Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol MRJR-5780-01 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features polyethylene insulator, zinc alloy shell, and nickel finish. Suitable for commercial applications with UL reference standard compliance, operating from -40 to 105°C in right-angle board mounting configuration.
Median Price
$30.444
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Avnet
1+ parts
$21.947
100+ parts
$20.595
1k+ parts
-
10k+ parts
Farnell
$23.600
$22.290
Arrow
$26.194
$19.278
TTI
$26.580
Heilind Electronics
$28.352
$23.626
Master Electronics
$29.690
$23.590
$22.960
Verical
$31.199
Interstate Connecting
$31.262
Mouser Electronics
$31.430
$24.370
$24.360
DigiKey
$33.200
$22.311
Newark
$35.960
$28.850
Element14
$44.290
$32.520
$29.770
Chip1Stop
$282.500
Future Electronics
$17.510
Rapid Electronics
$20.750
Electro Sonic
$24.112
$19.632
Vyrian
Nova Conductors
NAC Semi
$25.790
IBS Electronics
$29.751
Ampacity Inc.
$12.040
Gateway Technologies
$19.846
$17.662
Singapore Electronics
$21.830
$20.301
$19.428
$18.555
Continental Prestige Electronics
Aranea Global
Eastek
Argo Parts USA
Assy Fe
Perfect Parts
GreenTree Electronics
Polyethylene insulator provides good insulation and durability, ensuring reliable performance of the connector.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising its functionality.
The low minimum operating temperature allows this connector to be used in various environments, including those with colder temperatures.
The nickel shell finish adds durability and corrosion resistance to the connector, extending its lifespan.
Designed specifically for telecom and datacom applications, this connector is optimized for use in these industries.
With a rated current of 1.5 A, this connector can handle signal transmission efficiently without risk of overloading.
Compliance with UL standards ensures the connector meets safety and performance requirements set by regulatory bodies.
Having 8 contacts allows this connector to support multiple data or signal lines, making it versatile for various applications.
Board mounting type provides ease of installation and secure attachment to circuit boards.
Zinc alloy shell material offers a balance of strength and lightweight construction, making the connector reliable yet not bulky.
Solder termination ensures a strong and reliable connection between the connector and the circuit, reducing the risk of signal loss or interference.
Male contact gender is commonly used in connectors, providing compatibility with a wide range of female connectors for seamless connectivity.
Low contact resistance of 80 mOhm ensures efficient signal transmission with minimal loss or interference.
Jack body or shell style is versatile and commonly used, allowing for easy mating with different types of connectors.
Right-angle mounting style offers flexibility in installation and space-saving benefits, ideal for compact designs or tight spaces.
Modular contact style is widely used in telecom applications, providing interchangeability and flexibility in system configurations.
Threaded mounting option ensures a secure and stable connection between the connector and the mounting surface, preventing loosening or disconnection.
Utilizing #4-40 mounting option provides compatibility with standard hardware and tools for easy and convenient installation.
With a commercial reliability rating, this connector is suitable for various commercial applications where consistent performance is required.
Telecom & Datacom Connectors MRJR-5780-01 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Insulator Material:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
MRJR-5780-01 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
Bytesonic Electronics
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
EU2B-YS2J03F
Idec
ROTARY SWITCH;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MUSB-K152-30
Amphenol
MUSB-K152-30 by Amphenol is a USB connector with 5 contacts, rated at 1.8A signal current. It has a dielectric voltage of 100VAC and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it features a polarized housing and staggered PCB contact pattern for secure solder termination.
10029449-111RLF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10029449-111RLF is a Telecom & Datacom Connector with 0.59" body length, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for telecom and datacom applications, this connector features POLYETHYLENE insulator material, FLASH plating, and a rated current of 0.5A.
RJSAE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Length: .1 inch; Reference Standard: UL; Insulator Color: BLACK;
47590-1001
Molex
47590-1001 by Molex is a USB connector with 5 contacts, made of brass and housed in a stainless steel shell. It has a liquid crystal polymer insulator and matte tin finish. This right-angle receptacle is commonly used in telecom and datacom applications for surface mount board mounting.
RJHSE-5380-A8
TELECOM AND DATACOM CONNECTOR;
SFPK-SL
Samtec
SFPK-SL by Samtec is a telecom & datacom connector with 20 contacts, LIQUID CRYSTAL POLYMER insulator, and UL 94V-0 flammability rating. It features a right-angle mounting style for board termination applications.
632722110112
Wuerth Elektronik & Kg
632722110112 by Wurth Elektronik is a USB connector with 24 contacts, rated for 5A signal current. It features gold over nickel termination, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom & datacom applications, it has an insulation resistance of 100M ohm and operates b/w -40 to 85°C.
44144-0003
The Molex 44144-0003 is a telecom & datacom connector with 0.6" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, female contact jack with 8 contacts. Operating temperature range from -40 to 80°C makes it suitable for commercial use.
5557969-1
TE Connectivity
TE Connectivity 5557969-1 is a Telecom & Datacom Connector with EMI shielding. It features 0.715" body length, 0.66" width, and 0.658" depth. Ideal for telecom applications due to its UL-rated durability and polarization key for polarized housing.
UX60-MB-5ST
Hirose Electric
The Hirose Electric UX60-MB-5ST is a USB connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for telecom/datacom applications, it offers surface mount termination and a durability of 5000 cycles.
1050570001
Molex 1050570001 is a USB connector with a body length of 0.576 inch, body width of 0.285 inch, and insulation resistance of 1000000000 ohm. It is commonly used in telecom and datacom applications for board mounting with solderable retention clips.
5787834-1
TE Connectivity USB Connector 5787834-1 with 2 rows, 4 contacts, and POLYETHYLENE insulator. Rated for 1A signal current, -55 to 85°C operating range. Ideal for telecom/datacom applications requiring durable board-mounted connectors.
241007
Lumberg Connect
The Lumberg Connect 241007 USB connector features a body length of 0.472", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for telecom applications, this male plug connector with solderable retention clips offers reliable signal current of 1A in a right-angle mounting style.
292304-3
TE Connectivity's 292304-3 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 0.435" body width. Ideal for telecom/datacom applications with 2 rows loaded, solderable retention clips, and rated current of 1A.
48037-2200
The Molex 48037-2200 USB connector features gold termination, glass-filled polyamide46 insulator, and brass contact material. Ideal for telecom & datacom applications, it offers a rated current of 1.5A, durability of 1500 cycles, and operates b/w -20 to 85°C.
67068-8011
Molex 67068-8011 USB connector with 4 contacts, rated at 1.5A signal current, features GLASS FILLED POLYAMIDE insulator material and COPPER ALLOY shell for durability. Suitable for telecom/datacom applications, it offers a dielectric voltage of 750VAC and operates b/w -50°C to 0°C temperature range.
12402012E212A
The Amphenol Communications Solutions 12402012E212A USB connector features a body length of 0.352", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this male connector has a total of 24 contacts, rated at 5A signal current, with a durability of 10k cycles.
7499011121A
7499011121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Nickel shell finish. Ideal for board mounting applications, featuring female contact gender and solder termination.
USB3130-30-A
Global Connector Technology
USB3130-30-A by Global Connector Technology is a USB connector with 5 contacts, rated at 1A signal current. It features gold over nickel termination finish, liquid crystal polymer insulator, and staggered PCB contact pattern. Ideal for telecom/datacom applications, it offers durability of 10k cycles and operates b/w -55 to 85°C.
2171800001
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MRJR-5384-B1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -40 Cel; Shell Finish: NICKEL;
MRJR54810F
Amphenol Icc
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 50u; Rated Current - Signal: 1.5 A;
MRJR-5481-0F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-2: LOCKING; Filter Feature: NO;
MRJR-5380-P1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: TELCOM, MODULAR; DIN Conformance: NO;
MRJR54800F
MRJR54800F by Amphenol Icc is a Telecom & Datacom Connector with 8 contacts, rated for 1.5A signal current. It features a Polycarbonate insulator, Phosphor Bronze contact material, and Tin over Nickel termination finish. Ideal for telecom and datacom applications requiring reliable connectivity in temperatures ranging from -40 to 150°C.
MRJR-5480-0F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Terminal Pitch (mm): 2.54; Minimum Operating Temperature: -40 Cel;
MRJR-548A0F
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: AU ON NI; Termination Type: SOLDER; Contact Style: TELCOM, MODULAR;
MRJR-5380-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: BOARD; Shell Material: ZINC ALLOY; Plating Thickness (inch): 50u;
MRJR-5385-B1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: TELCOM, MODULAR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
MRJR-53A1-B1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: BOARD; Contact Style: TELCOM, MODULAR; Terminal Pitch (mm): 2.54;
MRJR-5780-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; No. of Ports: 1; Mounting Option-2: THREADED;
MRJR-5781-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: BOARD; Mounting Style: RIGHT ANGLE; Shell Material: ZINC ALLOY;
MRJR-5781-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Temperature (Cel): 105; Shell Material: ZINC ALLOY; Contact Resistance: 80 mohm;
MRJR-5784-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: AU ON NI; Minimum Operating Temperature: -40 Cel; Mounting Option-2: THREADED;
MRJR-5784-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: JACK; Mating Contact Finish: AU ON NI; Contact Resistance: 80 mohm;
MRJR-5785-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: ZINC ALLOY; Contact Style: TELCOM, MODULAR; Mounting Type: BOARD;
MRJR-5785-M1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Rated Current - Signal: 1.5 A; Mounting Type: BOARD; Mounting Option-2: THREADED;
MRJR-538D-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Body or Shell Style: JACK; Maximum Operating Temperature (Cel): 105;
MRJR-53AD-01
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; PCB Contact Pattern: STAGGERED; Minimum Operating Temperature: -40 Cel; Rated Current - Signal: 1.5 A;
MRJR-578001-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Contact Pattern: RECTANGULAR; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved