Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Median Price
$0.236
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Newark
1+ parts
$0.168
100+ parts
1k+ parts
10k+ parts
-
Avnet
$0.215
Arrow
$0.217
$0.198
$0.187
$0.186
Interstate Connecting
$0.228
$0.200
$0.181
Heilind Electronics
$0.270
$0.227
$0.214
Mouser Electronics
$0.380
$0.277
$0.230
$0.201
Farnell
$0.399
$0.213
$0.193
DigiKey
$0.440
$0.317
$0.271
$0.251
Distrelec
$0.482
$0.289
Element14
$0.498
$0.314
$0.272
$0.266
TTI Europe
$0.222
Verical
Powell Electronics
$0.232
$0.220
Master Electronics
$0.241
Chip1Stop
$0.318
TTI
$0.209
$0.197
PSC Electronics
TestEquity
$0.240
Nova Conductors
$0.244
Digiode
$0.256
Maritex
$0.401
$0.174
$0.143
TME
$0.410
$0.292
$0.290
FDH Electronics
$0.491
$0.397
$0.370
NAC Semi
$0.417
Vyrian
IBS Electronics
$0.258
$0.245
Bristol Electronics
VNN
Electro Sonic
$0.188
ACDS - Activité Composants Distribution Service
Brevan Electronics
Continental Prestige Electronics
$0.226
$0.221
Argo Parts USA
$0.219
Corphita
$0.243
Semicontronic
$0.446
$0.435
$0.433
Aztec Data Supply Inc.
$5.083
Andel Nordic
$16.170
$11.320
Infinite Electronics LLP (Excess)
EMSNET (Excess)
Kepictronics
Assy Fe
Abacus Technologies
Glotronic Ltd.
Eastek
GreenTree Electronics
Perfect Parts
Robosynatics
$0.091
Authorized Procurement Solutions
Netroflash
ErreBi Group
Power Connectors 1053081206 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1053081206 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Weitronic Enterprise
Zetex Plc
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
National Semiconductor
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1-480698-0
TE Connectivity
TE Connectivity 1-480698-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 0.58" x 0.55" x 1.08" dimensions, operates b/w -55 to 105 °C, and offers 1000000000 ohm insulation resistance. Ideal for commercial applications requiring durable, crimped cable termination at 115/230VAC mains connector rating.
44914-1001
Molex
44914-1001 by Molex is a rectangular power connector with 10 contacts and a mating contact pitch of 0.118 inches. It has a body width of 0.29 inch and is used for board mounting in commercial applications.
1-178139-2
TE Connectivity 1-178139-2 is a rectangular power connector with 6 contacts, rated at 8A. Featuring glass-filled polyester insulator material, it offers high durability with 500 cycles. Ideal for board mounting applications, this connector has a max operating temperature of 105°C and min of -55°C.
39-29-9067
The Molex 39-29-9067 is a rectangular power connector with 6 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
176301-1
TE Connectivity's 176301-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 18 contacts, rated at 7A, and operates b/w -30 to 105°C. Ideal for PANEL mounting, it offers high durability with a min withdrawal force of 0.556N and max insertion force of 4.448N.
39-29-5203
Molex 39-29-5203 is a rectangular power connector with 20 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
10-08-1081
Molex 10-08-1081 is a rectangular power connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.2", it offers high insulation resistance of 1000000000 ohm. Ideal for board mounting applications in commercial settings, operating b/w -40 to 80°C.
2004530003
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
42820-6213
Molex 42820-6213 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
03-09-1094
Molex 03-09-1094 is a rectangular power connector with 9 contacts, POLYAMIDE insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.198", suitable for commercial applications with operating temperatures ranging from -40°C to 105°C. Ideal for cable mounting with solder termination, this connector offers reliable performance in various industries.
4-794627-0
TE Connectivity 4-794627-0 is a Power Connector with 0.118" contact pitch, rated for 250V and -40 to 105°C operating range. Ideal for board mounting with matte tin finish, it features POLYAMIDE insulation and UL94V-0 flammability rating.
43020-0400
Molex 43020-0400 is a rectangular power connector with 4 contacts, PBT-POLYESTER insulator, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring crimp termination on cables or panels.
0-0350782-1
TE Connectivity's 0-0350782-1 is a panel mount rectangular power connector with insulation resistance of 1000000000 ohm. With UL Flammability Code 94V-0, it has a rated current of 19 A and operates b/w -55 to 105 °C. Ideal for commercial applications requiring durable male connectors with crimp termination.
1723104103
Molex 1723104103 Power Connector features Liquid Crystal Polymer insulator, -40 to 105°C operating temp, and UL 94V-0 flammability. With male SQ pin-skt contacts, it's ideal for board mounting applications requiring a compact 0.543" x 0.352" x 0.614" size.
428193222
Molex 428193222 Power Connector features 0.394" mating contact pitch, 1.33" body length, and 1000000000 ohm insulation resistance. Ideal for applications requiring a durable connector with 2200VAC dielectric voltage withstand and -40 to 105°C operating temperature range.
1700010112
Molex 1700010112 is a rectangular power connector with 12 contacts, featuring polybutylene terephthalate insulation material. It has a body length of 1.372", width of 0.491", and depth of 0.981". Suitable for cable mounting with crimp termination, this connector offers high insulation resistance of 1GΩ and mixed contacts.
1729520601
Molex 1729520601 is a RECTANGULAR POWER CONNECTOR with 6 contacts, 0.4" width, and 0.551" depth. Made of POLYAMIDE, it operates b/w -40 to 105°C. Ideal for cable mounting applications due to its FEMALE crimp termination and RECEPTACLE body style.
2-1103004-3
TE Connectivity's 2-1103004-3 is a rectangular power connector with 15 contacts, made of POLYETHYLENE. It features UL 94V-0 flammability rating and crimp termination. Ideal for cable mounting applications in various industries.
VLP-06V
J S T Mfg
VLP-06V by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 6 contacts, made of POLYAMIDE66. It has a UL Flammability Code of 94V-0 and FEMALE contact gender. Ideal for CABLE mounting with CRIMP termination, it's commonly used in power applications.
43025-0408
The Molex 43025-0408 is a rectangular power connector with 0.27" body dimensions and 1000VAC dielectric voltage. It features POLYAMIDE insulation, 4 contacts, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable crimp termination connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1053071202
1053081204
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1053081208
Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.
1053071204
The Molex 1053071204 is a rectangular power connector with a polyamide insulator material. It has 4 contacts and a female contact gender. This connector is commonly used in cable applications for its crimp termination type.
1053131102
105309-1103
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1053091102
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
105307-1203
Power Connectors;
105313-2108
105313-2108 by Molex is a rectangular power connector with 8 contacts, TIN over nickel finish. Made of liquid crystal polymer, it has male gender contacts for solder termination. UL 94V-0 rated, it's used in board mounting applications for power connectivity.
1053101108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1053082204
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
105313-2203
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
1053091202
Molex 1053091202 is a RECTANGULAR POWER CONNECTOR with TIN OVER NICKEL finish. Made of LIQUID CRYSTAL POLYMER, it has 2 contacts and UL 94V-0 rating. Ideal for BOARD mounting, SOLDER termination, and MALE contact gender in power applications.
105310-1204
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
1053101206
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; JESD-609 Code: e3;
105313-1103
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Termination Contact Finish: TIN OVER NICKEL; Empty Shell: NO;
105313-1202
105307-1205
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: NANO-FIT, POLARIZED; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
105313-2102
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Empty Shell: NO; Filter Feature: NO;
1053081214
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved