Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 19-09-2069 is a rectangular power connector with POLYAMIDE insulator, UL 94V-2 flammability rating, and operating temperatures from -40 to 105°C. It features a total of 6 contacts arranged in S0P6 configuration for cable or panel mounting applications. The hybrid contact style and locking mounting option make it suitable for commercial use in various electronic devices.
Median Price
$0.486
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.424
100+ parts
$0.403
1k+ parts
10k+ parts
-
Heilind Electronics
$0.437
$0.368
$0.346
Verical
$0.490
$0.480
$0.450
Interstate Connecting
$0.508
$0.425
$0.402
RS Americas
$0.782
$0.524
$0.430
DigiKey
$0.910
$0.626
$0.501
Mouser Electronics
$0.970
$0.702
$0.644
$0.475
RS (Exports)
$1.160
$0.880
$0.620
NEP Electronics
Chip1Stop
$0.325
Master Electronics
$0.466
$0.415
TTI
Farnell
$0.482
Powell Electronics
$0.470
$0.410
DF Sales Co.
$0.300
Digiode
Nova Conductors
$0.440
TestEquity
TME
$0.540
$0.394
Bristol Electronics
$2.925
$1.813
$1.097
VNN
Vyrian
IBS Electronics
$0.536
Electronic Treasures
Sogenti Electronics
R&J Components
Resion
Inventory MP
Standard Data Resources
Connector Distribution Corp
Right Parts Inc.
Bisco
American Connector Supply Corp
ZD Integrated Circuits Inc.
PC Components Company LLC
NAC Semi
Semicontronic
$0.309
$0.301
Corphita
$0.382
Argo Parts USA
$0.412
$0.399
Continental Prestige Electronics
Advanced Electronics
Netroflash
$0.431
Aztec Data Supply Inc.
$6.317
Andel Nordic
$34.770
$24.341
Authorized Procurement Solutions
Lee Johnson Sales, Inc.
RTC Component Inc.
Compact size allows for easy installation in tight spaces.
Slim design helps save space and reduces clutter in the application.
Provides ample depth for secure connections and stability.
Polyamide is known for its high temperature resistance and durability, ensuring long-lasting performance.
Can withstand high temperatures without compromising functionality.
Ideal for use in extreme cold environments without any risk of damage.
Rectangular design allows for secure and stable connection between devices.
UL certification ensures high safety standards, giving peace of mind to the user.
Sufficient number of contacts for efficient power transfer and connectivity.
Versatile mounting options for ease of installation in various settings.
Crimp termination ensures secure connections and reduces the risk of loose connections.
Offers compatibility with both male and female connectors, providing flexibility in usage.
Power Connectors 19-09-2069 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
19-09-2069 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitano Enterprise
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Dc Components
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Yageo
10153466-04LF
Amphenol Communications Solutions
10153466-04LF by Amphenol is a rectangular power connector with POLYAMIDE66 insulator material. It has 4 contacts, operates b/w -40 to 105°C, and meets UL standards. Ideal for cable mounting applications, featuring female contact gender and crimp termination for reliable connections.
43025-0208
Molex
The Molex 43025-0208 is a rectangular power connector with 0.152" body length, 0.27" body width, and 0.551" body depth. It features insulation resistance of 1Gohm, dielectric voltage withstand of 1000VAC, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination on cables.
4-794627-0
TE Connectivity
TE Connectivity 4-794627-0 is a Power Connector with 0.118" contact pitch, rated for 250V and -40 to 105°C operating range. Ideal for board mounting with matte tin finish, it features POLYAMIDE insulation and UL94V-0 flammability rating.
43025-1200
The Molex 43025-1200 is a power connector with 0.742" x 0.326" x 0.551" dimensions, polyester insulator, and 12 contacts. It operates b/w -40°C to 105°C, UL94V-0 rated, and features crimp termination for cable mounting. Ideal for commercial applications requiring board connectors with female SQ pin-skt contact style.
1376385-1
TE Connectivity 1376385-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated at 10A. Featuring GLASS FILLED POLYAMIDE66 insulator material, it offers high insulation resistance of 500MΩ. Ideal for board mounting with SOLDERABLE RETENTION CLIPS, this connector operates b/w -30 to 105°C and has a durability of 25 cycles.
B06P-VL
J S T Mfg
B06P-VL by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 6 contacts, made of COPPER ALLOY and POLYAMIDE66 insulator. It has Tin finish, UL 94V-0 flammability rating, suitable for board mounting applications requiring male solder termination.
43020-1200
Molex 43020-1200 is a rectangular power connector with 12 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, suitable for commercial applications requiring male crimp connectors in cable and panel mounting setups.
178305-2
TE Connectivity's 178305-2 is a rectangular power connector with 10 contacts, rated at 15A. It features a body length of 1.151", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
1054301102
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1723104104
Molex 1723104104 Power Connector features Liquid Crystal Polymer insulator, -40 to 105°C operating temp range, and UL 94V-0 flammability rating. With male SQ pin-skt contacts, it is ideal for board mounting applications requiring a 4-contact connector.
TST24RB01T
Itt Cannon
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1716920106
Molex 1716920106 is a rectangular power connector with 6 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body size of 0.699" x 0.561" x 0.981", UL94V-0 rated, and operates b/w -40°C to 120°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts.
7461057
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 7461057 is a rectangular power connector with 6 contacts. It has a press fit termination and features tin copper contact finish. This connector is commonly used in board mounting applications.
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
1-179276-3
TE Connectivity 1-179276-3 is a rectangular power connector with insulator made of glass filled polyester. It has a rated current of 15A, operates b/w -55 to 105°C, and offers durability up to 500 cycles. Ideal for board mounting applications requiring reliable signal connections in commercial settings.
43650-0315
The Molex 43650-0315 power connector has a body length of 0.498", insulation resistance of 1000000000 ohm, and operates b/w -40 to 105 °C. It is used in board mounting applications, with a contact material of brass and UL flammability rating of 94V-0.
PL082X-301-10D8
Amphenol
Amphenol's PL082X-301-10D8 is a RECTANGULAR POWER CONNECTOR with 2 contacts, male gender, and round pin socket style. It operates b/w -40°C to 125°C, making it suitable for power applications requiring a durable cable-mounted receptacle connector.
1461G2
Anderson Power Products
1461G2 by Anderson Power Products is a rectangular power connector with 6 contacts, UL 94V-0 rated. It supports crimp and solder terminations, suitable for cable and panel mounting. Ideal for applications requiring hermaphroditic contact gender in power connections.
2064610200
RECTANGULAR POWER CONNECTOR;
2002411125
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
19-09-1029
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: POLARIZED;
19-09-1039
The Molex 19-09-1039 is a rectangular power connector with a mating contact pitch of 0.264". It has a dielectric voltage rating of 5000VAC and can operate in temperatures ranging from -40 to 105°C. Ideal for commercial applications, it features a polarized housing, crimp termination, and can accommodate wire sizes from 30 to 14 AWG.
19-09-2158
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Dielectric Withstanding Voltage (V): 5000VAC; Mounting Option-1: POLARIZED LCK;
19-09-2128
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
19-09-1026
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Termination Type: CRIMP;
19-09-1019
19-09-2028
Molex 19-09-2028 is a rectangular power connector with POLYAMIDE insulator. It has 0.59" x 0.52" x 1.19" dimensions, operating from -40 to 105°C. Suitable for commercial use, it features locking mounting option and crimp termination for cable/panel installation.
19-09-1069
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Insulator Color: NATURAL;
19-09-1049
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; Dielectric Withstanding Voltage (V): 5000VAC; MIL Conformity: NO;
19-09-1099
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
19-09-2038
The Molex 19-09-2038 is a rectangular power connector with a mating contact pitch of 0.264", dielectric voltage of 5000VAC, and operating temperature range from -40 to 105°C. It features a polarized housing, UL flammability rating of 94V-2, and is suitable for commercial applications requiring reliable power connections.
19-09-2026
Molex 19-09-2026 is a rectangular power connector with 0.59" x 0.52" x 1.19" dimensions, POLYAMIDE insulator, and UL 94V-0 flammability rating. It features a single plug with two contacts for cable or panel mounting using crimp termination. Ideal for commercial applications requiring reliable power connections in natural color insulator shells.
19-09-1066
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
19-09-2151
The Molex 19-09-2151 is a rectangular power connector with a polyamide66 insulator material. It has 15 contacts and is designed for panel mounting. This male plug connector has a UL flammability code of 94V-2.
19-09-1126
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
19-09-1129
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; Dielectric Withstanding Voltage (V): 5000VAC; Body or Shell Style: RECEPTACLE;
19-09-1159
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Body Length: 1.35 inch;
19-09-2029
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
19-09-2046
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; Dielectric Withstanding Voltage (V): 5000VAC; IEC Conformity: NO;
19-09-2096
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; Insulator Material: POLYAMIDE66;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved