Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 50-84-2020 is a rectangular power connector with a mating contact pitch of 0.25". It features an insulation resistance of 1e9 ohm and can withstand up to 5000VAC. Ideal for applications requiring a durable, high-current signal connection in commercial settings.
Median Price
$0.188
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.120
100+ parts
-
1k+ parts
10k+ parts
$0.097
Interstate Connecting
Sager
$0.122
$0.112
$0.093
RS Americas
$0.191
Adafruit Industries
$0.230
$0.218
Mouser Electronics
$0.500
$0.327
$0.258
$0.235
Arrow
$0.552
$0.361
$0.282
DigiKey
$0.570
$0.375
$0.241
TTI
$0.212
Farnell
$0.184
$0.180
Waytek Inc.
$0.148
$0.096
$0.091
Element14
$0.537
$0.424
$0.408
Powell Electronics
$0.124
$0.115
Verical
$0.123
Master Electronics
$0.239
$0.233
NEP Electronics
$0.094
Avnet
$0.113
Newark
$0.242
TTI Europe
$0.126
RS (Exports)
$0.355
$0.281
PSC Electronics
Chip1Stop
Digiode
$0.116
DF Sales Co.
Nova Conductors
TME
$0.380
$0.272
$0.204
$0.136
IBS Electronics
$0.139
$0.128
Vyrian
Sensible Micro Corp
Cyclops Electronics Ltd
Connector Distribution Corp
Right Parts Inc.
VNN
Bristol Electronics
M&R Communications
Elcom Components
LWI Electronics Inc
Andel Nordic
$0.065
$0.045
Semicontronic
$0.080
$0.078
Corphita
$0.110
Argo Parts USA
$0.140
Modulus Dynamics
$0.162
$0.160
$0.155
Aztec Data Supply Inc.
$0.219
Advanced Electronics
Netroflash
$0.229
Continental Prestige Electronics
$0.512
$0.284
$0.215
Infinite Electronics LLP (Excess)
Assy Fe
EMSNET (Excess)
Perfect Parts
Allen Electronics Distributors
Robosynatics
$2.150
Lucentia Tech
The close spacing of the contacts allows for efficient power transfer and compact design, making it suitable for applications where space is limited.
High insulation resistance ensures reliable and safe operation by preventing leakage or short circuits.
The high voltage withstand capability makes it suitable for use in high-power applications where voltage fluctuations may occur.
The high temperature rating allows the connector to operate efficiently in elevated temperature environments without compromising performance.
With a durability rating of 50 cycles, this connector is designed to withstand repeated connect-disconnect cycles, ensuring long-term reliability.
Power Connectors 50-84-2020 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
50-84-2020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Product Improvement 01/Aug/2017
PCN Assembly/Origin - GCN 10628217 18/Feb/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1554216002
Molex
WIRE AND CABLE;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Onsemi
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
Diotec Semiconductor Ag
643414-1
TE Connectivity
TE Connectivity 643414-1 is a Power Connector with 0.8"x.3"x.3" dimensions, POLYAMIDE insulator, and Tin termination finish. Rated for 12A current, it's used in board mounting applications for power connections at -40 to 105°C temperatures.
794120-1
TE Connectivity's 794120-1 Power Connector features Tin termination, POLYAMIDE insulator, and a max operating temperature of 105°C. Ideal for board mounting with a terminal pitch of 5.08mm, it is used in applications requiring a polarized male connector with a rated current of 12A.
39-30-3046
Molex 39-30-3046 is a rectangular power connector with 4 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 500VDC. Ideal for board mounting applications, it has a temperature range from -40 to +105 °C and durability of 30 cycles.
5223955-2
TE Connectivity 5223955-2 is a rectangular power connector with 4 contacts, rated at 48V and 10A. It features polyethylene insulator material, press-fit termination type, and operates in temperatures from -55 to 125°C. Ideal for board mounting applications requiring reliable commercial-grade power connections.
50-84-2120
The Molex 50-84-2120 is a rectangular power connector with 12 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connectors with a temperature range from -55 to +105°C.
42820-2223
Molex 42820-2223 is a rectangular power connector with 2 contacts, made of glass-filled nylon. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
87427-0402
The Molex 87427-0402 is a rectangular power connector with 4 contacts, TIN over nickel finish, and polyamide insulator. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable male connectors with right-angle mounting style.
212514-1004
RECTANGULAR POWER CONNECTOR;
03-06-2122
Molex 03-06-2122 is a rectangular power connector with POLYAMIDE insulator. It has 12 contacts arranged in S0P12, suitable for cable mounting with crimp termination. Operating temperature ranges from -40 to 105 °C, making it ideal for commercial applications requiring reliable power connections.
19-09-2128
Molex 19-09-2128 is a rectangular power connector with 12 contacts arranged in 3 rows. Made of POLYAMIDE, it operates b/w -40 to 105°C. Suitable for commercial use, this plug-style connector is panel-mounted and features crimp termination, ideal for various power applications.
43045-0622
The Molex 43045-0622 is a rectangular power connector with 6 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
39-28-1043
Molex 39-28-1043 is a rectangular power connector with 4 contacts, TIN over copper finish. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability, it meets CSA, TUV, and UL standards.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
794617-8
TE Connectivity 794617-8 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. It features POLYAMIDE66 insulation, operates b/w -40 to 105°C, and has a rectangular contact pattern. Ideal for commercial applications requiring reliable power connections in a compact form factor.
43045-0600
The Molex 43045-0600 is a rectangular power connector with 6 contacts, featuring bright tin over nickel termination finish. It has a body length of 0.518", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
39-01-3043
The Molex 39-01-3043 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has a body length and width of 0.378 inches, and a body depth of 0.941 inches. This connector is commonly used in power applications where durability, high insulation resistance (1G ohm), and a wide operating temperature range (-40 to 105°C) are required.
39-29-6248
Molex 39-29-6248 is a rectangular power connector with 24 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with high dielectric strength.
39-01-3069
The Molex 39-01-3069 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator material, and UL94V-0 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and is suitable for commercial applications requiring durable wire termination in cable mounting setups.
FHP-03-02-T-S-TR
Samtec
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: TIN OVER NICKEL; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: NOT SPECIFIED;
43650-0200
The Molex 43650-0200 is a rectangular power connector with a mating contact pitch of 0.118" and body width of 0.172". It features bright tin over nickel termination, suitable for board mounting applications. With UL certification and polarization key, it offers reliable performance in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
50-84-2040
The Molex 50-84-2040 is a rectangular power connector with 4 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connections in temperatures ranging from -55 to 105°C.
50-84-2090
The Molex 50-84-2090 is a rectangular power connector with 9 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connectors with a temperature range from -55 to +105°C.
50-84-1030
The Molex 50-84-1030 is a rectangular power connector with 3 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
50-84-1150
The Molex 50-84-1150 is a rectangular power connector with 15 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
50-84-1060
The Molex 50-84-1060 is a rectangular power connector with 6 contacts, rated at 11A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
50-84-1040
The Molex 50-84-1040 is a rectangular power connector with 4 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55 to 105°C.
50-84-2030
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Minimum Operating Temperature: -55 Cel;
50-84-1010
The Molex 50-84-1010 is a rectangular power connector with a mating contact pitch of 0.25". Featuring an insulation resistance of 1Gohm, it can withstand up to 5000VAC. Ideal for commercial applications, this connector has a rated current of 13.5A and operates b/w -55°C to 105°C temperature range.
50-84-1090
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Body Depth: 1.08 inch;
50-84-1120
The Molex 50-84-1120 is a rectangular power connector with a mating contact pitch of 0.25 inches. It has a body length of 1.05 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications requiring reliable power connections.
50-84-1035
The Molex 50-84-1035 is a rectangular power connector with 3 contacts, rated at 13.5A signal current. Featuring a mating contact pitch of 0.25", it has an insulation resistance of 1Gohm and can withstand up to 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55°C to 105°C.
50-84-2060
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Insulator Material: POLYAMIDE;
50-84-1025
50-84-1020
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
50-84-2022
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Durability: 50 Cycles;
50-84-2010
The Molex 50-84-2010 is a rectangular power connector with a mating contact pitch of 0.25". It features an insulation resistance of 1G ohm, dielectric voltage of 5000VAC, and can handle temperatures from -55 to 105°C. Ideal for commercial applications requiring a durable, crimp termination type connector with a rated current of 13.5A.
50-84-2150
50-84-2031
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Mounting Option-1: POLARIZED LCK;
50-84-2042
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Maximum Wire Size: 14 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved