Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-30-0020 is a rectangular power connector with dimensions of 0.21" x 0.38" x 0.72". It has an insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications, it features a durable brass contact material and UL94V-0 flammability rating.
Median Price
$0.406
Lifecycle Status
Suppliers In-Stock
55
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.291
100+ parts
-
1k+ parts
10k+ parts
Avnet
$0.334
Interstate Connecting
$0.338
$0.296
$0.267
Heilind Electronics
$0.360
$0.303
$0.284
Adafruit Industries
$0.380
$0.361
Sager
$0.385
$0.292
Arrow
$0.476
$0.399
$0.352
$0.312
Farnell
$0.603
$0.396
$0.375
Chip1Stop
$0.703
$0.444
Mouser Electronics
$0.740
$0.510
$0.421
$0.367
DigiKey
$0.810
$0.562
$0.449
TTI
$0.315
$0.300
TTI Europe
$0.456
Element14
$0.697
$0.675
$0.653
Master Electronics
$0.422
$0.363
Verical
$0.390
$0.370
Newark
$1.000
$0.784
RS (Exports)
$0.545
$0.529
$0.503
Powell Electronics
$0.339
$0.320
PEI Genesis
Future Electronics
$0.270
Distrelec
NEP Electronics
Digiode
$0.269
DF Sales Co.
Nova Conductors
$0.464
TME
$1.290
$0.908
$0.547
Maritex
$1.328
$0.245
NAC Semi
$0.709
IBS Electronics
$0.437
Vyrian
ComSIT Distribution GmbH
PC Components Company LLC
VNN
Bristol Electronics
A&K Electronics
Rotakorn
Rutronik
$0.354
Schukat
$0.558
Semi Source
LIBRA Elektronik GmbH
Connector Distribution Corp
Right Parts Inc.
Atlantic Semiconductor
Prism Electronics
Inventory MP
R&J Components
ACDS - Activité Composants Distribution Service
Sunrise Surplus Inc.
Component Sense
Martec Srl
LWI Electronics Inc
Bisco
Sensible Micro Corp
Semicontronic
$0.247
$0.241
$0.240
Corphita
$0.255
Advanced Electronics
Argo Parts USA
$0.414
$0.401
Continental Prestige Electronics
$0.710
Aztec Data Supply Inc.
$4.098
Andel Nordic
$9.536
$9.155
Assy Fe
GreenTree Electronics
EMSNET (Excess)
Eastek
Abacus Technologies
Kepictronics
Futuretech Components
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Glotronic Ltd.
Robosynatics
$0.362
Lucentia Tech
RTC Component Inc.
Cyclops Electronics Ltd (Excess)
Netroflash
$0.455
$0.441
$0.431
Compact body length allows for space-saving and efficient design of the power connector.
High insulation resistance ensures minimal loss of electrical signal and prevents short circuits.
Ability to withstand high voltage ensures safety and reliability in power transmission applications.
Sufficient body depth provides stability and durability to the power connector.
High maximum operating temperature allows for use in a wide range of environments without risk of overheating.
Brass contact material offers high conductivity and corrosion resistance for reliable power transmission.
UL 94V-0 flammability rating ensures fire safety compliance for the power connector.
Power Connectors 39-30-0020 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
39-30-0020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Copper/Nickel Plating 01/Aug/2011 Reflow Matte Tin Plating 27/Jul/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - 00390 Series 13/Oct/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Microsemi
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Comset Semiconductors
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
IPBT-105-H2-T-D-K
Samtec
IPBT-105-H2-T-D-K by Samtec is a power connector with liquid crystal polymer insulator, matte tin over nickel contact finish, and copper alloy contacts. It has a temperature range of -55 to 105°C and meets CSA and UL standards. Ideal for commercial applications requiring a reliable surface mount male connector with 10 contacts on a straight board mounting style.
1-480709-0
TE Connectivity
TE Connectivity 1-480709-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts arranged in S0P12 pattern, suitable for PANEL mounting. Operating temp range -55 to 105 °C makes it ideal for commercial applications requiring high durability and insulation resistance of 100M ohm.
39-29-9047
Molex
Molex 39-29-9047 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting applications. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contacts. With a durability of 30 cycles and rated current of 8A, it meets CSA and UL standards for commercial reliability.
178740-9
TE Connectivity's 178740-9 is a rectangular power connector with insulation resistance of 100MΩ, dielectric voltage withstand of 2200VAC, and operating temperature range from -30 to 105°C. Ideal for commercial applications, this male connector features crimp termination and panel mounting.
50-84-2020
The Molex 50-84-2020 is a rectangular power connector with a mating contact pitch of 0.25". It features an insulation resistance of 1e9 ohm and can withstand up to 5000VAC. Ideal for applications requiring a durable, high-current signal connection in commercial settings.
2008750004
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2-1445053-2
TE Connectivity 2-1445053-2 is a Power Connector with 0.118" mating contact pitch, rated for 250V and 5A signal current. Featuring matte tin finish, it has POLYAMIDE insulation and operates b/w -40 to 105 °C. Ideal for board mounting applications with rectangular PCB contact pattern and locking mounting options.
1-480424-0
TE Connectivity's 1-480424-0 is a rectangular power connector with a body length of 1.038in, insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. It is commonly used in power applications requiring a durable and reliable connection.
1376385-1
TE Connectivity 1376385-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated at 10A. Featuring GLASS FILLED POLYAMIDE66 insulator material, it offers high insulation resistance of 500MΩ. Ideal for board mounting with SOLDERABLE RETENTION CLIPS, this connector operates b/w -30 to 105°C and has a durability of 25 cycles.
DF22-3P-7.92DS(53)
Hirose Electric
POWER CONNECTOR;
MPTC-02-16-02-01-03-T-RA-SD
Samtec's MPTC-02-16-02-01-03-T-RA-SD is a rectangular power connector with 20 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications with a temperature range of -55 to 125°C for board mounting in right angle configuration.
350780-1
TE Connectivity's 350780-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator material. It has 4 contacts, operates b/w -55 to 105 °C, and offers high insulation resistance of 100M ohm. Ideal for PANEL mounting in applications requiring durable power connections.
39-01-4040
The Molex 39-01-4040 is a rectangular power connector with 4 contacts, suitable for commercial applications. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting, it has a durable design with a min withdrawal force of 0.5004N and polarization key for secure connections.
39-29-9046
The Molex 39-29-9046 is a rectangular power connector with 4 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-30-1100
The Molex 39-30-1100 is a rectangular power connector with 10 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design for commercial reliability over 30 cycles.
1054301102
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1-1954289-1
TE Connectivity's 1-1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
43045-0415
The Molex 43045-0415 is a rectangular power connector with 4 contacts, featuring an insulation resistance of 1Gohm and dielectric voltage withstand of 1000VAC. It utilizes liquid crystal polymer insulator material and bright tin termination finish, suitable for board mounting applications in commercial settings.
39-01-4021
Molex 39-01-4021 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. UL94V-0 rated, it has 2 FEMALE contacts for CABLE mounting. Ideal for power applications requiring reliable wire termination in compliance with UL standards.
1445022-3
TE Connectivity's 1445022-3 Power Connector features POLYAMIDE66 insulator, rated at 250V with -40 to 105 °C operating temperature. With a 0.394" x 0.207" x 0.553" body size, it is ideal for cable mounting applications requiring a female SQ PIN-SKT contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
39-30-1060
The Molex 39-30-1060 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability.
39-30-0040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
39-30-1039
39-30-0080
39-30-3045
The Molex 39-30-3045 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings, it offers durability up to 30 cycles with operating temperatures ranging from -40 to 105°C.
39-30-1122
39-30-1049
Molex 39-30-1049 is a rectangular power connector with 4 contacts made of brass and tin/copper finish. It uses POLYAMIDE66 insulator material, suitable for board mounting via solder termination. This male connector has UL94V-2 flammability rating, ideal for power applications requiring reliable connections.
39-30-0100
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
39-30-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-30-3038
Molex 39-30-3038 is a rectangular power connector with 3 contacts, made of brass and tin with nickel barrier. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting applications. UL certified with 94V-0 flammability code, it offers reliable commercial use in various electronic devices.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
39-30-1042
39-30-0043
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved