Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$9.364
$8.989
Corphita
Telecom & Datacom Connectors 67643-3991 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
67643-3991 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Continental Device India
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Comset Semiconductors
Fairchild Semiconductor
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
UE27-AC54-100
Amphenol Communications Solutions
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Reference Standard: UL; Contact Style: USB 2.0 A;
FCN-361J008-AU
Fujitsu
FCN-361J008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features gold-silver contact finish, copper alloy material, and polyester insulation for high reliability in commercial applications. With a mating contact pitch of 0.1 inch, this connector is suitable for telecom and datacom systems operating b/w -55°C to 85°C.
A-2014-2S-4-N-R
Assmann Wsw Components
A-2014-2S-4-N-R by Assmann Wsw Components is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500MΩ, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable connectors with solder termination and staggered PCB contact pattern.
54819-1572
Molex
54819-1572 by Molex is a USB connector with 5 contacts, 0.39" body length, and 0.156" body width. It features liquid crystal polymer insulation material and tin termination finish. Ideal for telecom/datacom applications, it offers 5000 cycle durability and operates b/w 0-50°C temperature range.
PCR-E20FS
Honda Tsushin Kogyo
PCR-E20FS by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" pitch, suitable for commercial applications. Featuring a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it has a nickel finish, solder termination, and can handle up to 1A signal current. Ideal for use in telecommunications and data communication systems.
CX70M-24P1
Hirose Electric
USB CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD;
2013595-3
TE Connectivity
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
12401598E4#2A
Amphenol
Amphenol's 12401598E4#2A USB connector features gold flash termination, polymer insulator, and nickel shell finish. With 24 contacts, it is ideal for telecom & datacom applications requiring surface mount board mounting in a right angle configuration.
MUSB-05-F-B-SM-A-FR
Samtec
Samtec's MUSB-05-F-B-SM-A-FR is a USB connector with LIQUID CRYSTAL POLYMER insulator, suitable for Telecom & Datacom applications. Featuring 5 contacts, it has a durability of 1500 cycles and operates b/w -50 to 85°C. With a right-angle mounting style and surface mount termination, it offers a plating thickness of 1u inch.
7499111121A
Wuerth Elektronik & Kg
7499111121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. Ideal for board mounting applications in telecom and datacom systems due to its nickel shell finish and copper alloy material.
RJHSE-5380
Amphenol's RJHSE-5380 is a telecom and datacom connector with a body length of 0.65", width of 0.53", and depth of 0.62". It has a matte tin termination contact finish, polyethylene insulator material, and can operate b/w -55°C to 85°C. This right angle jack connector is commonly used in board and panel mounting applications.
5787617-1
TE Connectivity's 5787617-1 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom/datacom applications with a rated current of 1A, right angle mounting style, and durability of 1500 cycles.
RJSAE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Length: .1 inch; Reference Standard: UL; Insulator Color: BLACK;
J1011F01PNL
Pulse Electronics
J1011F01PNL by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.55" width, and 1" depth. Featuring matte tin finish, polyethylene insulator, and nickel shell. Ideal for board and panel mounting in telecommunications applications.
PX0443
Bulgin
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
SS-7188S-A-NF-K1-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-K1-50 is a 2-row, 8-contact telecom & datacom connector with POLYETHYLENE insulator. Featuring SPLIT BOARD LOCK mounting, it has 0.635" x 0.55" x 0.85" dimensions and NICKEL/TIN finish. Ideal for commercial applications requiring right-angle board mounting with 2.54mm terminal pitch.
USB4125-GF-A
Global Connector Technology
USB4125-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -30°C to 85°C. Ideal for telecom & datacom applications, it has a right-angle mounting style and surface mount termination type.
ECF504-SC6-MINI
Infinite Electronics International
Telecom and Datacom Connectors;
RJMG233022610ER
Amphenol RJMG233022610ER USB connector features gold mating contacts, tin termination finish, and polybutylene terephthalate insulator. Ideal for telecom/datacom applications, it offers a right-angle mounting style on the board with female-to-female contact gender.
87824-0015
Molex 87824-0015 is a Telecom & Datacom Connector with 29 contacts, TIN finish, and glass-filled LCP insulator. It's a female receptacle connector for surface mount applications on boards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved