Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol RJSAE-5380-02 is a telecom & datacom connector with 2 ports, 8+8 contacts. Featuring POLYETHYLENE insulator, PHOSPHOR BRONZE contact material, and COPPER ALLOY shell material. Ideal for board mounting with right angle mounting style and solder termination.
Median Price
$4.145
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.940
100+ parts
$2.870
1k+ parts
$2.640
10k+ parts
-
Arrow
$3.038
Mouser Electronics
$4.820
$4.300
$4.040
Heilind Electronics
$5.119
$4.128
$3.999
Interstate Connecting
$5.226
$4.342
$4.090
DigiKey
$6.280
$4.654
$4.037
$3.615
TTI
$3.410
$3.280
Verical
Avnet
$3.613
$3.443
TTI Europe
$3.253
Master Electronics
$3.860
$3.150
Farnell
$6.110
Powell Electronics
$4.430
$4.210
Future Electronics
$3.700
$3.400
Newark
$5.410
Nova Conductors
$3.240
Rutronik
$4.580
$4.170
Vyrian
NAC Semi
$6.850
$6.320
Bas Electronics GmbH & Co. KG
Electro Sonic
$4.050
$3.560
$3.300
ComSIT USA
IBS Electronics
$5.363
ComSIT Distribution GmbH
Rapid Electronics
$5.040
Inventory MP
Bristol Electronics
R&J Components
American Connector Supply Corp
TME
$5.496
NPI Materials, Inc.
Ampacity Inc.
$2.250
Bastille Electronics
$3.078
$2.924
$2.884
Gateway Technologies
$2.883
Argo Parts USA
Continental Prestige Electronics
$3.175
Singapore Electronics
$3.564
$3.314
$3.171
$3.029
GreenTree Electronics
Perfect Parts
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Abacus Technologies
Eastek
The compact body length of this connector makes it ideal for applications where space is limited, allowing for efficient use of board space.
The wide body width provides a sturdy and stable construction, ensuring durability and reliability in harsh operating conditions.
The deep body depth allows for secure connections and helps prevent accidental disconnections, making it a reliable choice for telecom and datacom applications.
The use of polyethylene as insulator material offers excellent electrical insulation properties, ensuring signal integrity and reducing interference.
The PEG board mounting option provides a secure and stable connection to the circuit board, ensuring reliability in high vibration environments.
The 50u plating thickness offers superior corrosion resistance and longevity, making this connector a durable and cost-effective option for long-term use.
The tin shell finish provides a sleek and professional appearance, as well as enhanced conductivity for optimal performance in telecom and datacom applications.
Telecom & Datacom Connectors RJSAE-5380-02 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJSAE-5380-02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM358AN
Signetics
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Continental Device India
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
RJHSE-5384-06
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
RJ45-8N4-S
TE Connectivity's RJ45-8N4-S is a telecom & datacom connector with 8 contacts, 1000VAC dielectric voltage, and 50u plating thickness. It features a 0.7" x 0.515" x 0.74" body size, glass-filled polyester insulator, and solder termination. Ideal for board mounting applications in telecommunications and data communication systems.
09451151560
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2337993-2
TE Connectivity 2337993-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
57-10500-7
Amphenol
Amphenol 57-10500-7 is a Telecom & Datacom Connector with Gold (Au) - Nickel (Ni) finish, DIALLYL PHTHALATE insulator, and ZINC shell. Featuring 50 contacts, it is a male plug connector for cable mounting with UL94V-0 flammability rating. Ideal for telecom and datacom applications.
67298-3091
Molex
The Molex 67298-3091 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator. It has 8 contacts, solder termination, and a 30u tin plating thickness. Ideal for telecom/datacom applications, it offers right-angle mounting with locking option for reliable commercial use.
7499010121A
Wuerth Elektronik & Kg
7499010121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Tin over Nickel termination. Ideal for board mounting in applications requiring right angle connectors with high UL flammability rating of 94V-0.
ZX62WD1-B-5PC
Hirose Electric
ZX62WD1-B-5PC by Hirose Electric is a telecom & datacom connector with 5 contacts, gold termination, and liquid crystal polymer insulator. It has a dielectric voltage of 100VDC and operates b/w -30 to 85°C. Ideal for board mounting in applications requiring durable connectors with high reliability.
RJE73-188-00410
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD (50); JESD-609 Code: e3;
USB-RS422-WE-1800-BT
FTDI
USB-RS422-WE-1800-BT by FTDI features USB2.0 A male connector with 9 contacts, operating temp range of -40 to 85°C. Ideal for telecom/datacom applications, it offers polarized housing and locking mounting option for secure cable termination.
1734366-1
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel; No. of Rows Loaded: 1;
1734099-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
09454521910
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
RJHSE-3380-A1
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
TM11R-5M2-88-LP(70)
TM11R-5M2-88-LP(70) by Hirose Electric is a Telecom & Datacom Connector with 8 contacts, rated at 1A signal current. It features POLYBUTYLENE TEREPHTHALATE insulator material, Tin (Sn) finish, and operates b/w -55 to 85°C. Ideal for telecom applications requiring durable right-angle mounting with solder termination.
87824-0015
Molex 87824-0015 is a Telecom & Datacom Connector with 29 contacts, TIN finish, and glass-filled LCP insulator. It's a female receptacle connector for surface mount applications on boards.
RJHSE-3380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Type: BOARD AND PANEL; Board Mounting Option: SPLIT BOARD LOCK;
RJHSE-5381-02
Amphenol RJHSE-5381-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin finish, polyethylene insulator, and staggered PCB contact pattern. Ideal for board mounting applications with durability of 750 cycles and dielectric voltage withstand of 1000VAC.
3230
3230 connector by Hirose Electric is a Telecom & Datacom Connector with TIN finish. It features IDC termination and copper alloy shell material, suitable for cable mounting applications. With UL 94V-0 flammability rating, this male plug connector is ideal for telecom and datacom systems.
1-406541-5
TE Connectivity 1-406541-5 is a Telecom & Datacom Connector with EMI shielding. It features Matte Tin finish, Polyethylene insulator, and Phosphor Bronze contacts. Ideal for telecom applications, it has 8 contacts, operates b/w -40 to 85°C, and offers durability of 750 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJSAE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Length: .1 inch; Reference Standard: UL; Insulator Color: BLACK;
RJSAE-538A-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; PCB Contact Pattern: STAGGERED; Terminal Length: .1 inch; Plating Thickness (inch): 50u;
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: 1 inch; Shell Material: COPPER ALLOY; Body Depth: 1.108 inch;
RJSAE-5381-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Empty Shell: NO;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Terminal Length: .1 inch; Mounting Style: RIGHT ANGLE;
RJSAE-538A-04
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
RJSAE-5381-08
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Insulator Material: POLYETHYLENE; Filter Feature: NO;
RJSAE-538A-08
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: SHIELDED, 8 PORTS, 8-POSITIONS EACH; IEC Conformity: NO; Shell Finish: NICKEL;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 64; Additional Features: SHIELDED, 8 PORTS, 8-POSITIONS EACH; Termination Type: SOLDER;
RJSAE-5381-04
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; No. of Ports: 4; Contact Material: PHOSPHOR BRONZE;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; Mixed Contacts: NO; Termination Type: SOLDER;
RJSAE-5384-04
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
RJSAE-5382-04
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
RJSAE-5387-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 8+8; Mating Contact Finish: AU ON NI;
RJSAE-538F-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; PCB Contact Pattern: STAGGERED; Reference Standard: UL; Shell Material: COPPER ALLOY;
RJSAE-538N-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .65 inch; Total No. of Contacts: 8+8; Contact Style: TELCOM, MODULAR;
RJSAE-538P-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: 1 inch; Contact Material: NOT SPECIFIED; Body Length: .65 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved