Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43045-1600 is a rectangular power connector with 16 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings, it offers durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
Median Price
$2.150
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.110
100+ parts
-
1k+ parts
10k+ parts
Avnet
$1.395
Interstate Connecting
$1.647
$1.341
Distrelec
$1.790
$1.680
$1.640
Master Electronics
$2.794
$2.540
$2.250
$2.190
Element14
$3.100
$3.093
$3.056
$2.504
Mouser Electronics
$3.180
$2.550
$2.310
Arrow
$3.203
Chip1Stop
$3.440
$1.440
$1.280
$1.260
RS Americas
$4.270
$3.290
$2.900
DigiKey
$4.380
TTI
$1.820
$1.670
$1.460
Verical
$1.806
TTI Europe
$1.642
$1.524
$1.417
PEI Genesis
NEP Electronics
Farnell
$2.110
Powell Electronics
$1.590
$1.510
$1.470
Newark
$2.380
$2.370
Greenchips
$0.962
$0.754
Maritex
$1.157
$0.836
$0.693
Digiode
$1.442
TestEquity
Nova Conductors
$1.968
TME
$2.600
$2.230
$1.660
Component Electronics Inc.
$3.850
$2.880
$2.500
Sensible Micro Corp
Martec Srl
NAC Semi
$2.100
Inventory MP
VNN
IBS Electronics
$1.879
Vyrian
Component Sense
Diverse Electronics
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
Semtec, LLC
EMSNET
Semi Source
Atlantic Semiconductor
SIE Connect GmbH - GreenChips
Cyclops Electronics Ltd
Holdelec - ElecDif-Pro
EPE Components Inc.
Bristol Electronics
Inland Empire Components Inc.
Semicontronic
$0.402
$0.392
$0.390
Corphita
$1.366
Argo Parts USA
Netroflash
$1.929
Aztec Data Supply Inc.
$3.259
Andel Nordic
$3.427
Continental Prestige Electronics
$3.940
$2.490
$2.020
Eastek
GreenTree Electronics
Kepictronics
Authorized Procurement Solutions
S.R.D Solutions
Robosynatics
$3.580
$3.507
Lucentia Tech
Abacus Technologies
Assy Fe
EMSNET (Excess)
Computer Components Inc. - USA
Cyclops Electronics Ltd (Excess)
SIE Connect GmbH (Excess)
0.118 inch - Close contact pitch allows for a secure and reliable connection.
1.088 inch - Provides ample space for multiple contacts within the connector.
1000000000 ohm - High insulation resistance ensures minimal signal interference.
0.345 inch - Compact design for efficient use of space on the circuit board.
1500VAC - High voltage resistance for safe and reliable operation.
BRIGHT TIN OVER NICKEL - Ensures a durable and corrosion-resistant connection.
0.48 inch - Sufficient depth to accommodate contacts securely.
LIQUID CRYSTAL POLYMER (LCP) - Offers excellent thermal and mechanical properties.
2 - Allows for multiple connections within the same connector.
PEG - Easy mounting option for secure installation on a circuit board.
105 °C - Suitable for high-temperature environments.
2.9972 mm - Provides ample space between contacts for easy identification.
40 °C - Can withstand low-temperature conditions without impact on performance.
100u inch - Ensures long-lasting performance and protection against wear.
RECTANGULAR POWER CONNECTOR - Specifically designed for power-related applications.
BRASS - Offers excellent conductivity and durability.
94V-0 - Meets safety standards for flame resistance.
POLARIZED HOUSING - Ensures proper alignment during installation.
5 A - Can handle high current signals without overheating.
BLACK - Provides a sleek and professional appearance.
CSA, UL - Compliant with industry standards for quality and safety.
16 - Allows for multiple connections within the same connector.
ONE - Simplifies the connection process for ease of use.
30 Cycles - Can withstand repeated use without degradation in performance.
0.118 inch - Close contact spacing for a secure connection.
BOARD - Easy installation on a circuit board.
GLASS FILLED LIQUID CRYSTAL POLYMER - Provides strength and durability for the connector.
2.9972 mm - Ensures precise alignment of terminals for a reliable connection.
SOLDER - Provides a secure and permanent connection on the PCB.
3.0024 N - Ensures contacts remain securely connected.
MALE - Designed for specific gender requirements in power applications.
10 mohm - Allows for efficient power transfer with minimal resistance.
RECEPTACLE - Offers a secure housing for the contacts.
RIGHT ANGLE - Allows for multiple mounting orientations for flexibility.
SQ PIN-SKT - Ensures a stable and reliable connection between contacts.
11.5648 N - Provides a secure connection during installation.
LOCKING - Adds an extra layer of security to the mounting process.
0.125 inch - Standard terminal length for compatibility with various applications.
POLARIZED LCK - Ensures proper alignment during installation.
RECTANGULAR - Allows for easy identification and alignment of contacts.
COMMERCIAL - Designed for reliable and consistent performance in commercial applications.
Power Connectors 43045-1600 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
43045-1600 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 13/Apr/2015
PCN Assembly/Origin - Mult Devs Location 15/Dec/2021
PCN Packaging - Packaging Improvement 06/Sep/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
39-01-2045
Molex
Molex 39-01-2045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105°C, suitable for commercial applications requiring high insulation resistance and UL certification. Ideal for cable and panel mounting with crimp termination, offering reliable performance in various electrical setups.
1330
Anderson Power Products
1330 by Anderson Power Products is a rectangular power connector with UL 94V-0 flammability code. It has 1 contact and supports crimp and solder termination. This hermaphroditic connector is commonly used in cable applications.
1586037-4
TE Connectivity
TE Connectivity's 1586037-4 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated at 9A. It features a Mating Contact Pitch of 0.165", Insulation Resistance of 1G ohm, and operates in temperatures from -40 to 105°C. Ideal for power applications on PCBs due to its POLYAMIDE insulator material and SOLDER termination type.
212514-1004
RECTANGULAR POWER CONNECTOR;
43025-1208
The Molex 43025-1208 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It is used in cable applications, featuring female contacts and hybrid contact style for durability up to 30 cycles. This commercial-grade connector operates b/w -40°C to 105°C, meeting CSA, TUV, and UL standards.
1-480711-0
TE Connectivity 1-480711-0 is a Power Connector with dimensions 1.3" x 1.02" x 1.08". It has an Insulation Resistance of 100MΩ, operating from -55°C to 105°C. With a total of 15 contacts, it is used in commercial applications requiring durable male connectors for power transmission at up to 115/230VAC.
1-1445022-2
TE Connectivity 1-1445022-2 is a Power Connector with dimensions 1.457" x 0.207" x 0.553". Rated for 250V, it operates b/w -40 to 105°C. Ideal for power applications, featuring POLYAMIDE66 insulator and UL94V-0 flammability rating.
350214-1
TE Connectivity's 350214-1 is a RECTANGULAR POWER CONNECTOR with 16 contacts, rated at 12A. It has a body size of 1.68"x0.785"x0.375" and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring male solder terminals in power connectors.
1-480703-0
TE Connectivity 1-480703-0 is a power connector with dimensions of 1.066" x 0.527" x 1.07". It has an insulation resistance of 1000000000 ohm and a rated voltage of 600V, suitable for commercial applications requiring durable male connectors with crimp termination and panel mounting.
39-01-2146
The Molex 39-01-2146 is a rectangular power connector with 14 contacts, POLYAMIDE insulator, and 2200VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination connectors on panels.
43045-1200
The Molex 43045-1200 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and bright tin finish contacts.
39-03-6030
Molex 39-03-6030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 2100VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination on cables.
7461057
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 7461057 is a rectangular power connector with 6 contacts. It has a press fit termination and features tin copper contact finish. This connector is commonly used in board mounting applications.
5916G4
5916G4 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with operating temperatures ranging from -20 to 105°C. Featuring HERMAPHRODITIC contact gender, UL 94V-0 flammability code, and cable mounting type, it is ideal for power applications requiring a durable and reliable connector.
1345G6
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Style: BLADE PIN-SKT; Filter Feature: NO; Minimum Operating Temperature: -20 Cel; Termination Type: CRIMP;
43045-0806
The Molex 43045-0806 is a rectangular power connector with 8 contacts, LCP insulator, and tin finish. It operates b/w -40 to 105°C, suitable for commercial applications. With a male contact gender and right-angle mounting style, it offers high insulation resistance of 1Gohm.
1381
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Mounting Type: CABLE; Total No. of Contacts: 1; Empty Shell: YES;
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
1-2232017-3
TE Connectivity's 1-2232017-3 is a POLYAMIDE power connector with 16A rated current. It features LOCATING POST for board mounting, -40 to 120 °C operating temperature range, and UL 94V-0 flammability code. Ideal for applications requiring polarized connectors with solder termination on boards.
43020-1001
Molex 43020-1001 is a rectangular power connector with 10 contacts in a 2-row configuration. Featuring PBT-POLYESTER insulator, it has a body depth of 0.665". Ideal for commercial applications, this male crimp connector has UL94V-0 flammability rating and straight plug mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43045-0612
The Molex 43045-0612 is a rectangular power connector with 6 contacts, rated for 5A signal current. Featuring bright tin over nickel termination finish, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications, this durable connector with LCP insulator is UL94V-0 compliant.
43045-0400
The Molex 43045-0400 is a rectangular power connector with 4 contacts, featuring bright tin termination finish and glass-filled liquid crystal polymer insulator. It has a temperature range of -40 to 105°C, UL94V-0 flammability rating, and male contact gender. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43045-0600
The Molex 43045-0600 is a rectangular power connector with 6 contacts, featuring bright tin over nickel termination finish. It has a body length of 0.518", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
43045-0412
The Molex 43045-0412 is a rectangular power connector with 4 contacts, featuring tin termination finish and brass contact material. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C. Ideal for board mounting applications, this connector has a durability of 30 cycles and meets CSA, TUV, UL standards.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
43045-1012
The Molex 43045-1012 is a rectangular power connector with 10 contacts, rated for 5A signal current. It features LCP insulator material, brass contact material, and tin finish. Ideal for board mounting applications in commercial settings with operating temperatures from -40 to 105°C.
43045-0418
Molex 43045-0418 is a rectangular power connector with 4 contacts, LCP insulator, and brass contact material. It has a dielectric voltage of 1000VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability up to 30 cycles.
43045-0212
The Molex 43045-0212 is a rectangular power connector with 2 rows, rated at 5A signal current. Featuring liquid crystal polymer insulator and bright tin over nickel finish, it offers high durability with 30 cycles. Ideal for board mounting applications in commercial settings, this connector has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C.
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
43045-1000
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-0414
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
43045-1212
Molex 43045-1212 is a rectangular power connector with 12 contacts, rated at 5A signal current. It features liquid crystal polymer insulation, bright tin over nickel finish, and brass contact material. Suitable for board mounting with a mating contact pitch of 0.118", it has an operating temperature range from -40 to 105°C.
43045-0818
The Molex 43045-0818 is a rectangular power connector with 8 contacts, made of LCP material. It has an insulation resistance of 1Gohm and can withstand up to 1000VAC. Ideal for board mounting applications in commercial settings, it features male contact gender with tin finish and nickel barrier.
43045-0401
43045-0618
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43045-2412
The Molex 43045-2412 is a rectangular power connector with 24 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It has a body length of 1.561", suitable for board mounting applications with a dielectric voltage rating of 1500VAC. This durable connector, made from LCP material, operates b/w -40°C to +105°C and is ideal for commercial use cases requiring reliable power connections.
43045-0619
The Molex 43045-0619 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring male contact gender and surface mount termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved