Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43860-0007 is a Telecom & Datacom Connector with 0.62" body length, 0.52" width, and 0.59" depth. It features 500M ohm insulation resistance, TIN over nickel termination contact finish, and glass-filled polyamide insulator material. Ideal for board mounting with hole option of 0.125-0.137", it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
Median Price
$1.420
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
$1.250
100+ parts
$1.047
1k+ parts
$0.914
10k+ parts
-
Verical
$1.360
$1.310
$1.260
Farnell
$0.930
$0.868
Chip1Stop
$1.760
DigiKey
$1.900
Mouser Electronics
$2.340
$1.730
$1.490
$1.240
Avnet
$1.058
Master Electronics
$1.680
$1.450
$1.190
Powell Electronics
$1.200
$1.160
Interstate Connecting
$1.341
$1.092
Element14
$1.580
$1.370
$1.230
Digiode
$0.213
Component Sense
VNN
Sensible Micro Corp
IBS Electronics
$1.579
$1.495
$1.241
Vyrian
TME
Bristol Electronics
Atlantic Semiconductor
Nova Conductors
Inventory MP
NAC Semi
Prism Electronics
Corphita
$0.202
Continental Prestige Electronics
$0.901
$0.786
Andel Nordic
$1.527
$1.466
Aztec Data Supply Inc.
$8.610
Kepictronics
Perfect Parts
Aranea Global
Argo Parts USA
GreenTree Electronics
The compact size of the connector makes it ideal for applications where space is limited.
High insulation resistance ensures reliable and stable connections.
The slim design allows for efficient use of board space.
This finish provides excellent conductivity and corrosion resistance.
The depth of the connector allows for secure and stable connections.
This material offers durability and reliability in various operating conditions.
The specified mounting hole size ensures easy installation on the circuit board.
This high temperature tolerance makes the connector suitable for a wide range of environments.
The connector can withstand low temperatures without compromising performance.
The thick plating ensures longevity and prevents corrosion.
This connector is specifically designed for telecom and datacom applications, ensuring reliable performance.
Phosphor bronze offers excellent conductivity and durability for long-lasting connections.
This code indicates that the connector meets stringent safety standards for flame resistance.
The high-rated current allows for efficient signal transmission.
The color-coding simplifies installation and maintenance of the connector.
Compliance with UL standards ensures quality and safety in the connector.
The ample number of contacts allows for multiple connections in a single connector.
Board mounting offers secure attachment and stability during operation.
The specified terminal pitch simplifies installation and ensures compatibility with standard boards.
Staggered contact pattern minimizes interference and crosstalk for better signal integrity.
Solder termination provides a strong and reliable connection for optimal performance.
Female contacts are commonly used for their versatility and compatibility with various devices.
Low contact resistance ensures efficient signal transmission with minimal loss.
The jack style offers easy insertion and removal of the connector with a secure fit.
Right angle mounting allows for versatile installation options in tight spaces.
The modular contact style offers flexibility and compatibility with various telecom applications.
The terminal length ensures a secure connection on the board.
The locking mounting option provides additional security and stability for the connector.
The commercial reliability of the connector ensures consistent performance in various applications.
Telecom & Datacom Connectors 43860-0007 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43860-0007 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Component Housing Update 18/Dec/2014
PCN Assembly/Origin - Mult Devs Tool Duplication 11/Mar/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Sensitron Semiconductor
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
B340A-13-F
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
HDR-E50MSG1+
Honda Tsushin Kogyo
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
61400416021
Wuerth Elektronik & Kg
61400416021 by Wurth Elektronik is a USB connector with 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it offers high insulation resistance of 1Gohm, operates b/w -40 to 105°C temperatures, and has a durable design rated for 1500 cycles.
RJHSE-5384-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
5569380-1
TE Connectivity 5569380-1 is a Telecom & Datacom Connector with EMI shielding. It has Insulation Resistance of 500MΩ, rated for 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durable connectors with right-angle mounting options.
1734510-1
TE Connectivity's 1734510-1 USB connector features POLYBUTYLENE TEREPHTHALATE insulator, 100000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom applications, this right-angle receptacle has a rated current of 1A and operates b/w -40 to 85 °C temperatures.
100616-2
TE Connectivity's 100616-2 is a Telecom & Datacom Connector with EMI shielding, POLYBUTYLENE TEREPHTHALATE insulator, and TIN shell finish. It has 8 contacts, rated at 1.5A for signal current, suitable for board mounting applications in telecommunications and data communication systems.
UX60SC-MB-5S8(80)
Hirose Electric
The Hirose Electric UX60SC-MB-5S8(80) is a USB connector with 5 contacts, rated at 1A signal current. Featuring a dielectric voltage of 100VAC and insulation resistance of 100MΩ, it's ideal for telecom/datacom applications. With a durable design lasting up to 5000 cycles, this right-angle mount connector has a shell finish of TIN and insulator material made from synthetic resin.
61400826021
61400826021 by Wurth Elektronik is a USB connector with gold finish, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting with solderable retention clips and offers durability up to 1500 cycles.
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
RJE73-188-00441
Amphenol
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
UX60A-MB-5ST(70)
The Hirose Electric UX60A-MB-5ST(70) USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this female connector has a surface mount termination type, operates b/w -30°C to 75°C, and offers durability up to 5000 cycles.
124018612112A
Amphenol 124018612112A is a USB connector with 24 contacts, rated at 5A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm. Ideal for telecom/datacom applications, it has a waterproof option and operates b/w -40 to 85°C.
85502-5006
Molex
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body or Shell Style: JACK;
SS-32
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Additional Features: SHIELDED, MAX CONTACTS (SERIES)=10; MIL Conformity: NO;
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
SI-46001-F
Bel Fuse SI-46001-F is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel/Tin shell finish, UL 94V-0 flammability code, and copper alloy shell material. Ideal for board mounting in telecom and datacom applications.
74320-4004
Molex 74320-4004 is a Telecom & Datacom Connector with 24 contacts, UL94V-0 rated. Features include Tin (Sn) - Ni termination, 3A signal current rating, and GLASS FILLED POLYMER insulator. Ideal for commercial applications requiring right-angle mounting on boards or panels.
1-1705951-1
TE Connectivity 1-1705951-1 is a Telecom & Datacom Connector with 0.598" body length, 0.453" width, and Tin (Sn) termination finish. It has an insulation resistance of 500M ohm and operates b/w -40 to 105°C. Ideal for telecom applications requiring a durable male connector with right-angle mounting option.
MRJ-5381-013
Amphenol MRJ-5381-013 is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination. Ideal for applications requiring POLYETHYLENE insulator material, PHOSPHOR BRONZE contact material, and 8 contacts in a RECEPTACLE shell style.
V890-1AX1-A1
V890-1AX1-A1 by Bel Fuse is a telecom and datacom connector with a body length of 0.626 inch and a body width of 0.652 inch. It features a termination contact finish of TIN SILVER COPPER and an insulator material of POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE. This connector is commonly used in commercial applications for board and panel mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43860-0001
Molex 43860-0001 is a Telecom & Datacom Connector with 0.62" body length, 0.52" width, and 0.59" depth. It features Matte Tin finish, GLASS FILLED POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications in telecom and datacom systems with 8 contacts, rated at 1.5A signal current.
43860-0013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Terminal Pitch (mm): 2.032;
43860-0010
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Plating Thickness (inch): 50u; Mounting Option-1: LOCKING;
43860-0016
Molex 43860-0016 is a telecom and datacom connector with a body length of 0.645", width of 0.533", and depth of 0.62". It has an insulation resistance of 500MΩ and is commonly used in board mounting applications.
43860-0004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 8; Mixed Contacts: NO;
43860-0012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; IEC Conformity: NO;
43860-0011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; PCB Contact Pattern: STAGGERED;
43860-0017
Molex 43860-0017 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It has an insulation resistance of 500M ohm, operates b/w -40°C to 85°C, and features a nickel shell finish. Ideal for board mounting with UL certification, this female connector has 6 contacts and solder termination for commercial applications.
43860-0014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .533 inch; Termination Contact Finish: NOT APPLICABLE;
43860-0019
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; No. of Ports: 1;
43860-0025
Molex 43860-0025 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 0.533" body width. Ideal for board mounting with staggered PCB contact pattern, it operates b/w -40°C to 85°C and has UL94V-0 flammability rating.
43860-0002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Style: RIGHT ANGLE;
43860-0003
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Minimum Operating Temperature: -40 Cel;
43860-0015
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Insulator Material: GLASS FILLED POLYAMIDE;
43860-0009
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYAMIDE; Insulator Color: BLACK;
43860-0022
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Maximum Operating Temperature (Cel): 85;
43860-0023
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Rated Current - Signal: 1.5 A;
43860-0024
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .533 inch; Mounting Option-1: LOCKING;
43860-0026
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .62 inch; Body Width: .533 inch;
43860-0027
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved