Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 74323-2103 is a Telecom & Datacom Connector with 24 contacts, 0.075" mating pitch, and 1.45" body length. It features tin termination finish, operates b/w -20°C to 85°C, and has an insulation resistance of 1 Gohm. Ideal for commercial applications requiring reliable signal transmission on PCBs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Nova Conductors
Andel Nordic
$0.282
$0.271
AZTECH Wire
$12.406
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
The close mating contact pitch allows for a secure connection, ensuring reliable communication.
The extended body length provides ample space for the contacts, reducing the risk of interference.
The high insulation resistance helps to prevent signal interference and maintain signal integrity.
The compact body width allows for efficient use of space in installations with limited room.
The use of tin as the contact finish ensures good conductivity and corrosion resistance.
The shallow body depth makes it easier to fit the connector into tight spaces.
The sturdy plastic insulator material provides durability and electrical insulation.
Having three loaded rows increases the connector's capacity for connections, making it versatile.
The high maximum operating temperature ensures the connector can withstand heat in various environments.
The standard PCB contact row spacing allows for compatibility with a wide range of circuit boards.
The low minimum operating temperature ensures the connector remains functional in cold conditions.
The flash plating thickness provides a thin yet durable layer of protection for the connector.
With three PCB rows, this connector offers sufficient connections for complex circuit designs.
The specific connector type is designed to meet the needs of telecom and datacom applications.
The UL 94V-0 flammability code indicates that the connector has high flame-retardant properties.
The 3A signal rating ensures the connector can handle moderate levels of current for signal transmission.
The black insulator color gives the connector a sleek and professional appearance.
Being UL listed means that the connector meets stringent safety and quality standards.
With 24 contacts, this connector offers ample connectivity options for various applications.
The board mounting type allows for easy installation and secure attachment to circuit boards.
The steel shell material provides durability and protection for the internal components.
The specific terminal pitch ensures compatibility with standardized spacing requirements.
The rectangular PCB contact pattern is common and widely used, ensuring compatibility with many devices.
The solder termination type ensures a strong and reliable connection between the terminal and the PCB.
The specified minimum withdrawal force indicates the connector's ability to stay securely in place.
The male contact gender allows for easy and secure connections with female connectors.
The low contact resistance helps to minimize signal loss and maintain efficient communication.
The plug-style body or shell design allows for easy insertion and removal of the connector.
The straight mounting style ensures simple and secure installation on the PCB.
The specified maximum insertion force indicates the connector's ability to be securely attached to the PCB.
The specific terminal length ensures proper contact with the PCB for reliable signal transmission.
The locking mounting option provides added security, preventing accidental disconnection.
The commercial reliability of this connector ensures consistent performance and durability for commercial applications.
Telecom & Datacom Connectors 74323-2103 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
74323-2103 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Transys Electronics
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
General Instrument
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2171800001
Molex
TELECOM AND DATACOM CONNECTOR;
08211X1T43-F
Bel Fuse
Bel Fuse 08211X1T43-F is a Telecom & Datacom Connector with Tin (Sn) termination, Polybutylene Terephthalate insulator, and Nickel shell finish. It has 8 contacts for board and panel mounting in right angle style. Ideal for applications requiring UL94V-0 flammability code compliance.
67068-9000
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
USB4155-03-C
Global Connector Technology
USB4155-03-C by Global Connector Technology is a USB connector with 24 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and operates b/w -30 to 85°C. Ideal for telecom & datacom applications due to its durability of 10k cycles and UL flammability rating of 94V-0.
5-2337992-5
TE Connectivity
TE Connectivity 5-2337992-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40°C to 85°C, and mounts on a board lock for right-angle installation.
RJHSE-5E80
Amphenol Communications Solutions
09454521921
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1747981-1
TE Connectivity's 1747981-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY shell, and FEMALE contact gender. It has 19 contacts, rated for 0.5A signal current, and designed for surface mount termination in commercial applications.
JXD1-0025NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
449150011
Molex 449150011 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYCARBONATE insulator material, UL94V-0 flammability rating, and supports 8 contacts with wire sizes ranging from 22 to 28 AWG.
48037-2200
The Molex 48037-2200 USB connector features gold termination, glass-filled polyamide46 insulator, and brass contact material. Ideal for telecom & datacom applications, it offers a rated current of 1.5A, durability of 1500 cycles, and operates b/w -20 to 85°C.
48391-0003
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
73725-0110BLF
Amphenol 73725-0110BLF USB connector has 0.584" body width, 0.776" depth, and 4 contacts. Ideal for telecom/datacom applications with POLYETHYLENE insulator material and TIN shell finish. Features right angle mounting style, solder termination type, and UL 94V-0 flammability code.
ECF504-SC5E-MINI
L-com
857931006
Molex 857931006 is a Telecom & Datacom Connector with 0.661" body length, 500M ohm insulation resistance, and tin termination finish. Ideal for telecom applications, it features a black insulator, staggered PCB contact pattern, and right-angle mounting style for durability up to 750 cycles.
5406299-1
TE Connectivity 5406299-1 is a Telecom & Datacom Connector with EMI shielding, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts. It has a body size of 0.7" x 0.57" x 0.54", rated for 1.5A signal current, and suitable for board and panel mounting in telecom applications.
2108877-1
The TE Connectivity 2108877-1 USB Connector features gold termination with nickel barrier, polyethylene insulator material, and a max operating temperature of 85°C. Ideal for telecom & datacom applications, this connector has a total of 5 contacts, is rated at 1.8A for signal current, and offers durability up to 10000 cycles.
MUSBR-M5C1-30
MUSBR-M5C1-30 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a zinc alloy shell, matte tin finish, and polyethylene insulator for durability. Suitable for telecom & datacom applications with operating temperatures from -40 to 105°C.
87520-0010ALF
The Amphenol Communications Solutions 87520-0010ALF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a solder termination type and is rated for 1500 cycles durability.
UE86-3G4420-60361
Amphenol
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86-3G4420;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74320-4004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SOLDER;
74320-3000
The Molex 74320-3000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and glass-filled polymer insulator. It operates b/w -20°C to 85°C, ideal for commercial applications requiring high insulation resistance and female contact gender.
74320-1004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VDC; Maximum Operating Temperature (Cel): 85;
74320-1000
The Molex 74320-1000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and 1.45" body length. It has an insulation resistance of 1Gohm, operates b/w -20°C to 85°C, and features a glass-filled polymer insulator. Ideal for commercial applications requiring reliable signal currents up to 3A in telecommunications and data communication systems.
74320-4000
The Molex 74320-4000 is a telecom and datacom connector with a body length of 0.145", body width of 0.39", and body depth of 0.454". It is used for board and panel mounting in commercial applications, with a rated current of 3A and an operating temperature range from -20°C to 85°C.
74320-1003
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Width: .39 inch;
74320-9004
Molex 74320-9004 is a telecom/datacom connector with 24 contacts, 0.075" pitch, and 1.45" body length. It has an insulation resistance of 1Gohm and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels.
74320-9014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: SOLDER;
74320-3004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Resistance: 20 mohm; Mounting Type: BOARD AND PANEL;
74320-9010
The Molex 74320-9010 is a telecom and datacom connector with a body length of 1.45", body width of 0.39", and body depth of 0.454". It has an insulation resistance of 1,000,000,000 ohm and is commonly used in commercial applications for board and panel mounting.
74320-1007
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; DIN Conformance: NO;
74320-5004
The Molex 74320-5004 is a Telecom & Datacom Connector with 24 contacts, Liquid Crystal Polymer insulator, and Tin (Sn) finish. It has a mating contact pitch of 0.075", suitable for board and panel mounting applications. With a rated current of 3A, it offers reliable performance in commercial settings at temperatures ranging from -20 to 85°C.
74323-2003
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Color: BLACK; Mounting Option-1: LOCKING;
74323-2112
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; UL Flammability Code: 94V-0;
74323-2133
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: TIN; MIL Conformity: NO;
74323-2001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Rows Loaded: 3; Mounting Style: STRAIGHT;
74323-2004
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Pattern: RECTANGULAR;
74323-2011
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; JESD-609 Code: e3; Additional Features: SHIELDED;
74323-2012
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Insulator Material: GLASS FILLED POLYETHYLENE;
74323-2031
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; No. of Rows Loaded: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved