Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43860-0013 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It features insulation resistance of 500MΩ, matte tin over nickel termination contact finish, and UL94V-0 flammability rating. Ideal for board mounting applications in commercial settings with operating temperatures from -40°C to 85°C.
Median Price
$2.896
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.397
100+ parts
$2.017
1k+ parts
$1.896
10k+ parts
-
Verical
$2.530
$2.410
$1.920
Interstate Connecting
$2.540
$2.293
Adafruit Industries
$3.282
$3.118
DigiKey
$3.440
RS Americas
$3.460
$2.670
$2.360
Element14
$3.630
$2.430
Distrelec
$3.677
$2.123
$2.080
Mouser Electronics
$3.970
$2.690
$2.260
$2.180
Farnell
$4.066
$2.892
$2.065
Newark
$4.440
$3.130
$2.700
PEI Genesis
Chip1Stop
$1.800
$1.680
$1.390
Master Electronics
$2.780
$2.330
$2.170
Powell Electronics
$2.310
$2.090
TTI Europe
$1.640
$1.554
TTI
$1.490
$1.420
Avnet
$2.231
$1.914
Greenchips
$1.720
$1.638
$1.560
$1.408
Nova Conductors
$1.787
Digiode
$1.831
TME
$3.450
$2.510
$2.230
Freelance Electronics
$81.007
IBS Electronics
$2.300
$1.988
$1.575
NAC Semi
$2.290
$2.110
Vyrian
VNN
Avant Electronics Limited
SIE Connect GmbH - GreenChips
Extreme Components
Connector Distribution Corp
Right Parts Inc.
Standard Data Resources
LIBRA Elektronik GmbH
Atlantic Semiconductor
Semtec, LLC
Bristol Electronics
Semicontronic
$1.160
$1.131
$1.125
Corphita
$1.734
Argo Parts USA
$1.770
Bastille Electronics
$1.698
$1.613
$1.590
Continental Prestige Electronics
$1.570
Advanced Electronics
Andel Nordic
$3.621
$3.477
Aztec Data Supply Inc.
$8.364
Perfect Parts
Kepictronics
GreenTree Electronics
Assy Fe
Abacus Technologies
EMSNET (Excess)
Eastek
Provides a compact and space-saving design for efficient use in telecom and datacom applications.
Ensures reliable and high-quality signal transmission by minimizing the risk of electrical interference or leakage.
Offers durability and corrosion resistance, ensuring a long lifespan for the connector in various operating environments.
Provides excellent mechanical strength and thermal stability for reliable performance in demanding conditions.
Adds further protection against wear and tear, contributing to the overall robustness of the connector.
Allows for multiple signal connections, making it suitable for complex telecom and datacom systems that require versatile connectivity.
Facilitates easy installation and space optimization, particularly in applications where vertical space is limited.
Ensures consistent performance and longevity in commercial-grade applications, meeting industry standards for reliability.
Telecom & Datacom Connectors 43860-0013 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43860-0013 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Component Housing Update 18/Dec/2014
PCN Assembly/Origin - Mult Devs Tool Duplication 11/Mar/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NXP Semiconductors
Rfe International
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Pro-an Electronic
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
USB-B-S-F-B-TH-FR
Samtec
Samtec USB-B-S-F-B-TH-FR is a USB connector with 4 contacts, POLYBUTYLENE TEREPHTHALATE insulator, and NICKEL shell finish. It has a PCB contact row spacing of 2.5mm and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications due to its durability of 1500 cycles and right-angle mounting style with retention clips.
SI-50154-F
Bel Fuse
Bel Fuse SI-50154-F is a Telecom & Datacom Connector with 0.708" x 0.599" x 1" dimensions. Featuring 8 contacts, POLYETHYLENE insulator, and NICKEL/TIN finish, it's ideal for board and panel mounting in telecommunications applications. The connector has a polarization key, solder termination type, and right-angle mounting style for secure connections.
SS-6488S-A-NF-50
Bel Fuse SS-6488S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and COPPER ALLOY shell. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring reliable right-angle board connections.
43202-8919
Molex
Molex 43202-8919 is a telecom & datacom connector with 0.624" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its durability, UL certification, and female contact gender. Operating temperature range from -40°C to 70°C makes it suitable for commercial use.
PCR-E20FS
Honda Tsushin Kogyo
PCR-E20FS by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" pitch, suitable for commercial applications. Featuring a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it has a nickel finish, solder termination, and can handle up to 1A signal current. Ideal for use in telecommunications and data communication systems.
12401826E412A
Amphenol Communications Solutions
The Amphenol Communications Solutions 12401826E412A USB connector features a body length of 0.362", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a matte tin over nickel finish, black insulator color, and is rated for 5A signal current.
MUSBR-M1C1-M0
The Amphenol MUSBR-M1C1-M0 USB connector features 24 contacts, rated at 5A signal current. With a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it is ideal for telecom applications. Its compact dimensions (0.925" x 0.346" x 0.491") make it suitable for board and panel mounting in various datacom setups.
472720001
The Molex 472720001 is a telecom & datacom connector with 0.7" body length, 100000000 ohm insulation resistance, and 707VAC dielectric voltage. It features a glass-filled liquid crystal polymer insulator and gold termination finish. Ideal for board mounting in applications requiring high durability and reliability such as telecommunications and data communications.
MUSB-K152-30
Amphenol
MUSB-K152-30 by Amphenol is a USB connector with 5 contacts, rated at 1.8A signal current. It has a dielectric voltage of 100VAC and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it features a polarized housing and staggered PCB contact pattern for secure solder termination.
749195-2
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
1734035-4
TE Connectivity USB Connector 1734035-4 features Insulation Resistance of 100MΩ, Body Length 0.303", and Shell Finish Nickel. Ideal for Telecom & Datacom applications, with Board Mounting Option and Terminal Pitch of 0.8mm for surface mount termination.
1-5749111-0
TE Connectivity 1-5749111-0 is a telecom & datacom connector with 26 contacts, rated at 1A. It features EMI shielding, polyethylene insulation, and TIN over nickel termination finish. Ideal for commercial applications requiring durable connectors with a temperature range of -55 to 105°C.
MRJR-5384-B1
Amphenol MRJR-5384-B1 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. Featuring a zinc alloy shell, it has a body size of 1.193" x 0.709" x 1.115". Ideal for board mounting with solder termination, this UL-rated connector operates b/w -40°C to +105°C.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
RJHSE-3381
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
2041441-1
TE Connectivity 2041441-1 is a Telecom & Datacom Connector with Matte Tin finish. It uses LIQUID CRYSTAL POLYMER insulator, suitable for board mounting at temperatures from -40 to 85°C. With 20 contacts, it's ideal for telecom and datacom applications requiring 0.5A signal current rating.
SS-6466-NF-A431
Bel Fuse's SS-6466-NF-A431 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY contacts, and 30u plating thickness. It has 6 contacts, rated at 1.5A for signal current, UL94V-0 flammability code. Ideal for board mounting in telecom and datacom applications due to its right-angle mounting style and staggered PCB contact pattern.
2178126-2
TE Connectivity 2178126-2 is a Telecom & Datacom Connector with 0.761" body length, 0.547" width, and POLYETHYLENE insulator. It has 8 contacts for PCB mounting in right angle style. Ideal for telecommunications and data communication applications.
DX07S024JJ3R1300
Japan Aviation Electronics Industry
USB CONNECTOR;
629105136821
629105136821 USB connector by Wurth Elektronik features a body length of 0.315", insulation resistance of 1G ohm, and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a liquid crystal polymer insulator, gold termination finish, and operates b/w -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43860-0001
Molex 43860-0001 is a Telecom & Datacom Connector with 0.62" body length, 0.52" width, and 0.59" depth. It features Matte Tin finish, GLASS FILLED POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with 8 contacts, rated at 1.5A signal current.
43860-0010
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 50u; Mounting Option-1: LOCKING;
43860-0016
Molex 43860-0016 is a telecom and datacom connector with a body length of 0.645", width of 0.533", and depth of 0.62". It has an insulation resistance of 500MΩ and is commonly used in board mounting applications.
43860-0004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 8; Mixed Contacts: NO;
43860-0012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; IEC Conformity: NO;
43860-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; PCB Contact Pattern: STAGGERED;
43860-0017
Molex 43860-0017 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It has an insulation resistance of 500M ohm, operates b/w -40°C to 85°C, and features a nickel shell finish. Ideal for board mounting with UL certification, this female connector has 6 contacts and solder termination for commercial applications.
43860-0014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .533 inch; Termination Contact Finish: NOT APPLICABLE;
43860-0019
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; No. of Ports: 1;
43860-0025
Molex 43860-0025 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 0.533" body width. Ideal for board mounting with staggered PCB contact pattern, it operates b/w -40°C to 85°C and has UL94V-0 flammability rating.
43860-0002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Style: RIGHT ANGLE;
43860-0007
Molex 43860-0007 is a Telecom & Datacom Connector with 0.62" body length, 0.52" width, and 0.59" depth. It features 500M ohm insulation resistance, TIN over nickel termination contact finish, and glass-filled polyamide insulator material. Ideal for board mounting with hole option of 0.125-0.137", it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
43860-0005
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .62 inch; Maximum Operating Temperature (Cel): 85;
43860-0006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Rated Current - Signal: 1.5 A;
43860-0009
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYAMIDE; Insulator Color: BLACK;
43860-0018
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Mounting Type: BOARD;
43860-0023
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Rated Current - Signal: 1.5 A;
43860-0026
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .62 inch; Body Width: .533 inch;
43860-0027
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; DIN Conformance: NO;
43860-0031
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYAMIDE; Terminal Length: .11 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved