Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-29-6048 is a rectangular power connector with 4 contacts, made of brass and polyamide66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C. Ideal for board mounting applications requiring durability, reliability, and high insulation resistance.
Median Price
$1.860
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.143
100+ parts
1k+ parts
10k+ parts
-
Heilind Electronics
$1.147
$0.921
Interstate Connecting
$1.192
$0.971
$0.944
Verical
$1.390
$1.330
Sager
$1.420
$0.914
Element14
$1.610
$1.140
$1.103
RS (Exports)
$1.400
$1.120
Mouser Electronics
$1.880
$1.500
$1.230
$1.190
Newark
$1.980
$1.580
$1.290
Arrow
$2.066
$1.438
$1.129
DigiKey
$2.110
$1.484
$1.171
RS Americas
$2.120
$1.680
$1.480
Farnell
$2.245
$1.389
Chip1Stop
$2.650
$1.110
$0.989
$0.960
TTI
$0.940
$0.910
$0.890
NEP Electronics
PEI Genesis
Master Electronics
$2.320
$1.320
$1.170
TTI Europe
$1.037
$0.972
$0.950
Distrelec
DF Sales Co.
$0.850
Digiode
$1.086
Nova Conductors
$1.161
Maritex
$2.099
$1.264
$1.095
$0.996
Vyrian
VNN
IBS Electronics
$1.100
$1.063
$1.025
Sensible Micro Corp
Manoshevitz Elec. Sales
Ashlea Components Ltd
American Connector Supply Corp
Inventory MP
Semi Source
Prism Electronics
Component Sense
Bristol Electronics
ACDS - Activité Composants Distribution Service
Elcom Components
Connector Distribution Corp
Right Parts Inc.
Semicontronic
$0.730
$0.712
$0.708
Corphita
$1.029
Aranea Global
$1.137
$1.092
Argo Parts USA
Advanced Electronics
Continental Prestige Electronics
$1.490
$1.040
$0.825
Aztec Data Supply Inc.
$2.393
Andel Nordic
$9.586
$9.203
Assy Fe
Perfect Parts
Authorized Procurement Solutions
Robosynatics
$1.141
$1.117
Lucentia Tech
GreenTree Electronics
$1.085
Glotronic Ltd.
Eastek
Cyclops Electronics Ltd (Excess)
EMSNET (Excess)
Compact body length allows for space-saving and efficient installation in tight spaces.
High insulation resistance ensures safe and reliable operation by preventing electrical leakage.
High dielectric voltage withstand capability provides protection against electrical breakdown, making it suitable for high voltage applications.
Brass contact material offers excellent conductivity and durability, ensuring long-lasting and reliable electrical connections.
High maximum operating temperature allows for use in demanding environments without compromising performance.
Receptacle body style provides a secure and stable connection, minimizing the risk of disconnection during operation.
Straight mounting style offers easy and hassle-free installation on the board, ensuring a secure connection.
Power Connectors 39-29-6048 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-29-6048 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 5566 Series Product Improvement 18/Jan/2022 Mult Devs Cancel Product Improvement 09/Feb/2022
PCN Assembly/Origin - Mult Devs Tooling Replacement 10/Oct/2022
PCN Other - 5566 Series Tooling 12/Jun/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
EU2B-YS3103F
Idec
ROTARY SWITCH;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
New Jersey Semiconductor Products
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WT
Diotec Semiconductor Ag
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Yangzhou Yangjie Electronics
Micro Commercial Components
0-0350767-1
TE Connectivity 0-0350767-1 is a power connector with panel mount, insulation resistance of 100M ohm, and rated current of 19A. Ideal for commercial applications, it features a mating contact pitch of 0.25", nylon insulator material, and operating temperatures from -55 to 105°C.
03-09-1041
Molex
The Molex 03-09-1041 is a rectangular power connector with a body width of 0.34 inch and depth of 1 inch. It has an insulator material made of POLYAMIDE and can operate in temperatures ranging from -55 to 105 °C. This connector, with a total of 4 contacts, is commonly used in panel mounting applications.
2008750006
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
10-84-5090
The Molex 10-84-5090 is a rectangular power connector with 9 contacts, tin finish, and 3 rows. It has an insulation resistance of 1G ohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43650-0210
The Molex 43650-0210 is a rectangular power connector with mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 8.5A. It is used in board mounting applications, featuring a split board lock option and surface mount termination for temperatures ranging from -40 to 105°C.
43025-0408
The Molex 43025-0408 is a rectangular power connector with 0.27" body dimensions and 1000VAC dielectric voltage. It features POLYAMIDE insulation, 4 contacts, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable crimp termination connectors.
39-28-1043
Molex 39-28-1043 is a rectangular power connector with 4 contacts, TIN over copper finish. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability, it meets CSA, TUV, and UL standards.
891-8985/205-201
Wago
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
44914-0401
The Molex 44914-0401 is a rectangular power connector with a mating contact pitch of 0.118 inches. It has a body width of 0.29 inch and depth of 0.39 inch, making it suitable for board mounting applications. With an insulator material made of glass filled liquid crystal polymer, this connector offers reliable performance in commercial settings.
6643269-1
Tyco Electronics Elcon
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 6643269;
2174661033
RECTANGULAR POWER CONNECTOR;
1-480319-0
TE Connectivity 1-480319-0 is a Power Connector with 0.61"x.33"x.94" dimensions, POLYAMIDE insulator, and -55 to 105°C operating temperature range. It has 2 contacts for crimp termination in cable mounting applications at 115/230VAC mains connector rating.
794617-8
TE Connectivity 794617-8 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. It features POLYAMIDE66 insulation, operates b/w -40 to 105°C, and has a rectangular contact pattern. Ideal for commercial applications requiring reliable power connections in a compact form factor.
M80-5000000M1-02-PM1-00-000
Harwin Plc
POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
15-06-0100
Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.
350209-1
TE Connectivity's 350209-1 is a rectangular power connector with 0.2" mating contact pitch, suitable for board mounting. It features a 12A signal current rating, POLYAMIDE insulator material, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable power connections.
IPD1-06-D-K-R
Samtec
The Samtec IPD1-06-D-K-R is a RECTANGULAR POWER CONNECTOR with 12 contacts, POLYAMIDE66 shell material, and FEMALE crimp termination. Ideal for power applications requiring secure cable mounting.
43045-0801
Molex 43045-0801 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and matte tin finish for signal currents up to 5A.
1954289-2
TE Connectivity's 1954289-2 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures ranging from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
643414-1
TE Connectivity 643414-1 is a Power Connector with 0.8"x.3"x.3" dimensions, POLYAMIDE insulator, and Tin termination finish. Rated for 12A current, it's used in board mounting applications for power connections at -40 to 105°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-29-6188
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-29-9023
39-29-0123
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
39-29-9047
39-29-9046
39-29-9027
The Molex 39-29-9027 is a rectangular power connector with 2 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
39-29-6248
39-29-6088
Molex 39-29-6088 is a rectangular power connector with 8 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
39-29-1028
39-29-9043
Molex 39-29-9043 is a rectangular power connector with 0.165" mating contact pitch, suitable for board mounting with 2 rows of contacts. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contact material. Rated at 8A signal current, it has a durability of 30 cycles and operates b/w -40 to 105°C.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
39-29-9066
The Molex 39-29-9066 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 0.819 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in power applications requiring a durable and reliable connection.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
39-29-9029
39-29-1047
39-29-9067
The Molex 39-29-9067 is a rectangular power connector with 6 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0063
39-29-6148
Molex 39-29-6148 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved