Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 42816-0612 is a rectangular power connector with 6 contacts, rated at 50A. It features a dielectric voltage of 2200VAC and insulation resistance of 1G ohm. Ideal for commercial applications requiring a reliable power connection in temperatures ranging from -40 to 105°C.
Median Price
$1.674
Lifecycle Status
Suppliers In-Stock
46
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.965
100+ parts
-
1k+ parts
$0.786
10k+ parts
$0.764
Heilind Electronics
$1.039
$0.834
$0.822
Arrow
$1.607
$1.393
$1.275
RS (Exports)
$1.740
$1.480
$1.370
Mouser Electronics
$1.790
$1.270
$1.170
$1.060
RS Americas
$2.320
$1.840
Element14
$2.470
$1.990
Farnell
$2.732
$1.708
$1.594
DigiKey
$3.300
$2.307
$1.912
Newark
$3.900
$3.140
$2.350
TTI
$1.160
$0.950
PEI Genesis
Verical
$1.985
$1.734
$1.413
NEP Electronics
TTI Europe
$1.126
$1.061
$1.018
Powell Electronics
$0.910
$0.880
$0.730
Master Electronics
$1.320
$1.140
$1.017
Chip1Stop
$1.110
$1.010
PSC Electronics
Digiode
$0.495
DF Sales Co.
$0.982
Hutch & Son
$1.300
Nova Conductors
$1.547
Bristol Electronics
$1.762
$1.092
$0.881
TME
$1.890
$1.710
Rapid Electronics
$2.420
IBS Electronics
$1.086
$1.043
$0.888
NAC Semi
$1.680
$1.560
Vyrian
VNN
Dan-Mar Components
Prism Electronics
Cyclops Electronics Ltd
Legend Electronics Inc.
Diverse Electronics
M&R Communications
Component Electronics Inc.
EMSNET
Elcom Components
Sunrise Surplus Inc.
QIE Inc.
Resion
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Corphita
$0.469
Semicontronic
$0.890
$0.868
$0.863
Argo Parts USA
$1.240
Netroflash
Continental Prestige Electronics
$2.920
$1.830
$1.520
Aztec Data Supply Inc.
$3.520
Andel Nordic
$4.591
$4.407
Perfect Parts
GreenTree Electronics
Robosynatics
$1.102
$1.080
Lucentia Tech
EMSNET (Excess)
Assy Fe
Futuretech Components
Eastek
SIE Connect GmbH (Excess)
The long body length allows for easy connectivity and secure attachment.
High insulation resistance ensures minimal electrical leakage, reducing the risk of short circuits.
Compact body width makes the connector suitable for tight spaces or densely packed equipment.
High dielectric voltage withstand capacity enhances safety and reliability during operation.
The high maximum operating temperature allows for use in a wide range of environments.
Suitable for use in extreme cold conditions without compromising performance.
Capable of handling high current loads, making it ideal for applications requiring a strong power connection.
The black color provides a sleek and professional look to the connector.
Designed for easy and secure cable mounting, ensuring stable connections.
Crimp termination provides a reliable and secure connection method for the wires.
Female contact gender ensures compatibility with corresponding male connectors for proper mating.
Power Connectors 42816-0612 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
42816-0612 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Other - Various Series Supplier Change 23/Jul/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
EU2B-YS303C
Idec
ROTARY SWITCH;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infinex
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Comset Semiconductors
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1969688-3
TE Connectivity 1969688-3 is a rectangular power connector with 600V rated voltage and 19A signal current. It uses GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material for applications requiring board mounting, solder termination, and operating temperatures from -55 to 105°C.
2-917807-3
TE Connectivity 2-917807-3 is a RECTANGULAR POWER CONNECTOR with 6 contacts, GLASS FILLED POLYESTER insulator, and CRIMP termination. Operating from -55 to 105 °C, it has an Insulation Resistance of 1 Gohm. Used in commercial applications for power connections with UL94V-0 flammability rating.
39-01-4041
Molex 39-01-4041 is a rectangular power connector with 4 contacts, suitable for commercial applications. It has a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting, it features crimp termination and a durable design lasting up to 30 cycles.
1604050-3
TE Connectivity's 1604050-3 is a RECTANGULAR POWER CONNECTOR with dimensions of 4.23" x 2.75" x 1.307". Rated for 600V, it uses POLYCARBONATE insulator material and operates b/w -20°C to 105°C. Ideal for power applications requiring a male contact gender and crimp termination on stranded cables at 115/230VAC mains rating.
2008750004
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
39-29-9049
The Molex 39-29-9049 is a rectangular power connector with 4 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. It has a body size of 0.38" x 0.38" x 0.5", suitable for board mounting applications. With a temperature range from -40 to 105°C, it offers reliable performance in commercial settings.
794617-2
TE Connectivity's 794617-2 Power Connector features a Mating Contact Pitch of 0.118", Insulation Resistance of 100MΩ, and Rated Voltage of 250V. Ideal for commercial applications, this connector has a Body Length of 0.157" and operates within a temperature range from -40°C to 105°C.
2-1445057-2
TE Connectivity's 2-1445057-2 is a RECTANGULAR POWER CONNECTOR with 0.118" Mating Contact Pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, it features POLYAMIDE insulation, -40 to 105°C operating temperature range, and UL94V-0 flammability rating.
15-06-0141
Molex 15-06-0141 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 2.409" x 0.681" x 0.772", operating from -40 to 105°C. Ideal for commercial applications requiring reliable power connections with solder termination on panels.
10-84-5090
The Molex 10-84-5090 is a rectangular power connector with 9 contacts, tin finish, and 3 rows. It has an insulation resistance of 1G ohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
647845-7
TE Connectivity 647845-7 is a RECTANGULAR POWER CONNECTOR with POLYCARBONATE insulator. It has a rated voltage of 600V, operating temperature range from -20 to 105 °C. Ideal for power applications requiring crimp termination and cable mounting with wire sizes ranging from 12 to 6 AWG.
39-30-0020
The Molex 39-30-0020 is a rectangular power connector with dimensions of 0.21" x 0.38" x 0.72". It has an insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications, it features a durable brass contact material and UL94V-0 flammability rating.
43650-0303
The Molex 43650-0303 is a rectangular power connector with insulation resistance of 1G ohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used for board and cable mounting applications, featuring a male contact gender, solder termination type, and right angle mounting style.
43650-0216
The Molex 43650-0216 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings with a rated current of 8.5A and operating temperatures ranging from -40 to +105°C.
42818-0312
The Molex 42818-0312 is a rectangular power connector with 0.394" mating contact pitch, suitable for panel mounting. Featuring a body length of 1.625", insulation resistance of 1 Gohm, and operating temperatures from -40°C to 105°C, it is ideal for commercial applications requiring reliable power connections.
42818-0212
The Molex 42818-0212 is a rectangular power connector with 0.394" contact pitch, suitable for commercial applications. Featuring a body length of 1.232", insulation resistance of 1Gohm, and operating temperature range from -40°C to 105°C, it offers reliable performance in various panel-mounted power connection setups.
2-1103004-3
TE Connectivity's 2-1103004-3 is a rectangular power connector with 15 contacts, made of POLYETHYLENE. It features UL 94V-0 flammability rating and crimp termination. Ideal for cable mounting applications in various industries.
43640-0501
The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.
39-01-2041
Molex 39-01-2041 is a rectangular power connector with 4 contacts, made of brass. It has a mating contact pitch of 0.165", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications requiring durability up to 30 cycles.
39-31-0020
Molex 39-31-0020 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring POLYAMIDE66 insulator material, it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
42816-0412
The Molex 42816-0412 is a rectangular power connector with 4 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC, it has an insulation resistance of 1G ohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring high reliability, this connector uses crimp termination on cables with a locking mounting option.
42816-0212
Molex 42816-0212 is a rectangular power connector with 2 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC and insulation resistance of 1G ohm, it is suitable for commercial applications requiring a reliable power connection in temperatures ranging from -40 to 105°C.
42816-0312
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
428192212
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
42816-0512
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
428192213
428192213 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of copper alloy, is suitable for board mounting and has a rated current of 50A.
42818-0412
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Pitch (inch): 0.394; Additional Features: MINI-FIT SR, COMPATIBLE CONTACTS: 42817-0011; 42817-0031; 42817-0111, POLARIZED;
42818-0512
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; UL Flammability Code: 94V-0; Additional Features: MINI-FIT SR, COMPATIBLE CONTACTS: 42817-0011; 42817-0031; 42817-0111, POLARIZED;
428194213
428192223
428192223 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of glass-filled polyamide46, is suitable for board mounting and has a rated current of 50A.
428193213
Molex 428193213 power connector features 1.33" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage withstand. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with matte tin finish and brass contacts for reliable signal current up to 50A on a single male connector.
428193222
428192214
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: SILVER; Body Width: .555 inch; Total No. of Contacts: 2;
428194223
Molex 428194223 Power Connector features 1.724" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage. Ideal for board mounting applications with a max operating temp of 105°C, rated current of 50A, and UL94V-0 flammability rating.
428195213
Molex 428195213 Power Connector features 2.118" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage. Ideal for commercial applications with -40 to 105°C operating range, UL-rated for reliability, and supports up to 50A signal current.
428193214
Molex 428193214 power connector has dimensions of 1.33" x 0.555" x 0.827". With a rated current of 50A, it is used for board mounting applications. The connector features male blade pin-skt contacts with silver finish and operates b/w -40°C to 105°C.
428196222
428194242
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved