Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Body Width: .255 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$6.954
$6.676
Corphita
Telecom & Datacom Connectors 472720003 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
472720003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
MUSB-C511-00
Amphenol
Amphenol MUSB-C511-00 USB connector with 1.201" body length, 500VAC dielectric voltage, and 105°C max temp. Ideal for telecom/datacom applications, featuring solder termination, 30u plating thickness, and UL94V-0 flammability rating.
1775690-2
TE Connectivity
TE Connectivity's 1775690-2 is a telecom and datacom connector with a polyethylene insulator, board lock mounting option, and nickel shell finish. It has a max operating temperature of 85°C and is rated for 2.5A signal current. This connector is commonly used in telecommunications and data communication applications.
2000890000
Weidmueller & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
09451151560
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
ECF504-SC5E-MINI
Infinite Electronics International
TELECOM AND DATACOM CONNECTOR;
12401610E4#2A
The Amphenol 12401610E4#2A is a telecom & datacom connector with dimensions of 0.361" x 0.129" x 0.413". It features 24 contacts, rated for 5A signal current, UL94V-0 flammability. This female USB connector has a right-angle mounting style and surface mount termination, suitable for board applications.
4-1734035-2
TE Connectivity's 4-1734035-2 is a USB connector with a body length of 0.303 inch, body width of 0.155 inch, and body depth of 0.33 inch. It is used in telecom and datacom applications for board mounting with solder hold down option.
67298-3091
Molex
The Molex 67298-3091 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator. It has 8 contacts, solder termination, and a 30u tin plating thickness. Ideal for telecom/datacom applications, it offers right-angle mounting with locking option for reliable commercial use.
2012670005
Molex 2012670005 USB connector features POLYETHYLENE insulator, 24 contacts, and 105°C max operating temp. Ideal for telecom/datacom applications with BOARD MOUNTING FLANGE option and FEMALE contact gender. Designed for durability with STAINLESS STEEL shell material and rated at 5A signal current.
749195-2
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
M90-7011645
Harwin Plc
The Harwin PLC M90-7011645 is a telecom/datacom connector with 16 contacts, gold-plated brass material, and 1A signal current rating. It features a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperatures from -40°C to 100°C. Ideal for board and panel mounting in commercial applications requiring reliable connectivity.
MRJ-5480-01
Amphenol MRJ-5480-01 is a Telecom & Datacom Connector with gold-plated contacts, polyethylene insulator, and zinc alloy shell. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting with solder termination. Operating temperature range from -40 to 105°C makes it ideal for commercial applications requiring reliable connectivity.
SI-51005-F
Bel Fuse
Bel Fuse SI-51005-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 1" depth. It features POLYETHYLENE insulator material, NICKEL/TIN shell finish, and SOLDER termination type. Ideal for board and panel mounting in telecommunications applications.
65100516121
Wuerth Elektronik & Kg
65100516121 USB connector by Wurth Elektronik features a body length of 0.378", insulation resistance of 1Gohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a gold finish, liquid crystal polymer insulator, and operates b/w -40 to 105°C.
1734100-4
TE Connectivity's 1734100-4 is a Telecom & Datacom Connector with 40 contacts, 1A signal rating, and 600 cycle durability. Featuring a mating contact pitch of 0.05", it uses Matte Tin finish contacts for applications requiring high insulation resistance and UL94V-0 flammability compliance.
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
UX60SA-MB-5ST(80)
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UX60SA-MB-5ST(80);
5520259-4
TE Connectivity 5520259-4 is a Telecom & Datacom Connector with 0.715" body length, 0.63" width, and 0.65" depth. It has 500M ohm insulation resistance, PBT-POLYESTER insulator material, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications due to its UL-rated design, polarized housing, and solder termination.
6-641337-3
TE Connectivity 6-641337-3 is a Telecom & Datacom Connector with 0.384" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features phosphor bronze contacts, clear insulator color, and durable design rated for 750 cycles.
RJE3A-188-1341
Amphenol Communications Solutions
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved