Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 47659-1000 is a Telecom & Datacom Connector with 0.591" body length, 0.264" body width, and 10000000 ohm insulation resistance. It features TIN BISMUTH termination contact finish and POLYETHYLENE insulator material. Ideal for commercial applications in telecom and datacom systems, offering reliable performance in temperatures ranging from -20 to 85 °C.
Median Price
$1.754
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Vyrian
VNN
Prism Electronics
Continental Prestige Electronics
$1.566
$1.534
Argo Parts USA
Semicontronic
$2.500
$2.438
$2.425
Aztec Data Supply Inc.
$5.997
Andel Nordic
$7.880
$5.513
AZTECH Wire
$13.093
Perfect Parts
Kepictronics
Corphita
Netroflash
$1.719
$1.666
$1.631
Cyclops Electronics Ltd (Excess)
The compact body length allows for space-saving design and easy integration into various devices.
High insulation resistance ensures reliable and stable performance, reducing the risk of signal interference or loss.
The high dielectric withstanding voltage helps in protecting the connector from voltage surges or fluctuations, increasing the durability of the product.
The TIN BISMUTH contact finish provides excellent conductivity and durability, ensuring long-lasting performance and reliability.
With a rated current of 0.5 A, this connector is suitable for handling signal transmission efficiently and effectively.
Low contact resistance helps in minimizing power loss and ensuring efficient signal transmission.
Telecom & Datacom Connectors 47659-1000 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
47659-1000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
EU2B-YS303C
Idec
ROTARY SWITCH;
Tak Cheong Electronics Holdings
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM358AN
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2-5174225-5
TE Connectivity
TE Connectivity 2-5174225-5 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.516", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for telecom/datacom applications requiring high reliability and signal current up to 1A in commercial settings.
RJE72-188-1341
Amphenol
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
RJHSE-5080-04
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
DX07S024WJ3R400
Japan Aviation Electronics Industry
DX07S024WJ3R400 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. Features gold over nickel termination, polyethylene insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring surface mount board mounting of female connectors.
43202-4101
Molex
The Molex 43202-4101 is a telecom & datacom connector with 0.44" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecommunications equipment due to its durable brass shell, right-angle mounting style, and female contact gender.
1-292303-1
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
USB-A-S-RA-TSMT
Adam Tech
USB-A-S-RA-TSMT by Adam Tech is a telecom/datacom connector with 4 contacts, rated at 1A signal current. It features right-angle mounting, surface mount termination, and a polarization key for easy connection. Ideal for commercial applications requiring a reliable USB connector with gold over nickel mating contact finish.
1888653-3
TE Connectivity 1888653-3 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and tin termination. It has 8 contacts, rated at 1.5A signal current, suitable for board and panel mounting in commercial applications.
SI-16001-F
Bel Fuse
Bel Fuse SI-16001-F is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and NICKEL/TIN shell finish. It features SPLIT BOARD LOCK mounting option for PCB contact row spacing of 2.54mm. Ideal for board mounting applications in telecommunications and data communication systems.
85502-5006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body or Shell Style: JACK;
PX0844/B/0M50/B
Bulgin
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
2007637-7
TE Connectivity's 2007637-7 is a Telecom & Datacom Connector with 80 contacts, operating b/w -55 to 105°C. It features press fit termination, UL94V-0 flammability rating, and is suitable for board mounting applications.
USB4085-GF-A
Global Connector Technology
USB4085-GF-A by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable stainless steel shell and operates b/w -40°C to 85°C.
P128
Lumberg Connect
P128 by Lumberg Connect is a Telecom & Datacom Connector with gold termination, brass contacts, and polycarbonate shell. It has 6 contacts, rated for 2A signal current, and operates b/w -40 to 125°C. Ideal for commercial telecom applications due to its durability of 2000 cycles and UL reference standard compliance.
ARJM11C7-009-AB-EW2
Abracon
ARJM11C7-009-AB-EW2 by Abracon is a Telecom & Datacom Connector with gold termination, 8 contacts, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and features staggered PCB contact pattern. Ideal for board mounting in telecom applications.
GSB316441CEU
Amphenol GSB316441CEU is a USB connector with 9 contacts, made of stainless steel shell and polyethylene insulator. It has a dielectric voltage of 1000VAC, operating temperature range from -20 to 60°C, and durability of 1500 cycles. Ideal for telecom & datacom applications requiring a right-angle mounting on boards.
SI-50154-F
Bel Fuse SI-50154-F is a Telecom & Datacom Connector with 0.708" x 0.599" x 1" dimensions. Featuring 8 contacts, POLYETHYLENE insulator, and NICKEL/TIN finish, it's ideal for board and panel mounting in telecommunications applications. The connector has a polarization key, solder termination type, and right-angle mounting style for secure connections.
RJSSE-5380
RJSSE-5380 by Amphenol is a Telecom & Datacom Connector with dimensions of 0.65" x 0.525" x 0.62". It has an Insulation Resistance of 500M ohm, Dielectric Withstanding Voltage of 1500VAC, and Contact Material made of Phosphor Bronze. Ideal for board mounting in telecom applications, it offers reliable performance with a rated current of 1.5A and operating temperatures from -20°C to 85°C.
SS-6488S-A-NF-K1
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
2007492-7
TE Connectivity's 2007492-7 is a Telecom & Datacom Connector with -55 to 105°C operating range. Features include 40 contacts, press fit termination, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
47659-1100
The Molex 47659-1100 is a Telecom & Datacom Connector with 19 contacts. It features GOLD FLASH over NICKEL termination, LIQUID CRYSTAL POLYMER insulator, and NICKEL shell finish. Ideal for board mounting in applications requiring FEMALE contact gender and STRAIGHT mounting style.
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
47654-0001
Molex 47654-0001 USB connector features gold termination, liquid crystal polymer insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring female contact gender in cable mounting receptacle design.
47659-1002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Body or Shell Style: RECEPTACLE; Empty Shell: NO;
47659-1001
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved