Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-30-1039 is a rectangular power connector with 3 contacts, rated at 9A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
Median Price
$0.389
Lifecycle Status
Suppliers In-Stock
54
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.334
100+ parts
-
1k+ parts
$0.292
10k+ parts
$0.264
Sager
$0.343
$0.260
Avnet
Heilind Electronics
$0.356
$0.299
$0.286
Adafruit Industries
$0.399
$0.379
Distrelec
$0.565
$0.543
$0.522
Mouser Electronics
$0.730
$0.460
$0.387
$0.358
RS Americas
$0.737
$0.560
$0.450
Newark
$0.746
$0.481
$0.404
DigiKey
$0.780
Element14
$0.841
$0.826
$0.812
$0.789
Bürklin Elektronik
$1.090
TTI
$0.336
$0.311
$0.284
TTI Europe
$0.373
$0.346
Verical
$0.621
Powell Electronics
$0.344
$0.325
NEP Electronics
$0.310
$0.290
Farnell
Master Electronics
$0.371
$0.337
Future Electronics
$0.285
$0.265
RS (Exports)
$0.576
$0.553
Chip1Stop
Digiode
$0.323
DF Sales Co.
Nova Conductors
$0.380
Maritex
$0.456
$0.263
$0.213
Component Electronics Inc.
$0.580
$0.430
TME
$1.720
$1.210
$0.740
NAC Semi
$0.725
IBS Electronics
$0.383
$0.363
Vyrian
Rutronik
$0.502
Chip Stock
Schukat
$0.498
$0.406
Sensible Micro Corp
Atlantic Semiconductor
Right Parts Inc.
Cyclops Electronics Ltd
Bristol Electronics
Quantum Digital Technology
PC Components Company LLC
Connector Distribution Corp
Electronics Depot
EMSNET
LIBRA Elektronik GmbH
VNN
R&J Components
Prism Electronics
Resion
A2Z Electronics, Inc.
NPI Materials, Inc.
Electro Sonic
$0.302
$0.278
Semtec, LLC
Semicontronic
$0.257
$0.256
Corphita
$0.306
Argo Parts USA
$0.378
$0.367
Advanced Electronics
Allen Electronics Distributors
$0.619
$0.487
Continental Prestige Electronics
$0.727
$0.436
$0.348
Andel Nordic
$8.311
$7.978
Aztec Data Supply Inc.
$10.513
GreenTree Electronics
EMSNET (Excess)
Abacus Technologies
RC Electronics
$0.400
$0.370
Infinite Electronics LLP (Excess)
Kepictronics
Futuretech Components
Robosynatics
$0.372
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Assy Fe
Eastek
The close contact pitch allows for efficient power transfer and secure connections.
The compact body length allows for space-saving installation.
High insulation resistance ensures safety and prevents electrical leakage.
The high voltage withstand capability adds to the reliability of the connector in various applications.
Brass contacts provide good conductivity and durability for long-lasting performance.
The high current rating allows for reliable power delivery in demanding situations.
Board mounting option provides easy and secure installation on PCBs.
Solder termination ensures a strong and reliable connection between the connector and the circuit.
Low contact resistance minimizes power loss and ensures efficient power transmission.
Straight mounting style simplifies installation and allows for easy alignment during assembly.
Power Connectors 39-30-1039 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-30-1039 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 5566 Series Product Improvement 18/Jan/2022 Mult Devs Cancel Product Improvement 09/Feb/2022
PCN Assembly/Origin - Multiple Supplier Adding Supplier 18/Aug/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Meritek Electronics
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
1723103102
Molex
The Molex 1723103102 is a power connector with dimensions of 0.405" x 0.352" x 0.614". It has a liquid crystal polymer insulator and can operate in temperatures ranging from -40°C to 105°C. This board-mounted connector features a male SQ PIN-SKT contact style and is commonly used in various applications requiring reliable power connections.
87427-2242
Molex 87427-2242 is a rectangular power connector with 22 contacts, rated at 9A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
770017-1
TE Connectivity
TE Connectivity's 770017-1 is a Power Connector with Mating Contact Pitch of 0.25", Insulation Resistance of 100M ohm, and Operating Temperature range from -55 to 120°C. Ideal for cable mounting applications, it features a durable glass-filled nylon shell and crimp termination for reliable performance in commercial settings.
1-917658-3
TE Connectivity 1-917658-3 is a rectangular power connector with 12 contacts, rated at 8A. It features a body length of 1.551", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
03-09-1081
Molex 03-09-1081 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 1500VAC and can handle up to 12A signal current. With POLYAMIDE66 insulator material, it operates b/w -40°C to 105°C temperature range.
1720650002
Molex 1720650002 is a rectangular power connector with liquid crystal polymer insulator. It offers 2200VAC dielectric voltage, -40 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in board mounting configurations.
641737-1
TE Connectivity 641737-1 is a rectangular power connector with 0.2" contact pitch, rated at 12A. It features POLYAMIDE insulation, operates b/w -55 to 105°C, and has a UL flammability rating of 94V-2. Ideal for board mounting applications requiring durable connectors with high insulation resistance.
1-770166-0
TE Connectivity's 1-770166-0 Power Connector features a rated voltage of 600V, insulation resistance of 100M ohm, and a signal current rating of 9.5A. With board mounting options and durable construction, it is ideal for commercial applications requiring reliable power connections.
3-794630-6
TE Connectivity 3-794630-6 is a Power Connector with 0.118" Mating Contact Pitch, rated for 250V and 5A current. Featuring Matte Tin finish, it has POLYAMIDE insulator and UL94V-0 flammability rating. Ideal for board mounting applications in commercial settings due to its reliability and polarization key feature.
1723103105
Molex 1723103105 power connector has dimensions of 0.818" x 0.352" x 0.614". Made of liquid crystal polymer, it operates b/w -40°C to 105°C. With 5 contacts, it is used for board mounting applications in UL-rated systems.
0-0350781-1
TE Connectivity 0-0350781-1 is a panel mount rectangular power connector with 6 contacts, made of nylon insulator material. It has a body length of 1.02", insulation resistance of 1000000000 ohm, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable male connectors with crimp termination.
5223955-2
TE Connectivity 5223955-2 is a rectangular power connector with 4 contacts, rated at 48V and 10A. It features polyethylene insulator material, press-fit termination type, and operates in temperatures from -55 to 125°C. Ideal for board mounting applications requiring reliable commercial-grade power connections.
1648132-1
TE Connectivity's 1648132-1 is a rectangular power connector with 40 contacts, rated at 250V. Made of polybutylene terephthalate, it operates b/w -40 to 105°C. Ideal for applications requiring male connectors in black insulator color and UL flammability rating of 94V-0.
39-29-9163
Molex 39-29-9163 is a rectangular power connector with 16 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 105°C.
UMPS-10-03.5-L-V-S-W-TR
Samtec
UMPS-10-03.5-L-V-S-W-TR by Samtec is a power connector with dimensions of 0.986" x 0.244" x 0.163". It features Liquid Crystal Polymer insulator, operating temp range of -55 to 125°C, and 10 contacts. Ideal for board mounting applications requiring female socket connectors with blade pin contact style.
DF22-4S-7.92C(28)
Hirose Electric
POWER CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; MIL Conformity: NO; DIN Conformance: NO;
44300-0800
The Molex 44300-0800 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1G ohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications, it offers crimp termination, polarized housing, and UL94V-0 flammability rating.
MPTC-01-24-01-6.30-01-L-V
Samtec's MPTC-01-24-01-6.30-01-L-V is a rectangular power connector with 26 contacts, featuring liquid crystal polymer insulator and matte tin over nickel finish. With a temperature range of -55 to 125°C, it is ideal for commercial applications requiring reliable power connections on boards.
1700010104
Molex 1700010104 is a rectangular power connector with insulation resistance of 1000000000 ohm. Featuring mixed contacts, it has a body length of 0.474", width of 0.491", and depth of 0.981". Ideal for commercial applications, this female connector with 4 contacts is designed for cable mounting using crimp termination.
43045-1023
The Molex 43045-1023 is a rectangular power connector with 10 contacts, featuring a body length of 0.754", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for board mounting applications, this connector has a durable design with TIN over nickel termination finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
39-30-1060
The Molex 39-30-1060 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability.
39-30-0040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
39-30-0020
39-30-0080
39-30-3045
The Molex 39-30-3045 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings, it offers durability up to 30 cycles with operating temperatures ranging from -40 to 105°C.
39-30-1122
39-30-1049
Molex 39-30-1049 is a rectangular power connector with 4 contacts made of brass and tin/copper finish. It uses POLYAMIDE66 insulator material, suitable for board mounting via solder termination. This male connector has UL94V-2 flammability rating, ideal for power applications requiring reliable connections.
39-30-0100
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
39-30-1100
39-30-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-30-3038
Molex 39-30-3038 is a rectangular power connector with 3 contacts, made of brass and tin with nickel barrier. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting applications. UL certified with 94V-0 flammability code, it offers reliable commercial use in various electronic devices.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
39-30-1042
39-30-1221
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved