Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 2301994-5 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and features right-angle mounting for board lock applications.
Median Price
$9.103
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$12.400
100+ parts
$8.420
1k+ parts
$8.220
10k+ parts
-
Element14
$15.570
TE Connectivity
$24.690
$21.400
$20.570
Master Electronics
$15.250
$7.280
Chip1Stop
$8.170
$7.230
$5.920
Farnell
$5.750
$5.550
Powell Electronics
$7.750
$7.310
$6.330
Verical
$7.700
$7.260
$6.290
DigiKey
$7.739
Nova Conductors
$7.480
Digiode
$10.811
Rapid Electronics
IBS Electronics
$7.487
$7.063
$6.125
TME
$8.880
$7.250
Vyrian
Electro Sonic
$6.930
$5.350
VNN
Advanced Electronics
$2.530
$2.302
$2.075
Semicontronic
$4.890
$4.768
$4.743
Aztec Data Supply Inc.
$6.801
Modulus Dynamics
$8.303
$7.971
Corphita
$10.242
Neutron USA
$54.990
Argo Parts USA
Assy Fe
Perfect Parts
Continental Prestige Electronics
Netroflash
$7.330
$7.106
$6.956
The compact size of the body allows for easy installation in tight spaces.
Ensures that electromagnetic interference does not disrupt the signal transmission, enhancing performance and reliability.
Provides excellent insulation and mechanical properties, enhancing the durability of the connector.
The thick plating ensures a reliable connection and corrosion resistance, increasing the longevity of the connector.
Allows for multiple connections in a single connector, reducing the need for multiple components.
Solder termination provides a strong and durable connection, ensuring stable performance over time.
Telecom & Datacom Connectors 2301994-5 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2301994-5 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Drawings Document Clarification 08/Sep/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Infineon Technologies
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
ROHM
6-641337-3
Commscope
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulation Resistance: 500000000 ohm; Durability: 750 Cycles;
897-43-005-00-100001
Mill-max Mfg
Mill-max Mfg's 897-43-005-00-100001 USB connector has 0.303" body length, 0.156" width, and 0.362" depth. With 100VAC dielectric voltage, it suits telecom/datacom applications. Features include POLYETHYLENE insulator, TIN finish, and 30u plating thickness for durability in board mounting with a surface mount termination type.
208658-1001
Molex
Molex 208658-1001 is a telecom & datacom connector with 19 contacts, made of liquid crystal polymer insulator and nickel shell finish. It features female solder termination, brass shell material, and right-angle mounting style. Ideal for board-mounted applications in telecommunications and data communication systems.
MUSBR-4193-M0
Amphenol Communications Solutions
MUSBR-4193-M0 by Amphenol is a USB connector with 4+4 contacts, rated at 1.8A signal current. It features high temp thermoplastic insulation, zinc alloy shell material, and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring durable, polarized connectors with UL certification.
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
ARF6-16-S-D-A-K-TR
Samtec
The Samtec ARF6-16-S-D-A-K-TR is a telecom & datacom connector with 16 contacts, featuring matte tin over nickel finish. With liquid crystal polymer insulator and copper alloy shell, it has a terminal pitch of 0.635mm and operates b/w -40 to 125°C. Ideal for surface mount applications in telecommunications and data communication systems.
1734577-4
TE Connectivity 1734577-4 is a Telecom & Datacom Connector with EMI shielding, gold flash termination, and glass-filled polyamide46 insulator. It has 8 contacts, rated for 1A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durability and reliability in commercial settings.
RJHSE-5381-04
Amphenol
RJHSE-5381-04 by Amphenol is a Telecom & Datacom Connector with 32 contacts, 4 ports, and 2 PCB rows. It features Matte Tin termination finish, Polyethylene insulator material, and Phosphor Bronze contact material. Ideal for board mounting applications in telecom and datacom systems due to its compact dimensions of 2.51" x 0.53" x 0.62".
USB-A-S-VT
Adam Tech
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
PCR-E96LMDA+
Honda Tsushin Kogyo
PCR-E96LMDA+ by Honda Tsushin Kogyo is a telecom & datacom connector with 96 contacts, 2 rows, and a mating contact pitch of 0.05". It features an insulation resistance of 1Gohm, dielectric voltage of 1100VAC, and operates b/w -55 to +105°C. Ideal for board and panel mounting in commercial applications.
MP1010RX-5000
Kycon
Kycon's MP1010RX-5000 is a male plug telecom connector with 1010 contacts. It features gold flash termination, copper alloy contact material, and 1400VAC dielectric voltage. Ideal for telecom and datacom applications, this connector has a temperature range of -55 to 85°C and UL flammability rating of 94V-2.
57-10500
Amphenol 57-10500 is a Telecom & Datacom Connector with dimensions of 3.26" x 0.61" x 0.51". It has an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 1200VAC, and operates b/w -55 to 105°C. Ideal for telecom/datacom applications, it features UL-rated connectors, male contact gender, and solder termination type.
MUSB-A511-00
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: ZINC ALLOY; No. of Ports: 1; Insulator Color: BLACK;
3034
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Additional Features: STAGGERED CONFIGURATION, MAX CONTACTS (SERIES)=4; Body or Shell Style: JACK; IEC Conformity: NO; DIN Conformance: NO;
SFPP-3120-L
Pulse Electronics
SFPP-3120-L by Pulse Electronics is a Telecom & Datacom Connector with 8 ports and 160 contacts. It features a right angle mounting style, press fit termination, and board mounting type. Ideal for telecom and datacom applications requiring high-density connectivity in limited space.
10126-6000EC
3m Electronic Products Division
10126-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
2086588121
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
292303-9
TE Connectivity 292303-9 is a Telecom & Datacom Connector with 0.575" body length, POLYETHYLENE insulator, and 1000000000 ohm insulation resistance. Ideal for board mounting applications, it features a COPPER ALLOY shell material and SURFACE MOUNT termination type. Rated at 1A signal current, it offers durability of 1500 cycles in commercial environments.
85502-5005
Molex 85502-5005 is a Telecom & Datacom Connector with 0.465" x 0.453" body dimensions and matte tin over nickel finish. It features glass-filled liquid crystal polymer insulator, solder holding posts for board mounting, and brass contacts. Ideal for surface mount applications in telecom and datacom systems due to its right angle jack design with locking mounting option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2301994-7
TE Connectivity 2301994-7 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, board lock mounting option, and brass shell material. Ideal for telecom applications due to its right angle mounting style and female contact gender.
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
2301994-1
TE Connectivity's 2301994-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and operates b/w -40°C to 85°C. Ideal for telecommunications and data communication applications requiring secure board mounting.
2301994-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .544 inch; Insulator Material: LIQUID CRYSTAL POLYMER;
2301994-3
TE Connectivity's 2301994-3 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and nickel shell finish. It has 8 contacts, right-angle mounting style, and solder termination. Ideal for telecom and datacom applications requiring secure board locking and polarized housing.
2301995-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL; Total No. of Contacts: 8;
2301996-6
TE Connectivity's 2301996-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
2301996-3
TE Connectivity 2301996-3 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and board lock mounting. It operates b/w -40°C to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring right-angle board mounting.
2301995-1
TE Connectivity 2301995-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and board lock mounting. It operates b/w -40 to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring reliable connectivity in harsh environments.
2301996-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Minimum Operating Temperature: -40 Cel;
2301996-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body Depth: .531 inch; Shell Material: BRASS; Filter Feature: NO;
2301996-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel; Insulator Material: LIQUID CRYSTAL POLYMER; Board Mounting Option: BOARD LOCK;
2301995-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85; Contact Material: NOT SPECIFIED;
2301994-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Total No. of Contacts: 8; Board Mounting Option: BOARD LOCK; UL Flammability Code: 94V-0;
2301994-9
TE Connectivity 2301994-9 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It operates b/w -40°C to 85°C, suitable for board mounting applications requiring solder termination. With UL certification and 8 contacts, it's ideal for telecom and datacom systems needing high reliability in harsh environments.
2301997-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Mains Connector Rating: 115/230VAC; Reference Standard: UL;
2301997-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Finish: NICKEL; Board Mounting Option: BOARD LOCK; Termination Contact Finish: NOT APPLICABLE;
2301995-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Termination Type: SOLDER;
2301996-8
TE Connectivity 2301996-8 is a EMI shielded connector with 0.531" body depth and LCP insulator. It is used in telecom & datacom applications, featuring board lock mounting option, -40 to 85°C operating temperature range, and brass shell material.
2301997-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED; Plating Thickness (inch): 30u;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved