Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
Median Price
$1.520
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
Sager
1+ parts
$0.926
100+ parts
$0.728
1k+ parts
-
10k+ parts
Heilind Electronics
$0.961
Interstate Connecting
$0.997
$0.800
$0.788
Avnet
$1.049
Adafruit Industries
$1.122
$1.033
$0.967
Chip1Stop
$1.521
$1.006
$0.838
$0.736
Mouser Electronics
$1.610
$1.430
$1.210
$1.040
RS Americas
$1.720
$1.290
$1.030
Arrow
$1.733
$1.204
$0.946
$0.805
DigiKey
$1.770
$1.243
$0.981
$0.851
Newark
$2.810
$2.550
$2.430
Element14
$4.700
$3.410
$2.630
Verical
$1.667
Powell Electronics
$1.200
$1.160
TTI
$0.810
$0.780
Farnell
Master Electronics
$1.390
$1.260
PEI Genesis
RS (Exports)
$1.968
$1.816
Distrelec
Digiode
$0.739
DF Sales Co.
$0.890
Nova Conductors
$0.908
Component Electronics Inc.
$1.150
$0.870
$0.750
IBS Electronics
$1.137
$1.100
$0.975
K-1 Technologies
Vyrian
NAC Semi
$4.040
$3.730
VNN
Semi Source
EMSNET
PC Components Company LLC
Bristol Electronics
Prism Electronics
ComSIT Distribution GmbH
ComSIT USA
A2Z Electronics, Inc.
Inventory MP
Connector Distribution Corp
Right Parts Inc.
Electronics Depot
NexGen Digital
Elcom Components
Bisco
Sensible Micro Corp
$0.712
$0.657
Semtec, LLC
Semicontronic
$0.650
$0.634
$0.630
Corphita
$0.700
Argo Parts USA
Advanced Electronics
Continental Prestige Electronics
$1.270
$1.170
Aztec Data Supply Inc.
$8.691
Andel Nordic
$11.023
$10.582
Perfect Parts
GreenTree Electronics
Abacus Technologies
Robosynatics
$0.835
$0.818
Lucentia Tech
Futuretech Components
Eastek
Assy Fe
Netroflash
$0.862
$0.844
Compact body length allows for flexibility in design and saves space on the PCB.
High insulation resistance ensures reliable and safe operation, protecting against electrical shorts or malfunctions.
High dielectric voltage rating allows for safe operation in high voltage applications, providing reliable electrical insulation.
Matte Tin finish with Nickel barrier provides excellent conductivity and corrosion resistance for long-term performance.
Right angle mounting style allows for easy and convenient installation on the PCB, saving space and ensuring proper alignment.
Brass contact material offers excellent conductivity and durability, ensuring a reliable electrical connection over time.
Gold shell finish provides superior corrosion resistance and conductivity, ensuring optimal performance in various environments.
High maximum operating temperature allows for use in a wide range of temperature conditions, ensuring reliability in different environments.
Low minimum operating temperature ensures the connector can function reliably in cold environments without compromising performance.
Power Connectors 39-30-1022 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-30-1022 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Gold Plating Removal 01/Aug/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - 00390 Series 13/Oct/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BAV99WT1G
Fairchild Semiconductor
DS18B20Z+T&R
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM358N
Intersil
43045-0613
Molex
The Molex 43045-0613 is a rectangular power connector with 6 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It is designed for board mounting applications, with a dielectric voltage rating of 1500VAC. The connector has a durable construction with LCP insulator material and brass contacts, suitable for commercial use in various electronic devices.
42816-0212
Molex 42816-0212 is a rectangular power connector with 2 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC and insulation resistance of 1G ohm, it is suitable for commercial applications requiring a reliable power connection in temperatures ranging from -40 to 105°C.
39-01-2225
Molex 39-01-2225 is a rectangular power connector with 22 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a body length of 1.866", width of 0.46", and depth of 0.77". Ideal for cable mounting applications requiring high insulation resistance and UL94V-0 flammability rating.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
1716920102
Molex 1716920102 is a RECTANGULAR POWER CONNECTOR with 0.561"x.329"x.981" dimensions, operating from -40 to 120 °C. It has 2 contacts, UL94V-0 rated, for cable mounting via crimp termination. Ideal for applications requiring reliable female SQ PIN-SKT connections in receptacle style bodies.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
42820-5223
Molex 42820-5223 is a rectangular power connector with 5 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
1-480704-0
TE Connectivity
TE Connectivity 1-480704-0 is a Power Connector with dimensions of 1.08" x 0.55" x 1.08". It has POLYAMIDE insulator, operates b/w -55 to 105°C, and features 6 contacts for cable mounting applications.
IPS1-125-01-L-D
Samtec
Samtec IPS1-125-01-L-D is a rectangular power connector with 50 contacts, rated at 2.3A signal current. Featuring liquid crystal polymer insulator and phosphor bronze contact material, it operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
39-28-1043
Molex 39-28-1043 is a rectangular power connector with 4 contacts, TIN over copper finish. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability, it meets CSA, TUV, and UL standards.
MPTC-01-24-01-6.30-01-L-V
Samtec's MPTC-01-24-01-6.30-01-L-V is a rectangular power connector with 26 contacts, featuring liquid crystal polymer insulator and matte tin over nickel finish. With a temperature range of -55 to 125°C, it is ideal for commercial applications requiring reliable power connections on boards.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
503148-1090
503148-1090 by Molex is a rectangular power connector with 10 contacts, 0.059" mating pitch, and 500M ohm insulation resistance. Ideal for board mounting applications in commercial settings, it features a right angle mounting style and tin termination finish. Operating temperature ranges from -40 to 105°C.
172233-1
TE Connectivity's 172233-1 power connector features insulation resistance of 100M ohm, rated voltage of 600V, and operating temperature range from -20 to 105°C. Ideal for commercial applications requiring a durable male receptacle with crimp termination and natural insulator color.
7461147
Wuerth Elektronik & Kg
The Wurth Elektronik & Kg 7461147 is a rectangular power connector with a body length and width of 0.35 inch, and a body depth of 0.27 inch. It has 16 contacts and is designed for board mounting. With a max operating temperature of 155°C and min operating temperature of -55°C, it is suitable for commercial applications requiring reliable power connections.
03-09-2032
Molex 03-09-2032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 2000VAC, rated current of 14A, and operates b/w -55 to 105°C. The connector features a polarized housing, solder termination, and can accommodate wire sizes from 22 to 14 AWG.
DF57H-2P-1.2V(21)
Hirose Electric
BOARD CONNECTOR; Contact Material: BRASS; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED;
39-28-8140
The Molex 39-28-8140 is a rectangular power connector with a body length of 1.2", body width of 0.38", and body depth of 0.5". It has an insulation resistance of 1,000,000,000 ohm and can withstand a dielectric voltage of 2200VAC. This connector is commonly used in board mounting applications for power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
39-30-1060
The Molex 39-30-1060 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It has a temperature range from -40 to 105°C, suitable for board mounting applications requiring durability and reliability.
39-30-0040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
39-30-0020
39-30-1039
39-30-0080
39-30-3045
The Molex 39-30-3045 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings, it offers durability up to 30 cycles with operating temperatures ranging from -40 to 105°C.
39-30-1122
39-30-1049
Molex 39-30-1049 is a rectangular power connector with 4 contacts made of brass and tin/copper finish. It uses POLYAMIDE66 insulator material, suitable for board mounting via solder termination. This male connector has UL94V-2 flammability rating, ideal for power applications requiring reliable connections.
39-30-0100
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
39-30-1100
39-30-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-30-3038
Molex 39-30-3038 is a rectangular power connector with 3 contacts, made of brass and tin with nickel barrier. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting applications. UL certified with 94V-0 flammability code, it offers reliable commercial use in various electronic devices.
39-30-1042
39-30-1241
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved