Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: 1 inch; Contact Material: NOT SPECIFIED; Body Length: .65 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$4.883
100+ parts
1k+ parts
$4.345
10k+ parts
Singapore Electronics
$5.371
$4.995
$4.780
$4.565
Telecom & Datacom Connectors RJSAE-538P-02 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJSAE-538P-02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Secos
Leshan Radio
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Won-top Electronics
10168-6000EC
3m Electronic Products Division
10168-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features GOLD OVER NICKEL Termination Contact Finish and GLASS FILLED POLYESTER Insulator Material.
5555167-1
TE Connectivity 5555167-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting applications in telecom and datacom equipment.
124018312112A
Amphenol
Amphenol's 124018312112A USB connector features gold flash termination with nickel barrier, plastic insulator, and stainless steel shell. With 24 contacts, it is ideal for telecom & datacom applications requiring waterproof right angle mounting on boards and panels.
74990111211
Wuerth Elektronik & Kg
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
5-2301994-3
TE Connectivity 5-2301994-3 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
2-5174225-5
TE Connectivity 2-5174225-5 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.516", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for telecom/datacom applications requiring high reliability and signal current up to 1A in commercial settings.
67068-8010
Molex
67068-8010 by Molex is a USB connector with 4 contacts, rated at 1.5A signal current. It features a 0.433" body width, 0.669" depth, and GLASS FILLED POLYAMIDE insulator material. Ideal for telecom/datacom applications due to its durability of 1500 cycles and right-angle mounting style.
10118192-0002LF
AMPHENOL ICC
Amphenol Icc's 10118192-0002LF USB connector features a polyethylene insulator, stainless steel shell, and 5 contacts. Ideal for telecom/datacom applications, it is a female receptacle with surface mount termination and right-angle mounting on board.
629105150521
Wurth Elektronik USB Connector features Gold over Nickel termination, Liquid Crystal Polymer insulator, and Nickel shell finish. Ideal for telecom/datacom applications, this female connector with 5 contacts is surface mountable on boards in a right-angle mounting style.
2294415-1
TE Connectivity 2294415-1 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, 8 contacts, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems.
08211X1T43-F
Bel Fuse
Bel Fuse 08211X1T43-F is a Telecom & Datacom Connector with Tin (Sn) termination, Polybutylene Terephthalate insulator, and Nickel shell finish. It has 8 contacts for board and panel mounting in right angle style. Ideal for applications requiring UL94V-0 flammability code compliance.
GSB4211311WEU
GSB4211311WEU by Amphenol Icc is a USB connector with a nickel shell finish and a total of 4 contacts. It is made of polybutylene terephthalate/polyethylene insulator material and has a copper alloy shell. This connector is commonly used in telecom and datacom applications for board mounting in a right angle configuration.
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
47589-0001
47589-0001 by Molex is a USB connector with gold/nickel termination, LCP insulator, and brass contacts. It has 5 contacts, operates b/w -20 to 85°C, and offers 10000 cycle durability. Ideal for telecom/datacom applications requiring surface mount cable mounting in right angle receptacle style.
446610002
Molex 446610002 is a Telecom & Datacom Connector with GLASS FILLED POLYAMIDE insulator. Featuring 8 contacts, it uses SNAP FIT termination on BOARD AND PANEL mount. Ideal for telecom and datacom applications due to its FEMALE contact gender and JACK body style with UL 94V-0 flammability rating.
1050170001
Molex 1050170001 is a Telecom & Datacom Connector with 0.315" body length, 100VAC dielectric voltage, and gold termination. Ideal for telecom applications, it features liquid crystal polymer insulator material, brass contact material, and 5 contacts in a right-angle receptacle design.
104004-0501
The Molex 104004-0501 is a Telecom & Datacom Connector with TIN over Nickel finish. Featuring 5 contacts, it offers durability of 5000 cycles and solder termination. Ideal for telecom and datacom applications, this male plug connector has a straight mounting style and USB contact pattern.
7499010211A
7499010211A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Tin over Nickel Termination. It has 8 contacts, right angle mounting style, and solder termination type. Ideal for telecom and datacom applications requiring reliable connectivity in board-mounted configurations.
3037
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; DIN Conformance: NO; Mixed Contacts: NO; Additional Features: MAX CONTACTS (SERIES)=2; MIL Conformity: NO;
43743-8101
Molex 43743-8101 is a Telecom & Datacom Connector with 0.6"x.462"x.724" dimensions, 500000000 ohm Insulation Resistance, and 1000VAC Dielectric Withstanding Voltage. Ideal for board mounting with solder holding posts, this female jack connector has 8 contacts, operates b/w -40 to 80°C, and offers durability of up to 500 cycles in commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved