Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$0.383
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.230
100+ parts
-
1k+ parts
$0.194
10k+ parts
$0.182
Distrelec
$0.349
$0.283
$0.261
Farnell
$0.364
$0.214
$0.180
Mouser Electronics
$0.390
$0.279
$0.237
$0.217
Newark
$0.400
$0.282
$0.243
DigiKey
$0.420
$0.277
RS Americas
$0.432
$0.328
$0.263
Adafruit Industries
$4.831
$4.589
NEP Electronics
Chip1Stop
$0.211
$0.187
Arrow
Element14
$0.311
$0.307
TTI
$0.178
Verical
$0.388
RS (Exports)
$0.287
PSC Electronics
Digiode
TestEquity
$0.210
Nova Conductors
TME
$0.330
$0.270
IBS Electronics
$0.231
$0.220
Vyrian
NAC Semi
$0.398
Schukat
$0.215
VNN
Corphita
$0.168
Argo Parts USA
Netroflash
$0.207
$0.202
Semicontronic
$0.309
$0.301
$0.300
Continental Prestige Electronics
$0.410
$0.222
$0.185
Andel Nordic
$3.091
$2.968
Aztec Data Supply Inc.
$4.582
Advanced Electronics
Perfect Parts
EMSNET (Excess)
Assy Fe
Authorized Procurement Solutions
GreenTree Electronics
Eastek
Robosynatics
Lucentia Tech
Power Connectors 39-01-3045 attributes and parameters. Explore more Power Connectors devices from Molex
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
39-01-3045 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
New Jersey Semiconductor Products
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
39-29-5203
Molex
Molex 39-29-5203 is a rectangular power connector with 20 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
39-01-4043
The Molex 39-01-4043 is a rectangular power connector with 4 contacts, made of POLYAMIDE66 material. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for commercial applications, it offers crimp termination and durability up to 30 cycles.
43045-0801
Molex 43045-0801 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and matte tin finish for signal currents up to 5A.
828907-1
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Filter Feature: NO; Total No. of Contacts: 55;
03-09-1081
Molex 03-09-1081 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 1500VAC and can handle up to 12A signal current. With POLYAMIDE66 insulator material, it operates b/w -40°C to 105°C temperature range.
IPBT-102-H1-T-S-RA-K
Samtec
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
39-01-2141
Molex 39-01-2141 is a rectangular power connector with 14 contacts, POLYAMIDE insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination with wire sizes ranging from 28 to 16 AWG.
1-480703-0
TE Connectivity 1-480703-0 is a power connector with dimensions of 1.066" x 0.527" x 1.07". It has an insulation resistance of 1000000000 ohm and a rated voltage of 600V, suitable for commercial applications requiring durable male connectors with crimp termination and panel mounting.
3-794630-6
TE Connectivity 3-794630-6 is a Power Connector with 0.118" Mating Contact Pitch, rated for 250V and 5A current. Featuring Matte Tin finish, it has POLYAMIDE insulator and UL94V-0 flammability rating. Ideal for board mounting applications in commercial settings due to its reliability and polarization key feature.
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
1-480704-0
TE Connectivity 1-480704-0 is a Power Connector with dimensions of 1.08" x 0.55" x 1.08". It has POLYAMIDE insulator, operates b/w -55 to 105°C, and features 6 contacts for cable mounting applications.
2008750005
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
39-31-0107
Molex 39-31-0107 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL regulations.
39-30-1022
Molex 39-30-1022 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring matte tin finish and polyamide66 insulator material, it offers high insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range of -40 to +105 °C.
15-06-0080
Molex 15-06-0080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40°C to 105°C, suitable for commercial applications requiring high insulation resistance of 1Gohm. With solder termination and panel mounting, it offers reliable power connections in various electronic devices.
15-06-0065
Molex 15-06-0065 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for cable and panel mounting applications. With UL94V-2 flammability rating and durability of 30 cycles, it offers reliable performance in commercial settings.
5916G4
Anderson Power Products
5916G4 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with operating temperatures ranging from -20 to 105°C. Featuring HERMAPHRODITIC contact gender, UL 94V-0 flammability code, and cable mounting type, it is ideal for power applications requiring a durable and reliable connector.
43650-0301
Molex 43650-0301 is a rectangular power connector with 3 contacts, 0.118" pitch, and 0.172" body width. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring reliable commercial-grade power connections.
2002411125
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
50-84-1120
The Molex 50-84-1120 is a rectangular power connector with a mating contact pitch of 0.25 inches. It has a body length of 1.05 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications requiring reliable power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-01-2065
Molex 39-01-2065 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a 0.543" body length, 0.46" width, and 0.77" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
39-01-2025
The Molex 39-01-2025 is a rectangular power connector with insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. It is used in commercial applications, featuring a body length of 0.213", operating temperature range from -40 to 105 °C, and termination type as crimp.
39-01-2020
The Molex 39-01-2020 is a rectangular power connector with 0.213" body length, 0.42" width, and 0.77" depth. Featuring POLYAMIDE66 insulator material, it has an insulation resistance of 1Gohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 105°C and offers reliable performance in cable termination setups.
39-01-2045
Molex 39-01-2045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105°C, suitable for commercial applications requiring high insulation resistance and UL certification. Ideal for cable and panel mounting with crimp termination, offering reliable performance in various electrical setups.
39-01-2060
Molex 39-01-2060 Power Connector features 6 contacts, with 0.543" body length and 0.46" width. Insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operating temp range from -40 to +105°C. Ideal for commercial applications requiring reliable power connections in various industries.
39-01-2085
The Molex 39-01-2085 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-4030
Molex 39-01-4030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It has a 0.54" body length, 0.29" width, and 0.81" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2080
The Molex 39-01-2080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105 °C and has a contact resistance of 10 mohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-2041
Molex 39-01-2041 is a rectangular power connector with 4 contacts, made of brass. It has a mating contact pitch of 0.165", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications requiring durability up to 30 cycles.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
39-01-3028
Molex 39-01-3028 is a rectangular power connector with POLYAMIDE66 insulator. It has 2 contacts, female gender, and crimp termination. With UL94V-0 flammability rating, it's ideal for commercial applications requiring reliable cable mounting with straight style and locking option.
39-01-2161
Molex 39-01-2161 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in panel mounting setups. With UL certification and polarization key, it offers reliable connectivity for power systems.
39-01-2061
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; DIN Conformance: NO;
39-01-4031
Molex 39-01-4031 is a rectangular power connector with 3 contacts, made of POLYAMIDE insulator material. It has a dielectric voltage rating of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability compliance.
39-01-3023
Molex 39-01-3023 is a rectangular power connector with 2 rows, insulation resistance of 1Gohm, and operating temp range from -40 to 105°C. Ideal for cable and panel mounting applications due to its durability of 30 cycles, crimp termination type, and male contact gender.
39-01-2100
Molex 39-01-2100 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used in commercial applications for crimp termination on cables and panels, offering high insulation resistance of 1Gohm and operating temperature range from -40 to 105°C.
39-01-2125
Molex 39-01-2125 is a rectangular power connector with 12 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable power connections in cable and panel setups.
39-01-2120
Molex 39-01-2120 is a rectangular power connector with 12 contacts, TIN finish, and polyamide66 insulator. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable female crimp connectors in cable and panel mounting setups.
39-01-2105
The Molex 39-01-2105 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, has a dielectric strength of 1500VAC, and features crimp termination for female contacts. Ideal for commercial applications requiring reliable power connections in tight spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved