivity 1-338086-6 is a Telecom & Datacom Connector with 0.526" body length, 0.551" body width, and 500M ohm insulation resistance. It's a female jack connector for telecom applications, rated at 1.5A signal current with surface mount termination.
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
55100-0670
Molex 55100-0670 is a Telecom & Datacom Connector with Insulation Resistance of 1G ohm, Dielectric Voltage of 350VAC, and Operating Temp range from -40 to 85°C. It has a polarized housing for UL-rated signal currents up to 2A. Ideal for commercial applications requiring reliable cable mounting with solder lug termination.
2041517-1
TE Connectivity's 2041517-1 USB connector has a body size of 0.303" x 0.153" x 0.354", made of POLYAMIDE9T. With 5 contacts, it is rated for 1A signal current and can withstand temperatures from -40 to 85°C. Ideal for telecom/datacom applications, this connector offers durability with 5000 cycles and features a solder termination type.
57-10500-7
Amphenol
Amphenol 57-10500-7 is a Telecom & Datacom Connector with Gold (Au) - Nickel (Ni) finish, DIALLYL PHTHALATE insulator, and ZINC shell. Featuring 50 contacts, it is a male plug connector for cable mounting with UL94V-0 flammability rating. Ideal for telecom and datacom applications.
RJMG233022610ER
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE AND FEMALE; Shell Material: STAINLESS STEEL; Empty Shell: NO; PCB Contact Pattern: STAGGERED;
UX60A-MB-5ST
The Hirose Electric UX60A-MB-5ST is a Telecom & Datacom Connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for board mounting applications in telecom and datacom systems, this connector offers durability up to 5000 cycles at temperatures ranging from -30°C to 75°C.
67068-7041
Molex 67068-7041 USB connector features 2 rows, 4 contacts, and TIN termination finish. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The connector has a body length of 0.472", insulation resistance of 1Gohm, and operates b/w 0-50°C.
1734099-7
TE Connectivity's 1734099-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and 4000000 ohm insulation resistance. It features a liquid crystal polymer insulator and matte tin finish. Ideal for telecom/datacom applications requiring high durability and reliability in temperatures ranging from -35 to 85°C.
5406721-1
TE Connectivity 5406721-1 is a Telecom & Datacom Connector with 0.669" body length, 0.488" width, and Matte Tin finish. It features POLYETHYLENE insulator, POLYPHENYLENE SULFIDE shell material, and 8 contacts for board mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
95501-2661
Molex 95501-2661 is a telecom & datacom connector with body dimensions of 0.52" x 0.453" x 0.713". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
95503-2881
Molex 95503-2881 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.594" body width. It features GLASS FILLED LCP insulator material and MATTE TIN over NICKEL termination contact finish. Ideal for telecom and datacom applications due to its durability, UL certification, and solder termination type.
95503-2661
Molex 95503-2661 is a Telecom & Datacom Connector with 0.52" body length, 0.594" width, and 0.618" depth. It features 500000000 ohm insulation resistance, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom and datacom applications due to its durability of 750 cycles, UL flammability rating of 94V-0, and operating temperature range from -40°C to 80°C.
95501-6889
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Mounting Option-1: LOCKING;
95501-2881
The Molex 95501-2881 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.713" depth. It features a glass-filled liquid crystal polymer insulator, TIN contact finish, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with a rated current of 1.5A and operating temperature range from -40°C to 85°C.
95503-6891
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Contact Resistance: 20 mohm;
95501-2441
Molex 95501-2441 is a telecom & datacom connector with 0.44" body length, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 500000000 ohm insulation resistance. Ideal for board mounting in applications requiring a right angle jack style connector with 4 contacts and solder termination.
95501-6669
The Molex 95501-6669 is a telecom and datacom connector with a body length of 0.52", width of 0.453", and depth of 0.809". It has an insulation resistance of 500MΩ, termination contact finish of TIN, and is made with glass-filled liquid crystal polymer. This connector is commonly used in telecommunications and data communication applications.
95503-2884
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; IEC Conformity: NO;
95503-2641
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Filter Feature: NO; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER;
95501-6449
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Insulation Resistance: 500000000 ohm;
95503-2441
The Molex 95503-2441 is a telecom and datacom connector with a body length of 0.44", width of 0.594", and depth of 0.618". It has a max operating temperature of 80°C and min operating temperature of -40°C. This connector is commonly used in commercial applications, offering durability with 750 cycles.
95501-2882
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; UL Flammability Code: 94V-0;
95501-2611
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): 20.016; No. of Ports: 1;
95501-6890
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulation Resistance: 500000000 ohm; Board Mounting Option: SPLIT BOARD LOCK;
95501-7661
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: .713 inch; Mating Contact Finish: NOT SPECIFIED;
95501-2401
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Reference Standard: UL;
95501-2601
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; Empty Shell: NO;
95501-2821
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Body or Shell Style: JACK;
95501-6649
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 4; Insulation Resistance: 500000000 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved