Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 42816-0212 is a rectangular power connector with 2 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC and insulation resistance of 1G ohm, it is suitable for commercial applications requiring a reliable power connection in temperatures ranging from -40 to 105°C.
Median Price
$0.979
Lifecycle Status
Suppliers In-Stock
56
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.510
100+ parts
-
1k+ parts
10k+ parts
Avnet
$0.702
$0.576
Sager
$0.709
$0.557
Chip1Stop
$0.722
Interstate Connecting
$0.732
$0.613
$0.579
Heilind Electronics
$0.735
$0.600
$0.582
Verical
$0.770
$0.740
Farnell
$0.566
$0.543
Misumi USA
$0.990
Mouser Electronics
$1.130
$0.900
$0.746
$0.692
RS (Exports)
$1.150
$0.980
$0.910
Arrow
$1.351
$1.011
$0.828
Distrelec
$1.419
$0.921
$0.834
Element14
$1.424
$0.942
$0.838
$0.771
PSC Electronics
$1.466
DigiKey
$1.640
$1.151
$0.909
Adafruit Industries
$6.731
$6.394
PEI Genesis
NEP Electronics
TTI Europe
$0.672
$0.639
Master Electronics
$1.110
$0.865
$0.731
Newark
$0.612
Powell Electronics
$0.750
$0.720
BTC Electronics
Freelance Electronics
$0.302
Digiode
$0.484
Miltronics Inc.
$0.656
DF Sales Co.
$0.676
Nova Conductors
$0.679
FDH Electronics
$0.691
$0.559
$0.521
Component Electronics Inc.
$0.870
TME
$1.260
$0.860
Bristol Electronics
$1.688
$0.624
Sensible Micro Corp
Vyrian
NAC Semi
Chip Stock
IBS Electronics
$0.856
$0.827
$0.673
Rutronik
$0.592
Bisco
VNN
LIBRA Elektronik GmbH
Component Sense
Q Components
EMSNET
American Connector Supply Corp
PC Components Company LLC
Inventory MP
Classic Components Corporation
R&J Components
Sunrise Surplus Inc.
Resion
Extreme Components
Quittner & Schimek s.r.o.
Prism Electronics
Semicontronic
$0.433
$0.422
$0.420
Corphita
$0.459
Argo Parts USA
$0.669
$0.649
Netroflash
$0.645
$0.632
Modulus Dynamics
$1.117
Continental Prestige Electronics
$1.410
$0.908
$0.743
Aztec Data Supply Inc.
$2.783
Andel Nordic
$6.257
$6.007
Advanced Electronics
Perfect Parts
GreenTree Electronics
EMSNET (Excess)
Assy Fe
Abacus Technologies
Kepictronics
Robosynatics
$8.956
$8.773
Lucentia Tech
Futuretech Components
Eastek
Infinite Electronics LLP (Excess)
Cyclops Electronics Ltd (Excess)
ErreBi Group
The compact size of the body allows for easy installation in tight spaces, making this power connector versatile in a variety of applications.
High insulation resistance ensures reliable and safe performance by preventing electrical leakage or short circuits.
The high dielectric strength allows this power connector to withstand high voltages, ensuring safe operation in demanding environments.
With a maximum operating temperature of 105°C, this power connector can handle high heat environments without compromising performance.
The UL 94V-0 flammability rating indicates that this power connector is highly resistant to catching fire, providing an extra layer of safety in case of overheating.
The high rated current capacity of 50A allows this power connector to handle high power loads, making it suitable for a wide range of applications.
The use of polyester for the insulator material provides excellent electrical insulation properties and durability, ensuring long-term reliability.
The cable mounting type makes installation quick and easy, allowing for convenient connection to cables without the need for additional tools or hardware.
The crimp termination type provides a secure and reliable connection between the power connector and the cable, reducing the risk of signal interference or power loss.
Power Connectors 42816-0212 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
42816-0212 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Digitron Semiconductors
Rochester Electronics
43650-0227
Molex
The Molex 43650-0227 is a rectangular power connector with 2 contacts, rated at 8.5A signal current. Featuring a mating contact pitch of 0.118", it uses liquid crystal polymer insulator material and has a dielectric voltage of 1500VAC. Ideal for board mounting applications in commercial settings, this connector offers durability of 30 cycles and operates b/w -40 to 105°C temperatures.
15-06-0046
Molex 15-06-0046 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for cable and panel mounting in commercial applications requiring durable crimp termination.
2-1410271-0
TE Connectivity
TE Connectivity 2-1410271-0 is a rectangular power connector with liquid crystal polymer insulator. It has a rated voltage of 250V and insulation resistance of 10^10 ohm. Ideal for power applications, it features matte tin over nickel termination contact finish and complies with UL standards.
3-794630-4
TE Connectivity 3-794630-4 is a power connector with 0.118" mating contact pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, featuring POLYAMIDE insulation material and UL94V-0 flammability rating. With a compact body size of 0.27"x.364", it offers reliable performance in commercial settings.
IPD1-02-D-K-M
Samtec
Samtec's IPD1-02-D-K-M is a rectangular power connector with 4 contacts, 0.505" body depth, and POLYAMIDE66 insulator. Ideal for cable mounting applications, featuring crimp termination and female SQ PIN-SKT contact style.
5916G6
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1327G21
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Mounting Type: CABLE; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED;
15-28-6102
The Molex 15-28-6102 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with high dielectric strength and polarization key for secure connections.
10-84-4030
The Molex 10-84-4030 is a RECTANGULAR POWER CONNECTOR with 3 contacts, POLYAMIDE66 insulator, and Bright Tin termination. It has an operating temperature range of -55 to 105°C and dielectric voltage withstand of 500VAC. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
992G2
992G2 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, HERMAPHRODITIC gender, and UL 94V-0 flammability rating. It features an empty shell and cable mounting type. Ideal for power applications requiring reliable connections in harsh environments.
105313-1202
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
1700010104
Molex 1700010104 is a rectangular power connector with insulation resistance of 1000000000 ohm. Featuring mixed contacts, it has a body length of 0.474", width of 0.491", and depth of 0.981". Ideal for commercial applications, this female connector with 4 contacts is designed for cable mounting using crimp termination.
2334571-1
TE Connectivity's 2334571-1 is a rectangular power connector with 26 contacts, rated at 100A and 60V. Featuring glass-filled liquid crystal polymer insulator, it is UL certified for applications requiring high current signal transmission in temperatures ranging from -40 to 125°C. Ideal for use in power systems where mixed contacts are needed.
1053071202
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
39-28-1203
Molex 39-28-1203 is a rectangular power connector with 20 contacts, rated at 13A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and UL94V-2 flammability rating.
43650-0315
The Molex 43650-0315 power connector has a body length of 0.498", insulation resistance of 1000000000 ohm, and operates b/w -40 to 105 °C. It is used in board mounting applications, with a contact material of brass and UL flammability rating of 94V-0.
170351-0003
The Molex 170351-0003 power connector features polyester insulator, operating temperatures from -40 to 105°C, and UL flammability rating of 94V-0. It has 2 contacts, crimp termination, and is ideal for cable mounting applications requiring a female blade pin-skt receptacle.
43650-0200
The Molex 43650-0200 is a rectangular power connector with a mating contact pitch of 0.118" and body width of 0.172". It features bright tin over nickel termination, suitable for board mounting applications. With UL certification and polarization key, it offers reliable performance in commercial settings.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
42816-0412
The Molex 42816-0412 is a rectangular power connector with 4 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC, it has an insulation resistance of 1G ohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring high reliability, this connector uses crimp termination on cables with a locking mounting option.
42816-0312
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
42816-0612
428192212
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
42816-0512
42818-0212
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
428192213
428192213 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of copper alloy, is suitable for board mounting and has a rated current of 50A.
42818-0312
The Molex 42818-0312 is a rectangular power connector with 0.394" mating contact pitch, suitable for panel mounting. Featuring a body length of 1.625", insulation resistance of 1 Gohm, and operating temperatures from -40°C to 105°C, it is ideal for commercial applications requiring reliable power connections.
42818-0412
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Pitch (inch): 0.394; Additional Features: MINI-FIT SR, COMPATIBLE CONTACTS: 42817-0011; 42817-0031; 42817-0111, POLARIZED;
42818-0512
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; UL Flammability Code: 94V-0; Additional Features: MINI-FIT SR, COMPATIBLE CONTACTS: 42817-0011; 42817-0031; 42817-0111, POLARIZED;
428194213
428192223
428192223 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of glass-filled polyamide46, is suitable for board mounting and has a rated current of 50A.
428193213
Molex 428193213 power connector features 1.33" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage withstand. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with matte tin finish and brass contacts for reliable signal current up to 50A on a single male connector.
428193222
428192214
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: SILVER; Body Width: .555 inch; Total No. of Contacts: 2;
428194223
Molex 428194223 Power Connector features 1.724" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage. Ideal for board mounting applications with a max operating temp of 105°C, rated current of 50A, and UL94V-0 flammability rating.
428195213
Molex 428195213 Power Connector features 2.118" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage. Ideal for commercial applications with -40 to 105°C operating range, UL-rated for reliability, and supports up to 50A signal current.
428193214
Molex 428193214 power connector has dimensions of 1.33" x 0.555" x 0.827". With a rated current of 50A, it is used for board mounting applications. The connector features male blade pin-skt contacts with silver finish and operates b/w -40°C to 105°C.
428196222
428192243
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved