Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-29-9067 is a rectangular power connector with 6 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
Median Price
$0.639
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Arrow
1+ parts
$0.474
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.619
$0.519
Adafruit Industries
Heilind Electronics
$0.666
$0.543
$0.527
Newark
$0.710
$0.651
$0.601
Element14
$1.010
$0.746
Mouser Electronics
$1.030
$0.718
$0.620
$0.563
DigiKey
$1.220
$0.561
Powell Electronics
$0.640
$0.610
Master Electronics
$0.643
$0.612
Farnell
$0.444
NEP Electronics
TTI
$0.520
$0.483
$0.473
Verical
Chip1Stop
$0.539
$0.524
TTI Europe
$0.534
Digiode
$0.164
DF Sales Co.
$0.420
Nova Conductors
$0.642
TestEquity
$0.680
TME
$0.960
$0.730
$0.700
Component Electronics Inc.
$1.150
$0.870
$0.750
Voyager Components
$1.518
IBS Electronics
$0.637
$0.613
NAC Semi
$0.969
Vyrian
Component Sense
VNN
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Prism Electronics
Semtec, LLC
Bisco
Corphita
$0.156
Semicontronic
$0.389
$0.379
$0.377
Advanced Electronics
Argo Parts USA
$0.623
Netroflash
$0.597
Continental Prestige Electronics
$0.890
$0.586
$0.414
Andel Nordic
$2.603
$2.499
Aztec Data Supply Inc.
$6.247
Authorized Procurement Solutions
GreenTree Electronics
$0.821
Kepictronics
Perfect Parts
Eastek
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
EMSNET (Excess)
0.54 inch - The compact size of the body makes this power connector suitable for tight spaces and allows for easy installation.
1000000000 ohm - With high insulation resistance, this power connector ensures reliable and safe operation even in demanding conditions.
0.38 inch - The slim design of the body enables easy integration of the power connector into various applications without taking up much space.
1500VAC - The high dielectric withstand voltage ensures protection against electrical breakdown, making this power connector ideal for high voltage applications.
TIN COPPER - The TIN COPPER finish on termination contacts provides excellent conductivity and corrosion resistance for long-lasting performance.
0.5 inch - The adequate depth of the body allows for secure and stable connections, minimizing the risk of disconnection or short circuits.
POLYAMIDE66 - The durable and heat-resistant insulator material enhances the overall reliability and safety of the power connector.
PEG - The PEG mounting option offers a secure and stable connection to the circuit board, ensuring proper functionality of the power connector.
105 - With a high maximum operating temperature, this power connector can withstand elevated temperatures without compromising its performance.
40 °C - The low minimum operating temperature allows for reliable operation even in freezing conditions, making this power connector versatile in various environments.
35u - The adequate plating thickness ensures good conductivity and resistance to wear and tear, increasing the longevity of the power connector.
Power Connectors 39-29-9067 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
39-29-9067 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 5566 Series Product Improvement 18/Jan/2022 Mult Devs Cancel Product Improvement 09/Feb/2022
PCN Assembly/Origin - Multiple Devices 02/Nov/2015
PCN Other - 5566 Tooling 11/Jun/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
MMBT2907ALT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
1554216002
Molex
WIRE AND CABLE;
43020-2200
The Molex 43020-2200 is a rectangular power connector with 22 contacts, PBT-POLYESTER insulator, and UL 94V-0 flammability rating. It is used for commercial applications, featuring crimp termination, straight mounting style, and latch option for secure installation on cables and panels.
1648110-1
Tyco Electronics Amp
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .99 inch; Filter Feature: NO; Empty Shell: NO;
35151-0410
The Molex 35151-0410 is a rectangular power connector with 4 contacts, 2 rows, and a mating contact pitch of 0.35". It has an insulation resistance of 100M ohm, operates b/w -40 to 120°C, and uses PBT-POLYESTER insulator material. Ideal for commercial applications requiring wire termination in polarized lock mounting configurations.
43160-2102
The Molex 43160-2102 is a rectangular power connector with 2 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 5000VAC, insulation resistance of 1Gohm, and operates b/w -40 to 75°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
34566-0303
Molex 34566-0303 is a RECTANGULAR POWER CONNECTOR with 73 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high contact density and secure power connections.
1-316132-5
TE Connectivity 1-316132-5 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYESTER insulator. It has 5 contacts, rated for 15A current, and operates b/w -55 to 105°C. Ideal for board mounting applications with SOLDER termination clips.
39-01-2080
The Molex 39-01-2080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105 °C and has a contact resistance of 10 mohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
462070006
Molex 462070006 is a rectangular power connector with 6 contacts, rated at 12A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and polarization key for secure mating. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40 to 105°C.
1501772100
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1-770170-0
TE Connectivity 1-770170-0 is a rectangular power connector with 3 contacts, rated at 600V and 9.5A. Featuring a mating contact pitch of 0.163", it has an insulation resistance of 100M ohm and operates b/w -55 to +105°C. Ideal for board mounting applications, this connector offers durability of up to 20 cycles and features a polarized housing for secure connections.
43020-0400
Molex 43020-0400 is a rectangular power connector with 4 contacts, PBT-POLYESTER insulator, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring crimp termination on cables or panels.
43020-2401
Molex 43020-2401 is a rectangular power connector with 24 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It is used in commercial applications for cable mounting with crimp termination, offering reliable male contact arrangement.
3-794630-8
TE Connectivity 3-794630-8 is a power connector with 0.118" contact pitch, rated for 250V and 5A signal current. It features POLYAMIDE insulation, UL94V-0 flammability rating, and solder termination. Ideal for commercial applications requiring reliable board-mounted connectors with locking options.
39-01-4032
Molex 39-01-4032 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 0.165" mating contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in cable and panel mounting setups. With UL94V-2 flammability rating, it offers reliable performance with polarization key for secure connections.
1-179555-6
TE Connectivity 1-179555-6 is a rectangular power connector with 12 contacts, GLASS FILLED POLYETHYLENE/POLYESTER insulation, and UL94V-0 flammability rating. It operates b/w -55 to 105°C, suitable for commercial applications requiring high insulation resistance of 100MΩ. Ideal for power connections in panels with crimp termination and male contact gender.
43650-0316
The Molex 43650-0316 power connector features a body length of 0.498", insulation resistance of 1G ohm, and matte tin termination finish. Ideal for board mounting with a temperature range from -40 to 105 °C, it has a contact arrangement of S0P3 and durability of 30 cycles.
43640-0600
Molex 43640-0600 is a rectangular power connector with 6 contacts, rated at 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications due to its durability of 30 cycles and UL flammability rating of 94V-0.
43650-0424
The Molex 43650-0424 is a rectangular power connector with bright tin finish and glass-filled liquid crystal polymer insulator. Featuring brass contacts, it has 4 male contacts and UL 94V-0 flammability rating. Ideal for board mounting in various power applications.
03-06-1062
Molex 03-06-1062 is a RECTANGULAR POWER CONNECTOR with 6 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, ideal for commercial applications requiring reliable power connections in panel-mounted setups.
43045-0614
The Molex 43045-0614 is a rectangular power connector with 6 contacts, featuring matte tin over nickel finish and glass-filled liquid crystal polymer insulator. It has a temperature range of -40 to 105°C, UL flammability rating of 94V-0, and meets CSA, TUV, and UL standards. Ideal for board mounting applications requiring durability and reliability in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-29-6188
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-29-9023
39-29-0123
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
39-29-9047
39-29-9046
39-29-9027
The Molex 39-29-9027 is a rectangular power connector with 2 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
39-29-6248
39-29-6088
Molex 39-29-6088 is a rectangular power connector with 8 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
39-29-6048
Molex 39-29-6048 is a rectangular power connector with 4 contacts, made of brass and polyamide66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C. Ideal for board mounting applications requiring durability, reliability, and high insulation resistance.
39-29-1028
39-29-9043
Molex 39-29-9043 is a rectangular power connector with 0.165" mating contact pitch, suitable for board mounting with 2 rows of contacts. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contact material. Rated at 8A signal current, it has a durability of 30 cycles and operates b/w -40 to 105°C.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
39-29-9066
The Molex 39-29-9066 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 0.819 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in power applications requiring a durable and reliable connection.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
39-29-9029
39-29-1047
39-29-0063
39-29-9026
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved