Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-29-1027 is a rectangular power connector with 2 contacts, made of brass and polyamide. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
Median Price
$0.603
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.595
100+ parts
-
1k+ parts
$0.530
10k+ parts
$0.428
Adafruit Industries
$0.611
RS Americas
$0.740
$0.560
Newark
$0.840
$0.667
Mouser Electronics
$0.860
$0.744
$0.664
$0.548
DigiKey
$1.090
TTI
Element14
$0.672
$0.648
$0.601
Verical
$0.515
$0.458
Powell Electronics
$0.533
$0.427
Farnell
$0.372
Avnet
$0.536
$0.440
Chip1Stop
$0.301
Digiode
$0.551
TestEquity
$0.570
Nova Conductors
$0.599
Vyrian
IBS Electronics
$0.525
$0.425
VNN
Extreme Components
ComSIT Distribution GmbH
Pegasus Components GmbH
R&J Components
Inventory MP
Bristol Electronics
Semi Source
Prism Electronics
Semicontronic
$0.256
$0.250
$0.248
Corphita
$0.522
Argo Parts USA
$0.581
Continental Prestige Electronics
$0.587
Netroflash
Advanced Electronics
Aztec Data Supply Inc.
$8.738
Andel Nordic
$8.778
$8.427
Perfect Parts
Authorized Procurement Solutions
Assy Fe
RTC Component Inc.
Speed Components Ltd (Excess)
Compact size allows for easy installation in tight spaces.
High insulation resistance ensures reliable and safe operation.
Can withstand high voltages, providing protection against electrical breakdown.
Tin over nickel finish provides excellent conductivity and corrosion resistance.
Can operate at high temperatures without compromising performance.
UL 94V-0 rated for high flame resistance, ensuring safety in case of fire.
Sufficient number of contacts for power transfer and connectivity.
Board mounting allows for secure attachment and stability.
Low contact resistance ensures efficient power transfer.
Right angle mounting provides flexibility in setting up connections.
Power Connectors 39-29-1027 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-29-1027 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Location 15/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
STMicroelectronics
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
43045-0224
Molex
Molex 43045-0224 is a rectangular power connector with 2 contacts, TIN/LEAD finish, and glass-filled LCP insulator. It has a body width of 0.29" and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
1330G4
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Empty Shell: NO; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;
172298-1210
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
640466-1
TE Connectivity
TE Connectivity's 640466-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 5 contacts, rated at 12A, and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring a reliable male connector with solder termination and locking features.
10-84-4090
Molex 10-84-4090 is a rectangular power connector with 9 contacts, Tin finish, and Polyamide66 insulator. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications due to its durability and UL certification.
PCIB26W11M400A1/AA
Positronic Industries
PCIB26W11M400A1/AA by Positronic: Rectangular power connector with 26 contacts, gold flash over nickel finish. Glass-filled polyester insulator for high durability. Ideal for board and panel mounting in applications requiring mixed contacts.
03-06-2032
Molex 03-06-2032 is a rectangular power connector with 0.145" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 2100VAC, operating temperature range from -40 to 105°C, and can handle up to 5A signal current. The connector has a male crimp termination type with natural insulator color and locking mounting option.
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
1723104104
Molex 1723104104 Power Connector features Liquid Crystal Polymer insulator, -40 to 105°C operating temp range, and UL 94V-0 flammability rating. With male SQ pin-skt contacts, it is ideal for board mounting applications requiring a 4-contact connector.
IPD1-15-D-K-M
Samtec
Samtec's IPD1-15-D-K-M is a rectangular power connector with 30 contacts, featuring polyamide66 insulator material. It is designed for cable mounting and uses crimp termination. Ideal for applications requiring reliable female contact style with square pin sockets.
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
42820-6213
Molex 42820-6213 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
1-1445022-2
TE Connectivity 1-1445022-2 is a Power Connector with dimensions 1.457" x 0.207" x 0.553". Rated for 250V, it operates b/w -40 to 105°C. Ideal for power applications, featuring POLYAMIDE66 insulator and UL94V-0 flammability rating.
IPD1-02-S-K-R
Samtec's IPD1-02-S-K-R is a RECTANGULAR POWER CONNECTOR with 2 FEMALE contacts. Made of POLYAMIDE66, it uses CRIMP termination and is ideal for CABLE mounting applications.
VLP-02V
J S T Mfg
VLP-02V by J S T Mfg is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. Featuring 2 contacts, it has a 94V-0 UL Flammability Code and FEMALE crimp termination. Ideal for CABLE mounting, this PLUG connector is commonly used in power applications.
43045-0801
Molex 43045-0801 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and matte tin finish for signal currents up to 5A.
2204581-1
TE Connectivity's 2204581-1 is a rectangular power connector with rated voltage of 400V and UL flammability code of 94V-0. It has insulator material made of glass filled liquid crystal polymer, operating temperature range from -40 to 105°C, and plating thickness of 118.11u. Ideal for board mounting applications, this male connector with press fit termination supports a signal current rating of 35A.
39-30-3036
Molex 39-30-3036 is a rectangular power connector with matte tin finish. It features 3 contacts, brass contact material, and nylon66 insulator. Ideal for board mounting applications requiring press fit termination with right angle mounting style.
50-84-1035
The Molex 50-84-1035 is a rectangular power connector with 3 contacts, rated at 13.5A signal current. Featuring a mating contact pitch of 0.25", it has an insulation resistance of 1Gohm and can withstand up to 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55°C to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-29-6188
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-29-9023
39-29-0123
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
39-29-9047
39-29-9046
39-29-9027
The Molex 39-29-9027 is a rectangular power connector with 2 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
39-29-6248
39-29-6088
Molex 39-29-6088 is a rectangular power connector with 8 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
39-29-6048
Molex 39-29-6048 is a rectangular power connector with 4 contacts, made of brass and polyamide66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C. Ideal for board mounting applications requiring durability, reliability, and high insulation resistance.
39-29-1028
39-29-9043
Molex 39-29-9043 is a rectangular power connector with 0.165" mating contact pitch, suitable for board mounting with 2 rows of contacts. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contact material. Rated at 8A signal current, it has a durability of 30 cycles and operates b/w -40 to 105°C.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
39-29-9066
The Molex 39-29-9066 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 0.819 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in power applications requiring a durable and reliable connection.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
39-29-9029
39-29-1047
39-29-9067
The Molex 39-29-9067 is a rectangular power connector with 6 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0063
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved