Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5406721-1 is a Telecom & Datacom Connector with 0.669" body length, 0.488" width, and Matte Tin finish. It features POLYETHYLENE insulator, POLYPHENYLENE SULFIDE shell material, and 8 contacts for board mounting applications.
Median Price
$1.573
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.833
100+ parts
$0.636
1k+ parts
$0.585
10k+ parts
$0.560
Element14
$1.446
$1.163
$0.999
$0.909
TE Connectivity
$1.700
$1.180
$1.080
-
Mouser Electronics
$1.810
$1.310
$1.140
$0.978
Newark
$2.000
$1.500
$1.380
DigiKey
$2.080
$1.499
$1.405
Farnell
$2.142
$1.467
$0.994
$0.975
Powell Electronics
$3.339
$2.062
Adafruit Industries
$7.190
$6.543
$5.896
Future Electronics
$0.790
$0.760
TTI Europe
$0.896
$0.819
Master Electronics
$0.873
Verical
$1.110
$0.950
Arrow
$1.097
$1.018
Nova Conductors
$1.087
Digiode
$1.374
TME
$1.860
$1.290
$0.880
NAC Semi
$1.580
Vyrian
VNN
Rapid Electronics
$1.252
IBS Electronics
$1.253
$1.070
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Semicontronic
$0.670
$0.653
$0.650
Continental Prestige Electronics
$0.945
$0.743
$0.602
Netroflash
$1.032
$1.011
Argo Parts USA
Corphita
$1.301
Advanced Electronics
Aztec Data Supply Inc.
$8.758
Perfect Parts
Assy Fe
Futuretech Components
Abacus Technologies
Authorized Procurement Solutions
Eastek
The compact body length helps in saving space and making the connector suitable for applications with limited space.
High insulation resistance ensures reliable and stable connections, reducing the risk of signal interference or loss.
The termination contact finish provides good conductivity and corrosion resistance, ensuring long-lasting performance.
UL 94V-0 flammability rating indicates that the connector is highly flame retardant, making it safe for use in various environments.
Having multiple contacts allows for the transmission of more signals, making the connector suitable for complex telecom and datacom applications.
The versatile mounting type offers flexibility in installation options, making it convenient for different setups and configurations.
The use of polypenylene sulfide as shell material provides durability and thermal resistance, ensuring the connector can withstand harsh conditions.
The telecom and modular contact style allows for quick and easy connections, improving efficiency and convenience during installation.
Telecom & Datacom Connectors 5406721-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5406721-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Packaging - Packaging color chg 18/JUL/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
2170409-5
TE Connectivity's 2170409-5 is a Telecom & Datacom Connector with -55 to 105°C operating temp, UL 94V-0 flammability rating, and 40 contacts. It features press-fit termination, board mounting, and suits applications requiring a two-port connector for telecom and datacom systems.
1734366-2
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Style: USB2.0 A; Terminal Pitch (mm): 2;
629105136821
Wuerth Elektronik & Kg
629105136821 USB connector by Wurth Elektronik features a body length of 0.315", insulation resistance of 1G ohm, and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a liquid crystal polymer insulator, gold termination finish, and operates b/w -40 to 105°C.
UX60SA-MB-5ST(80)
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UX60SA-MB-5ST(80);
SI-46001-F
Bel Fuse
Bel Fuse SI-46001-F is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel/Tin shell finish, UL 94V-0 flammability code, and copper alloy shell material. Ideal for board mounting in telecom and datacom applications.
RJHSE-5080-A2
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
USB-AM-S-F-B-TH-R
Samtec
Samtec's USB-AM-S-F-B-TH-R is a 4-contact USB connector with Tin-Nickel finish, PBT insulator, and steel shell. Ideal for board mounting in telecom/datacom applications due to its right-angle male contact design and UL 94V-0 flammability rating.
651005136421
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
924
Keystone Electronics
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Body or Shell Style: SOCKET;
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
MUSBR-4193-M0
MUSBR-4193-M0 by Amphenol is a USB connector with 4+4 contacts, rated at 1.8A signal current. It features high temp thermoplastic insulation, zinc alloy shell material, and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring durable, polarized connectors with UL certification.
3012
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
5173279-3
TE Connectivity 5173279-3 is a Telecom & Datacom Connector with 50 contacts, 1A signal rating, and 0.05" mating contact pitch. Ideal for board mounting applications in telecom and datacom systems due to its high insulation resistance of 500MOhm and operating temperature range from -55°C to 105°C.
09454521910
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
MP1010RX-1000K
Kycon
Kycon's MP1010RX-1000K is a Telecom & Datacom Connector with 10 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500M ohm, and contact material made of copper alloy. Ideal for wire and stranded cable connections in commercial applications with operating temperatures ranging from -55 to 85°C.
SS-6466-NF-A431
Bel Fuse's SS-6466-NF-A431 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY contacts, and 30u plating thickness. It has 6 contacts, rated at 1.5A for signal current, UL94V-0 flammability code. Ideal for board mounting in telecom and datacom applications due to its right-angle mounting style and staggered PCB contact pattern.
74320-3000
Molex
The Molex 74320-3000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and glass-filled polymer insulator. It operates b/w -20°C to 85°C, ideal for commercial applications requiring high insulation resistance and female contact gender.
ZX62D-B-5P8(30)
The Hirose Electric ZX62D-B-5P8(30) USB connector has gold termination finish, 5 contacts, and rated current of 1.8A. With operating temperatures from -30 to 85°C, it is ideal for telecom & datacom applications requiring a male surface mount USB 2.0 connector with right angle mounting and locking option.
7499010121A
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5406721-2
TE Connectivity's 5406721-2 is a telecom and datacom connector with a body length of 0.669 inch, insulation resistance of 500000000 ohm, and a body width of 0.488 inch. It is used for board and panel mounting in applications requiring a durable, right angle jack connector.
5406299-1
TE Connectivity 5406299-1 is a Telecom & Datacom Connector with EMI shielding, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts. It has a body size of 0.7" x 0.57" x 0.54", rated for 1.5A signal current, and suitable for board and panel mounting in telecom applications.
5406566-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Manufacturer Series: 5406566; Body or Shell Style: JACK;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL;
5406552-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mixed Contacts: NO; No. of Ports: 4;
TE Connectivity 5406552-1 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 50u TIN plating. It has 8 contacts, rated for 1.5A signal current, suitable for telecom applications requiring durability and reliability in commercial settings.
5406562-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL;
5406533-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Rated Current - Signal: 1.5 A;
5406216-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
5406275-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: YES; Reference Standard: UL;
5406296-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulation Resistance: 500000000 ohm;
5406721-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Pitch (mm): 1.02; Additional Features: LOW PROFILE; Plating Thickness (inch): 30u;
5406217-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
5406526-1
TE Connectivity's 5406526-1 is a Telecom & Datacom Connector with Polyethylene insulator, rated for -40 to 85°C. Featuring 8 contacts, it has a plating thickness of 50u and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
5406566-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Manufacturer Series: 5406566;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85;
5406903-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulation Resistance: 500000000 ohm;
5406281-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Finish: TIN; DIN Conformance: NO; Terminal Pitch (mm): 1.02;
5406298-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
5406721-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved