Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 47654-0001 USB connector features gold termination, liquid crystal polymer insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring female contact gender in cable mounting receptacle design.
Median Price
$0.582
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Farnell
1+ parts
$0.549
100+ parts
$0.338
1k+ parts
$0.293
10k+ parts
-
Mouser Electronics
$0.840
$0.607
$0.497
$0.436
DigiKey
$0.920
$0.631
Master Electronics
Verical
$0.410
Powell Electronics
$0.413
Chip1Stop
$0.433
Element14
$0.760
Newark
$0.754
Digiode
$0.485
Nova Conductors
$0.793
TME
$0.610
IBS Electronics
$0.412
Vyrian
VNN
Connector Distribution Corp
Right Parts Inc.
Corphita
$0.460
Semicontronic
$0.741
$0.737
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$1.590
Andel Nordic
$5.284
$5.072
Eastek
Continental Prestige Electronics
$0.709
Authorized Procurement Solutions
Assy Fe
Kepictronics
Perfect Parts
Gold termination offers excellent conductivity and corrosion resistance, ensuring reliable signal transmission and durability.
Liquid Crystal Polymer insulator provides high mechanical strength, heat resistance, and low dielectric constant, ensuring stable performance in various environments.
USB connectors are widely used and provide a standardized interface for connecting devices, making this product compatible with various devices and applications.
Cable mounting allows for easy installation and connection to cables, reducing installation time and effort.
Stainless steel shell provides durability, corrosion resistance, and mechanical strength, ensuring long-lasting performance and reliability.
Female contacts are typically used for receptacles, providing a secure connection with male connectors and preventing accidental disconnections.
Receptacle design allows for easy insertion and removal of connectors, making it user-friendly and convenient for connecting devices.
Telecom & Datacom Connectors 47654-0001 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Type:
Option:
Shell Material:
47654-0001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
General Diode
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1552200168
Molex
WIRE AND CABLE;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transistor & Electronic
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SS-6488S-A-NF-1-01
Bel Fuse
Bel Fuse SS-6488S-A-NF-1-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. It has 8 contacts in 2 rows, UL 94V-0 flammability code, and SOLDER termination. Ideal for board or panel mounting in telecom applications due to its right angle mounting style and FEMALE contact gender.
3012
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
1888250-4
TE Connectivity
TE Connectivity 1888250-4 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 500M ohm insulation resistance. It features a 0.641" body length, 0.456" width, and 0.165" depth. Ideal for telecom applications requiring durable connectors with high insulation resistance.
SI-60062-F
Bel Fuse SI-60062-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 0.85" depth. Featuring 8 contacts, POLYETHYLENE insulator, and TIN SILVER COPPER finish, it operates b/w -40°C to 85°C. Ideal for board and panel mounting in telecommunications and data communication applications.
ARJM11D7-502-AB-EW2
Abracon
Abracon's ARJM11D7-502-AB-EW2 is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and features staggered PCB contact pattern. Ideal for board mounting in telecom and datacom applications.
2086588131
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
MUSB-A511-004
Amphenol
MUSB-A511-004 by Amphenol is a USB connector with a body length of 1.181", body width of 0.709", and body depth of 0.637". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1000000000 ohm, and dielectric withstand voltage of 500VAC.
09455511102
Harting Electronics & Kg
09455511102 by Harting Electronics & Kg is a Telecom & Datacom Connector with dimensions of 0.619" x 2.953" x 0.734". It features TIN OVER NICKEL termination, POLYBUTYLENE TEREPHTHALATE insulator, and COPPER ALLOY shell material. Ideal for board mounting applications in telecom and datacom systems, it has a rated current of 1.5A and operates b/w -40°C to 70°C.
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
6339191-4
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYETHYLENE; No. of Rows Loaded: 1;
6605814-6
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; Body Length: .725 inch; Minimum Operating Temperature: 0 Cel;
2301996-2
TE Connectivity's 2301996-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel finish. It has 8 contacts for board mounting at temperatures from -40 to 85°C. Ideal for telecom and datacom applications requiring right-angle mounting with solder termination.
LPJG0926HENL
Link-pp Int'l Technology
LPJG0926HENL by Link-pp Int'l Technology is a Telecom & Datacom Connector with dimensions of 0.626" x 0.528" x 0.839". It features 8 gold contacts, phosphor bronze material, and a polarized housing for secure board mounting. Ideal for telecom and datacom applications requiring right angle mounting with solder termination.
6-555174-2
Commscope
555153-1
Api Technologies
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 710VDC; Mounting Option-1: LOCKING; Termination Type: SOLDER;
SS-7188S-A-NF-50
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
SIM6050-8-0-30-00-A
Global Connector Technology
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: GOLD OVER NICKEL; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e4; Mating Contact Finish: AU ON NI;
5353928-2
TE Connectivity's 5353928-2 is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with LOCATING POST board mounting. It has a max operating temp of 85°C and -55°C min. Ideal for telecom and datacom applications, featuring COPPER ALLOY shell material, TIN finish, and UL 94V-0 flammability rating.
1050570001
Molex 1050570001 is a USB connector with a body length of 0.576 inch, body width of 0.285 inch, and insulation resistance of 1000000000 ohm. It is commonly used in telecom and datacom applications for board mounting with solderable retention clips.
RJHSE-3381-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: MATTE TIN OVER NICKEL; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
47659-1100
The Molex 47659-1100 is a Telecom & Datacom Connector with 19 contacts. It features GOLD FLASH over NICKEL termination, LIQUID CRYSTAL POLYMER insulator, and NICKEL shell finish. Ideal for board mounting in applications requiring FEMALE contact gender and STRAIGHT mounting style.
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
47659-1000
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE;
47659-1002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Body or Shell Style: RECEPTACLE; Empty Shell: NO;
47659-1010
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Total No. of Contacts: 19; Mounting Style: STRAIGHT;
47659-1011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: BRASS; Termination Type: SURFACE MOUNT; Filter Feature: NO;
47659-1012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: BRASS; Termination Contact Finish: NOT APPLICABLE; MIL Conformity: NO;
47659-1101
47659-1101 by Molex is a Telecom & Datacom Connector with 19 contacts. It features Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. Ideal for board mounting in telecom and datacom applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved