Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; Insulator Color: BLUE;
Median Price
$1.937
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Newark
1+ parts
$1.350
100+ parts
$1.060
1k+ parts
$0.793
10k+ parts
-
Farnell
$1.644
$1.417
Distrelec
$2.230
$1.587
Chip1Stop
$12.200
Interstate Connecting
Heilind Electronics
Greenchips
$0.827
$0.532
TME
$1.410
$1.090
$1.050
Nova Conductors
$1.649
Freelance Electronics
$4.055
$4.257
$4.014
DF Sales Co.
$6.840
TEDSS.com
$19.990
VNN
Prism Electronics
Vyrian
SIE Connect GmbH - GreenChips
Netsource Technology, Inc.
R&J Components
ACDS - Activité Composants Distribution Service
SPM Sales
Sunrise Surplus Inc.
ICP Electronique
Electronic Expediters
Semi Source
Pegasus Components GmbH
Standard Data Resources
Mil-Aero Solutions, Inc.
Van Brakel Electronic
Resion
ZD Integrated Circuits Inc.
American Connector Supply Corp
Electronics Depot
Q Components
Sensible Micro Corp
$0.546
$0.504
Bristol Electronics
EMSNET
First Choice Components Inc.
Speed Components Ltd
MISTER SPROCKETS
PAR Electronics
NPI Materials, Inc.
Ampacity Inc.
$1.100
Gateway Technologies
$1.220
$1.085
Singapore Electronics
$1.342
$1.248
$1.194
$1.140
Aranea Global
$1.616
$1.551
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
$10.158
$9.650
Perfect Parts
Cyclops Electronics Ltd (Excess)
Assy Fe
4 Star Electronics, Inc. (Excess)
Telecom & Datacom Connectors 57-10500 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Cinch Connectivity Solutions
Additional Features:
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
57-10500 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Yangzhou Yangjie Electronics
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Bkc Semiconductors
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Won-top Electronics
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PX0833/E
Bulgin
The Bulgin PX0833/E is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and UL 94V-0 flammability rating. It features polarized housing for secure connections and is ideal for panel mounting in telecom applications.
760445001
Molex
The Molex 760445001 is a telecom and datacom connector with glass-filled plastic insulator material. It has a max operating temperature of 100°C and a min operating temperature of -40°C. With 2 ports and a total of 40 contacts, it is suitable for board mounting in commercial applications.
2-6339191-1
TE Connectivity
TE Connectivity 2-6339191-1 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a right-angle jack body style and surface mount termination for durability in commercial settings.
MUSBR-4193-M0
Amphenol Communications Solutions
MUSBR-4193-M0 by Amphenol is a USB connector with 4+4 contacts, rated at 1.8A signal current. It features high temp thermoplastic insulation, zinc alloy shell material, and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring durable, polarized connectors with UL certification.
2137160001
TELECOM AND DATACOM CONNECTOR;
MHRJ-12-6P6C-R
Mh Connectors
MHRJ-12-6P6C-R by Mh Connectors is a POLYCARBONATE TELECOM & DATACOM CONNECTOR with 6 contacts, UL 94V-0 rated. It is a MALE PLUG for CABLE mounting applications in telecom and datacom systems.
UX60SC-MB-5S8(80)
Hirose Electric
The Hirose Electric UX60SC-MB-5S8(80) is a USB connector with 5 contacts, rated at 1A signal current. Featuring a dielectric voltage of 100VAC and insulation resistance of 100MΩ, it's ideal for telecom/datacom applications. With a durable design lasting up to 5000 cycles, this right-angle mount connector has a shell finish of TIN and insulator material made from synthetic resin.
ARJM11D7-104-AB-EW2
Abracon
ARJM11D7-104-AB-EW2 by Abracon is a Telecom & Datacom Connector with gold termination, 8 contacts, and right angle mounting. It features a polarized housing, staggered PCB contact pattern, and solder termination type. Ideal for telecom and datacom applications requiring reliable board mounting with locking option.
43860-0019
Molex 43860-0019 Telecom & Datacom Connector features Insulation Resistance of 500MΩ, Rated Current - Signal of 1.5A, and Contact Resistance of 20mΩ. Ideal for board mounting in telecom and datacom applications with UL Flammability Code 94V-0.
5406721-1
TE Connectivity 5406721-1 is a Telecom & Datacom Connector with 0.669" body length, 0.488" width, and Matte Tin finish. It features POLYETHYLENE insulator, POLYPHENYLENE SULFIDE shell material, and 8 contacts for board mounting applications.
2171840001
2041441-1
TE Connectivity 2041441-1 is a Telecom & Datacom Connector with Matte Tin finish. It uses LIQUID CRYSTAL POLYMER insulator, suitable for board mounting at temperatures from -40 to 85°C. With 20 contacts, it's ideal for telecom and datacom applications requiring 0.5A signal current rating.
5-2301996-3
TE Connectivity 5-2301996-3 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications due to its nickel finish, UL certification, and solder termination.
5558342-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Board Mounting Option: PEG; Shell Material: COPPER ALLOY; Insulator Material: POLYAMIDE;
54601906WPLF
Amphenol's 54601906WPLF is a Telecom & Datacom Connector with 0.52" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems due to its durable design and reliable performance.
6364372-2
TE Connectivity's 6364372-2 is a USB connector with a body length of 0.517 inch, body width of 0.276 inch, and body depth of 0.551 inch. It is used in telecom and datacom applications, has a max operating temperature of 85°C, and offers a rated current of 1A.
MUSB-A511-00
Amphenol
MUSB-A511-00 by Amphenol is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it has a zinc alloy shell, gold mating contacts over nickel, and solder termination for reliability (UL94V-0).
48408-0003
The Molex 48408-0003 USB connector features nickel gold termination, polyethylene insulator, and 9 contacts. Ideal for telecom & datacom applications, it is a female receptacle with solder termination on board mounting.
67329-8020
Molex 67329-8020 USB connector features 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, with glass-filled polyamide insulator material and solder termination type. Offers durability of 1500 cycles and rated current of 1A for commercial reliability.
RJCSE-5380-01
RJCSE-5380-01 by Amphenol is a telecom and datacom connector with a body size of 0.64" x 0.53" x 0.615". It has 8 contacts, a 50u plating thickness, and is made of stainless steel. This right angle jack connector is suitable for surface mount applications in the telecommunications and data communications industry.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
57-10500
Amphenol 57-10500 is a Telecom & Datacom Connector with dimensions of 3.26" x 0.61" x 0.51". It has an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 1200VAC, and operates b/w -55 to 105°C. Ideal for telecom/datacom applications, it features UL-rated connectors, male contact gender, and solder termination type.
57-10500-7
Cinch Connectivity Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Design: PREASSEM CONN; Insulation Resistance: 1000000000 ohm;
Amphenol 57-10500-7 is a Telecom & Datacom Connector with Gold (Au) - Nickel (Ni) finish, DIALLYL PHTHALATE insulator, and ZINC shell. Featuring 50 contacts, it is a male plug connector for cable mounting with UL94V-0 flammability rating. Ideal for telecom and datacom applications.
57-10240
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Empty Shell: NO; Mating Contact Pitch (inch): 0.085;
57-10240-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: DIALLYL PHTHALATE; Empty Shell: NO;
Amphenol 57-10240-4 is a telecom/datacom connector with 24 contacts, 0.085" pitch, and 700VDC dielectric voltage. It has a zinc finish, operates b/w -55 to 105°C, and supports wire sizes from 22 to 24 AWG. Ideal for commercial applications requiring reliable male plug connectors with bellowed contact style.
57-10500-14
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Wire Size: 26 AWG; Mounting Option-1: #4-40;
57-10500-48
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: DUAL PRONG; MIL Conformity: NO;
57-10500-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; Insulator Color: BLUE;
57-10500-79
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Reference Standard: CSA, UL; Mixed Contacts: NO;
57-10360-WW1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Material: STEEL; Mounting Option-2: NON-THREADED;
57-10500-WW1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; JESD-609 Code: e4; Terminal Length: 1.35 inch;
57-10500-WW2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Shell Finish: ZINC;
57-10500-WW3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Empty Shell: NO; Mounting Style: STRAIGHT;
57-10500-27
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; Reference Standard: CSA, UL; IEC Conformity: NO;
57-10500-46
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; Plating Thickness (inch): 20u; Mounting Style: STRAIGHT;
57-10500-69
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; Contact Material: COPPER ALLOY; Insulator Material: DIALLYL PHTHALATE;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; UL Flammability Code: 94V-0; Total No. of Contacts: 50;
57-10500-73
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; Minimum Operating Temperature: -55 Cel; Insulator Material: DIALLYL PHTHALATE;
57-10500-77
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VDC; Reference Standard: CSA, UL; Total No. of Contacts: 50;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved