Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 105307-1205 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. Featuring 5 contacts, it has a 94V-0 UL Flammability Code. Ideal for CABLE mounting, this FEMALE connector is commonly used in power applications.
Median Price
$0.384
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Verical
1+ parts
$0.252
100+ parts
-
1k+ parts
10k+ parts
$0.233
Interstate Connecting
$0.263
$0.230
$0.208
Heilind Electronics
$0.280
$0.235
$0.255
Arrow
$0.293
$0.264
$0.261
RS Americas
$0.446
$0.298
$0.245
DigiKey
$0.490
$0.357
$0.306
$0.283
RS (Exports)
Mouser Electronics
$0.520
$0.379
$0.309
$0.291
Chip1Stop
$0.580
$0.366
Element14
$0.759
$0.505
$0.397
$0.351
Powell Electronics
$0.253
Master Electronics
$0.236
Newark
$0.594
$0.445
TTI
$0.323
$0.267
NEP Electronics
Nova Conductors
Digiode
$0.269
Maritex
$1.344
$0.342
$0.249
IBS Electronics
$0.282
$0.262
Chip Stock
TME
$0.303
Vyrian
VNN
Corphita
Argo Parts USA
$0.259
Netroflash
Continental Prestige Electronics
$0.486
$0.218
Allen Electronics Distributors
$0.410
Andel Nordic
$1.059
$1.017
Aztec Data Supply Inc.
$3.123
RC Electronics
$0.270
$0.260
$0.250
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Futuretech Components
Robosynatics
$6.572
$6.438
Polyamide is a durable and heat-resistant material, providing good insulation for the connector. This ensures the safety and reliability of the power connection.
Rectangular connectors are known for their robust design and ease of mating, making them a popular choice for power applications. The rectangular shape also facilitates easy installation and removal.
Having a UL 94V-0 flammability rating means that the connector is highly resistant to catching fire or spreading flames. This is crucial for ensuring the safety of the equipment in which the connector is used.
With 5 contacts available, this connector can facilitate the transfer of multiple power signals or data streams simultaneously. This makes it suitable for applications requiring multiple connections.
The cable mounting type allows for easy and secure connection of the connector to a cable, providing a reliable power connection. This type is commonly used in applications where flexibility is required.
Crimped connectors provide a strong and stable connection between the wire and the connector, reducing the risk of loose connections or signal interference. This ensures a reliable power transmission.
Female contacts are typically used to receive male contacts, ensuring a secure and stable connection. The female gender also helps prevent dust and debris from entering the connector, maintaining its performance.
A receptacle-style connector allows for easy insertion of the mating connector, providing a secure and reliable connection. This style is commonly used in applications where frequent connections and disconnections are required.
Power Connectors 105307-1205 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
105307-1205 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Nano-Fit Receptacle 27/Mar/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
39-30-3032
Molex
The Molex 39-30-3032 is a rectangular power connector with matte tin over nickel finish. It features 3 contacts, brass material, and polyamide insulator for reliability in commercial applications. With a body length of 0.94", width of 0.213", and depth of 0.49", it is ideal for board mounting in right angle configurations.
43650-0224
Molex 43650-0224 is a rectangular power connector with bright tin finish. It features glass-filled liquid crystal polymer insulator and brass contacts. Ideal for board mounting in applications requiring male surface mount connectors with 2 contacts.
1723101103
Molex 1723101103 is a rectangular power connector with liquid crystal polymer insulator. It has a rated current of 14A and operates b/w -40 to 120°C. Ideal for board mounting, it features male SQ pin-skt contacts and is UL 94V-0 compliant.
640445-3
TE Connectivity
TE Connectivity's 640445-3 is a rectangular power connector with a mating contact pitch of 0.156". It features an insulation resistance of 5Gohm, operating temperature range from -55 to 105°C, and rated current of 7A. Ideal for board mounting applications requiring durable connectors with male contacts and solder termination.
03-09-1081
Molex 03-09-1081 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 1500VAC and can handle up to 12A signal current. With POLYAMIDE66 insulator material, it operates b/w -40°C to 105°C temperature range.
IPD1-05-D-K-R
Samtec
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Contact Finish: NOT APPLICABLE; Mounting Type: CABLE;
10-84-5020
The Molex 10-84-5020 is a rectangular power connector with 2 contacts, featuring bright tin termination finish and polyester insulator material. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
1053081204
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
44441-2003
Molex 44441-2003 is a rectangular power connector with 0.295" contact pitch, 0.918" body length, and 1000000000 ohm insulation resistance. It is used in cable mounting applications, featuring crimp termination and a polarized housing for secure connections in commercial settings.
39-01-3029
The Molex 39-01-3029 is a rectangular power connector with POLYAMIDE66 insulator material. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable crimp termination connectors with locking mounting options.
39-29-1067
The Molex 39-29-1067 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durability and reliability in commercial settings.
43025-0608
The Molex 43025-0608 is a rectangular power connector with 6 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable female connectors with hybrid contact style.
1723103102
The Molex 1723103102 is a power connector with dimensions of 0.405" x 0.352" x 0.614". It has a liquid crystal polymer insulator and can operate in temperatures ranging from -40°C to 105°C. This board-mounted connector features a male SQ PIN-SKT contact style and is commonly used in various applications requiring reliable power connections.
39-30-1102
Molex 39-30-1102 is a rectangular power connector with 10 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
15-06-0085
Molex 15-06-0085 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has an insulation resistance of 1G ohm and can withstand temperatures from -40 to 105°C. This connector is commonly used in cable and panel mounting applications for power connections.
2077780004
IPD1-15-D-K-M
Samtec's IPD1-15-D-K-M is a rectangular power connector with 30 contacts, featuring polyamide66 insulator material. It is designed for cable mounting and uses crimp termination. Ideal for applications requiring reliable female contact style with square pin sockets.
10153466-04LF
Amphenol Communications Solutions
10153466-04LF by Amphenol is a rectangular power connector with POLYAMIDE66 insulator material. It has 4 contacts, operates b/w -40 to 105°C, and meets UL standards. Ideal for cable mounting applications, featuring female contact gender and crimp termination for reliable connections.
43160-2103
Molex 43160-2103 is a rectangular power connector with 3 contacts, TIN over copper finish. It has a dielectric voltage of 5000VAC and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 75°C.
7461057
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 7461057 is a rectangular power connector with 6 contacts. It has a press fit termination and features tin copper contact finish. This connector is commonly used in board mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1053071202
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1053081208
Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.
1053081206
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1053071204
The Molex 1053071204 is a rectangular power connector with a polyamide insulator material. It has 4 contacts and a female contact gender. This connector is commonly used in cable applications for its crimp termination type.
1053131102
105309-1103
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1053091102
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
105307-1203
Power Connectors;
105313-2108
105313-2108 by Molex is a rectangular power connector with 8 contacts, TIN over nickel finish. Made of liquid crystal polymer, it has male gender contacts for solder termination. UL 94V-0 rated, it's used in board mounting applications for power connectivity.
1053101108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1053082204
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
105313-2203
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
1053091202
Molex 1053091202 is a RECTANGULAR POWER CONNECTOR with TIN OVER NICKEL finish. Made of LIQUID CRYSTAL POLYMER, it has 2 contacts and UL 94V-0 rating. Ideal for BOARD mounting, SOLDER termination, and MALE contact gender in power applications.
105310-1204
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
1053101206
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; JESD-609 Code: e3;
105313-1103
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Termination Contact Finish: TIN OVER NICKEL; Empty Shell: NO;
105313-1202
105313-2102
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Empty Shell: NO; Filter Feature: NO;
1053071206
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYAMIDE; Mating Contact Finish: NOT SPECIFIED; Body Depth: .618 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved