Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 74320-1000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and 1.45" body length. It has an insulation resistance of 1Gohm, operates b/w -20°C to 85°C, and features a glass-filled polymer insulator. Ideal for commercial applications requiring reliable signal currents up to 3A in telecommunications and data communication systems.
Median Price
$3.244
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Avnet
1+ parts
$1.732
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.960
Adafruit Industries
$3.395
$3.225
Mouser Electronics
$4.560
$4.040
$3.580
RS Americas
$5.920
$4.260
$3.320
DigiKey
$6.160
Element14
$358.290
$296.150
TTI
Farnell
$3.280
Verical
$2.851
Powell Electronics
$2.920
$2.760
$2.510
Master Electronics
$3.720
$3.030
$2.480
Sager
$2.450
Distrelec
TTI Europe
$3.003
$2.883
Heilind Electronics
$2.991
Interstate Connecting
$2.899
Digiode
$2.177
Greenchips
$2.675
$2.547
$2.426
$2.189
Nova Conductors
$3.160
TME
$5.950
$4.620
$4.520
VNN
NAC Semi
$5.580
$5.160
Jameco Electronics
Vyrian
Rutronik
$4.700
IBS Electronics
$3.254
$3.071
$2.384
Martec Srl
EMSNET
LIBRA Elektronik GmbH
Bristol Electronics
SIE Connect GmbH - GreenChips
Dan-Mar Components
Semi Source
J2 Sourcing AB
SPM Sales
Pegasus Components GmbH
Inland Empire Components Inc.
R&J Components
Prism Electronics
ComSIT Distribution GmbH
Contempo Components LLC
Andel Nordic
$0.268
$0.257
Corphita
$2.063
Semicontronic
$2.080
$2.028
$2.018
Argo Parts USA
Advanced Electronics
Continental Prestige Electronics
$4.400
$3.110
$2.520
Aztec Data Supply Inc.
$10.267
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Abacus Technologies
GreenTree Electronics
Netroflash
$3.097
$3.002
$2.939
EMSNET (Excess)
Assy Fe
Futuretech Components
Eastek
RTC Component Inc.
The small mating contact pitch allows for a high density of connections, making this product suitable for applications where space is limited.
High insulation resistance ensures reliable and stable electrical connections, reducing the risk of signal interference or losses.
The high dielectric voltage withstand capability ensures the connectors can handle high voltage applications safely.
Specifically designed for telecom and datacom applications, ensuring compatibility and reliable performance in those industries.
The right angle mounting style provides flexibility in installation and allows for connections to be made in tight spaces.
The square pin/socket contact style ensures a secure and stable connection, reducing the risk of signal loss or disruption.
With a high number of contacts, this connector can support complex and multi-channel communication systems, making it versatile for various applications.
The high rated current capacity allows for the transmission of high-speed signals and power, making it suitable for datacom applications.
Telecom & Datacom Connectors 74320-1000 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
74320-1000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Plating 16/Aug/20106
PCN Assembly/Origin - 074320y0yy Alt Material Supplier 27/Jul/2022
PCN Other - 74320 Series Material 23/Mar/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Won-top Electronics
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
6-569550-3
Commscope
The Commscope 6-569550-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator and shell material. It features 8 contacts, IDC termination type, and UL Flammability Code 1863. Ideal for cable mounting applications requiring male plug connectors in telecom and datacom systems.
67329-8020
Molex
Molex 67329-8020 USB connector features 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, with glass-filled polyamide insulator material and solder termination type. Offers durability of 1500 cycles and rated current of 1A for commercial reliability.
2086581051
Molex 2086581051 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Featuring 19 contacts, it has a body size of 0.59" x 0.244" x 0.478". Ideal for board and panel mounting applications, it offers a max operating temperature of 85°C and durability of 10k cycles.
HDRA-E68W2LFDT1EC-SL+
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
1-2007562-5
TE Connectivity 1-2007562-5 is a Telecom & Datacom Connector with 12 ports and 240 contacts. It operates b/w -55°C to 105°C, meeting UL flammability code 94V-0. Ideal for board mounting, it features press fit termination and suits applications requiring high-density connectivity.
RJE1R-288-236402
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
67503-1230
The Molex 67503-1230 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a durable design with GLASS FILLED NYLON insulator material and TIN termination finish. With a total of 5 contacts, this right-angle receptacle has a surface mount termination type and is rated for commercial reliability.
95503-2884
Molex 95503-2884 is a Telecom & Datacom Connector with TIN finish, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and COPPER ALLOY contacts. It has 8 contacts, FEMALE gender, and JACK body style for BOARD mounting via SURFACE MOUNT. Ideal for telecom and datacom applications requiring reliable connectivity in compact spaces.
124019772112A
USB CONNECTOR;
USB-A-S-RA-TSMT
Adam Tech
USB-A-S-RA-TSMT by Adam Tech is a telecom/datacom connector with 4 contacts, rated at 1A signal current. It features right-angle mounting, surface mount termination, and a polarization key for easy connection. Ideal for commercial applications requiring a reliable USB connector with gold over nickel mating contact finish.
SS60000-009G
Bel Fuse
Bel Fuse SS60000-009G is a Telecom & Datacom Connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and 8 FEMALE contacts. It features SPLIT BOARD LOCK mounting option for 2 PCB rows spaced at 2.03mm. Ideal for applications requiring TELCOM, MODULAR connectors in RIGHT ANGLE mounting style with POLARIZED HOUSING and COPPER ALLOY shell material.
632723300011
Wuerth Elektronik & Kg
632723300011 by Wurth Elektronik is a USB connector with 24 contacts, gold-plated brass material, and black insulator. It has a durability of 10000 cycles and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring a right-angle board mounting option with locating posts.
215877-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Contact Style: TELCOM, MODULAR; IEC Conformity: NO;
5520260-4
TE Connectivity 5520260-4 is a Telecom & Datacom Connector with 0.715" body length, 0.655" width, and 0.65" depth. Insulation resistance of 500MΩ makes it ideal for telecom applications. Featuring PBT-POLYESTER insulator material, UL 94V-0 flammability code, and rated current of 1.5A.
RJHSE-5080-08
Amphenol
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
500254-1931
The Molex 500254-1931 is a telecom/datacom connector with 0.591" body length, 0.632" width, and 0.478" depth. It offers 100000000 ohm insulation resistance and 500VAC dielectric voltage withstand. Ideal for board mounting with solderable retention clips, it has a rated current of 0.5A and operates b/w -20 to 85°C.
J00-0045NL
Pulse Electronics
J00-0045NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts. Featuring Matte Tin (Sn) finish, it has a 0.64" body length and 0.545" width. Ideal for board and panel mounting in telecom and datacom applications due to its POLYETHYLENE insulator material and right angle mounting style.
549-6
Regal Electronics
Regal Electronics' 549-6 is a Telecom & Datacom Connector with POLYBUTYLENE TEREPHTHALATE insulator. It features 4 ports, 24 contacts, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring solder termination, this female jack connector offers reliable connectivity in telecom and datacom systems.
48391-0003
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
MP1010RX-1000
Kycon
Kycon's MP1010RX-1000 is a telecom & datacom connector with 1010 contacts. It features gold flash termination, copper alloy contacts, and polycarbonate insulator material. Ideal for commercial applications, it has a dielectric voltage of 1400VAC and operates b/w -55 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74320-4004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER;
74320-3000
The Molex 74320-3000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and glass-filled polymer insulator. It operates b/w -20°C to 85°C, ideal for commercial applications requiring high insulation resistance and female contact gender.
74320-1004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VDC; Maximum Operating Temperature (Cel): 85;
74320-4000
The Molex 74320-4000 is a telecom and datacom connector with a body length of 0.145", body width of 0.39", and body depth of 0.454". It is used for board and panel mounting in commercial applications, with a rated current of 3A and an operating temperature range from -20°C to 85°C.
74320-1003
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Width: .39 inch;
74320-9004
Molex 74320-9004 is a telecom/datacom connector with 24 contacts, 0.075" pitch, and 1.45" body length. It has an insulation resistance of 1Gohm and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels.
74320-9014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: SOLDER;
74320-3004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 20 mohm; Mounting Type: BOARD AND PANEL;
74320-9010
The Molex 74320-9010 is a telecom and datacom connector with a body length of 1.45", body width of 0.39", and body depth of 0.454". It has an insulation resistance of 1,000,000,000 ohm and is commonly used in commercial applications for board and panel mounting.
74320-1007
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; DIN Conformance: NO;
74323-2103
The Molex 74323-2103 is a Telecom & Datacom Connector with 24 contacts, 0.075" mating pitch, and 1.45" body length. It features tin termination finish, operates b/w -20°C to 85°C, and has an insulation resistance of 1 Gohm. Ideal for commercial applications requiring reliable signal transmission on PCBs.
74320-5004
The Molex 74320-5004 is a Telecom & Datacom Connector with 24 contacts, Liquid Crystal Polymer insulator, and Tin (Sn) finish. It has a mating contact pitch of 0.075", suitable for board and panel mounting applications. With a rated current of 3A, it offers reliable performance in commercial settings at temperatures ranging from -20 to 85°C.
74323-2003
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Color: BLACK; Mounting Option-1: LOCKING;
74320-1008
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Contact Pitch (inch): 0.075;
74320-1009
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Style: SQ PIN-SKT;
74320-1001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Length: 1.45 inch;
74320-1005
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Shell Material: STEEL;
74320-1006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Filter Feature: NO;
74320-1010
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Pattern: RECTANGULAR;
74320-1011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Additional Features: WITH TRAY PACKAGING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved