Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 2301994-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and operates b/w -40°C to 85°C. Ideal for telecommunications and data communication applications requiring secure board mounting.
Median Price
$5.550
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$8.210
100+ parts
$5.740
1k+ parts
$5.240
10k+ parts
-
DigiKey
$8.450
TE Connectivity
$16.240
$14.080
$13.530
Element14
$586.480
$566.310
Arrow
$3.426
Chip1Stop
$5.140
Verical
$5.060
Farnell
$4.420
Powell Electronics
$5.090
Nova Conductors
$4.919
Digiode
$6.926
VNN
Vyrian
Rapid Electronics
IBS Electronics
$4.950
TME
$6.880
$6.490
Continental Prestige Electronics
$2.620
Semicontronic
$2.910
$2.837
$2.823
Advanced Electronics
$4.794
Aranea Global
$4.821
$4.628
Aztec Data Supply Inc.
$5.927
Corphita
$6.561
Argo Parts USA
Glotronic Ltd.
Assy Fe
Perfect Parts
The compact body length of 0.627 inch makes this connector suitable for applications where space is limited.
The EMI shielding helps prevent electromagnetic interference, ensuring reliable data transmission.
Liquid crystal polymer insulator offers high durability and temperature resistance, making the connector suitable for various environments.
The 30u plating thickness provides excellent corrosion resistance and signal conductivity.
Specifically designed for telecom and datacom applications, ensuring compatibility and optimized performance.
Board mounting option with locking feature ensures secure and stable connection to the PCB.
With 8 contacts, this connector allows for multiple data or signal transmission, increasing versatility.
Solder termination provides a reliable and durable connection for long-term use.
Telecom & Datacom Connectors 2301994-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2301994-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Drawings Document Clarification 08/Sep/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
RJHSE-3381-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: MATTE TIN OVER NICKEL; DIN Conformance: NO;
57-30500
Amphenol
Amphenol 57-30500 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 2 rows. It has a dielectric voltage of 700VDC, gold termination finish, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission in telecom and datacom systems.
6339191-4
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYETHYLENE; No. of Rows Loaded: 1;
PX0844/B/0M50/B
Bulgin
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
1051640001
Molex
Molex 1051640001 USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications requiring surface mount board mounting in a right angle receptacle design. Stainless steel shell with matte tin finish ensures durability and reliability.
292336-1
TE Connectivity's 292336-1 USB connector features matte tin finish, polyethylene insulator, and copper alloy contacts. With a rated current of 1A, it is ideal for telecom & datacom applications requiring high durability and reliability in temperatures ranging from -55 to 85°C.
2169890001
The Molex 2169890001 USB connector has a body size of 0.148" x 0.352" x 0.573", with gold termination finish. It is a right angle receptacle type, suitable for telecom & datacom applications. With UL 94V-0 flammability rating and 10000 cycle durability, it offers reliable performance in temperatures ranging from -40°C to 85°C.
6-569530-2
Commscope
6-569530-2 by Commscope is a Telecom & Datacom Connector with Glass Filled Polycarbonate insulator, Nickel shell finish, and Copper Alloy shell material. It has 8 contacts and is a male plug type connector suitable for cable mounting applications.
USB3106-30-0230-A
Global Connector Technology
USB3106-30-0230-A by Global Connector Technology is a USB connector with 5 contacts, rated current of 1A, and insulation resistance of 1GΩ. It is commonly used in telecom and datacom applications for board mounting with a straight shell style.
292304-3
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 1 A; Body Depth: .619 inch; Body Length: .474 inch;
HDR-E50MSG1+
Honda Tsushin Kogyo
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
5520425-3
TE Connectivity 5520425-3 is a Telecom & Datacom Connector with 0.535" body length, 0.63" width, and 0.65" depth. It has an insulation resistance of 500MΩ and uses POLYBUTYLENE TEREPHTHALATE insulator material. This connector is ideal for telecom and datacom applications requiring a durable, straight-mounting female jack with solder termination.
09454521910
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
54601908WPLF
Amphenol's 54601908WPLF is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a matte tin over nickel finish, UL-rated durability of 250 cycles, and a right-angle mounting style.
09455451564
09455451564 connector by Harting Electronics & Kg is a Telecom & Datacom Connector with dimensions of 0.614" x 0.639" x 1.614". It has a rated current of 1.5A, UL reference standard, and durability of 750 cycles. Ideal for telecom and datacom applications requiring a female jack connector with IDC termination and straight mounting style.
UE86-3G8620-60361
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86;
2007492-7
TE Connectivity's 2007492-7 is a Telecom & Datacom Connector with -55 to 105°C operating range. Features include 40 contacts, press fit termination, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
RJHSE-5384-04
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; PCB Contact Pattern: STAGGERED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2301994-7
TE Connectivity 2301994-7 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, board lock mounting option, and brass shell material. Ideal for telecom applications due to its right angle mounting style and female contact gender.
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
2301994-5
TE Connectivity 2301994-5 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and features right-angle mounting for board lock applications.
2301994-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .544 inch; Insulator Material: LIQUID CRYSTAL POLYMER;
2301994-3
TE Connectivity's 2301994-3 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and nickel shell finish. It has 8 contacts, right-angle mounting style, and solder termination. Ideal for telecom and datacom applications requiring secure board locking and polarized housing.
2301995-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL; Total No. of Contacts: 8;
2301996-6
TE Connectivity's 2301996-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
2301996-3
TE Connectivity 2301996-3 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and board lock mounting. It operates b/w -40°C to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring right-angle board mounting.
2301995-1
TE Connectivity 2301995-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and board lock mounting. It operates b/w -40 to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring reliable connectivity in harsh environments.
2301996-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Minimum Operating Temperature: -40 Cel;
2301996-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body Depth: .531 inch; Shell Material: BRASS; Filter Feature: NO;
2301996-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel; Insulator Material: LIQUID CRYSTAL POLYMER; Board Mounting Option: BOARD LOCK;
2301995-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85; Contact Material: NOT SPECIFIED;
2301994-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Total No. of Contacts: 8; Board Mounting Option: BOARD LOCK; UL Flammability Code: 94V-0;
2301994-9
TE Connectivity 2301994-9 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It operates b/w -40°C to 85°C, suitable for board mounting applications requiring solder termination. With UL certification and 8 contacts, it's ideal for telecom and datacom systems needing high reliability in harsh environments.
2301997-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Mains Connector Rating: 115/230VAC; Reference Standard: UL;
2301997-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Finish: NICKEL; Board Mounting Option: BOARD LOCK; Termination Contact Finish: NOT APPLICABLE;
2301994-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; Mains Connector Rating: 115/230VAC;
2301996-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Filter Feature: NO; Mounting Type: BOARD; Shell Material: BRASS;
2301997-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Reference Standard: UL; Maximum Operating Temperature (Cel): 85;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved