Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-29-1067 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durability and reliability in commercial settings.
Median Price
$0.950
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Arrow
1+ parts
$0.948
100+ parts
$0.791
1k+ parts
$0.688
10k+ parts
$0.622
Element14
$1.047
-
Mouser Electronics
$1.370
$1.030
$0.809
$0.765
DigiKey
$1.510
$1.060
$0.837
$0.726
Misumi USA
$1.830
Farnell
$0.951
PEI Genesis
TTI Europe
$0.911
NEP Electronics
TTI
Verical
Powell Electronics
$0.830
$0.730
Avnet
$0.685
Master Electronics
$0.826
$0.734
Chip1Stop
$0.389
$0.334
Nova Conductors
$0.802
Digiode
$0.808
TestEquity
$0.910
Component Electronics Inc.
$1.540
$1.150
$1.000
Sensible Micro Corp
IBS Electronics
$0.832
NAC Semi
$1.290
Vyrian
Cyclops Electronics Ltd
Rutronik
$0.690
Extreme Components
VNN
TME
$1.350
$1.300
EMSNET
Prism Electronics
Semicontronic
$0.331
$0.323
$0.321
Corphita
Argo Parts USA
Netroflash
$0.762
$0.746
Continental Prestige Electronics
$0.917
$0.735
$0.658
Andel Nordic
$3.399
$3.263
Aztec Data Supply Inc.
$9.645
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Assy Fe
Cyclops Electronics Ltd (Excess)
EMSNET (Excess)
Eastek
The longer body length allows for a more secure and stable connection.
High insulation resistance ensures minimal leakage of current, resulting in better safety and performance.
The compact body width saves space and allows for more connectors to be used in a small area.
The high dielectric voltage withstand capability ensures safe operation even in high voltage environments.
The finish provides excellent conductivity and corrosion resistance for a reliable connection.
The depth of the body ensures sufficient space for components to be securely housed within the connector.
Polyamide insulator material offers good mechanical strength and thermal resistance for reliable performance.
The high maximum operating temperature allows for use in a wide range of environments without the risk of overheating.
The low minimum operating temperature ensures that the connector can perform reliably even in extremely cold conditions.
The rectangular design offers easy identification and alignment during installation, making it user-friendly.
Brass contact material provides excellent conductivity and durability for a long-lasting connection.
The UL 94V-0 flammability rating indicates high fire resistance for improved safety.
The natural color of the insulator is aesthetically pleasing and allows for easy identification in a crowded setup.
Compliance with the UL standard ensures that the product meets strict safety and performance requirements.
Having multiple contacts allows for a higher power transmission capability and the ability to connect multiple devices.
Having a single connector simplifies installation and maintenance processes.
The specific contact arrangement ensures proper alignment and connection of the contacts for optimal performance.
With a durability of 30 cycles, this connector can withstand frequent plugging and unplugging without degradation in performance.
Board mounting type allows for easy and secure installation on a circuit board.
Solder termination provides a strong and reliable connection for long-term use.
The low minimum withdrawal force allows for easy removal of the connector when needed.
Male contact gender is ideal for creating connections with female connectors for reliable power transfer.
Low contact resistance ensures efficient power transmission and minimal energy loss during operation.
Receptacle style allows for easy insertion and removal of the connector for convenience.
Right-angle mounting style offers flexibility in installation and saves space in compact setups.
Square pin socket contact style provides a secure and stable connection for reliable power transfer.
High maximum insertion force ensures a secure connection and prevents accidental disconnection.
The terminal length provides sufficient area for soldering and ensures a strong connection to the circuit board.
Locking mounting option provides added security and stability to the connector during operation.
Commercial-grade reliability ensures consistent performance in various applications and environments.
Power Connectors 39-29-1067 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-29-1067 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Semtech Electronics
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43160-3104
Molex
Molex 43160-3104 is a rectangular power connector with 4 contacts, featuring tin over copper finish. It has a mating contact pitch of 0.295", insulation resistance of 1G ohm, and operates b/w -40°C to 75°C. Ideal for board mounting applications in commercial settings due to its reliability and UL94V-0 flammability rating.
2-1903130-3
TE Connectivity
TE Connectivity 2-1903130-3 is a rectangular power connector with 6 contacts, UL 94V-0 flammability rating, and glass-filled polyethylene insulator. It operates b/w -55 to 105°C, suitable for cable mounting applications at 115/230VAC. The male crimp terminal connector has a row spacing of 0.129" and is compliant with UL standards.
1-179555-6
TE Connectivity 1-179555-6 is a rectangular power connector with 12 contacts, GLASS FILLED POLYETHYLENE/POLYESTER insulation, and UL94V-0 flammability rating. It operates b/w -55 to 105°C, suitable for commercial applications requiring high insulation resistance of 100MΩ. Ideal for power connections in panels with crimp termination and male contact gender.
1-770166-0
TE Connectivity's 1-770166-0 Power Connector features a rated voltage of 600V, insulation resistance of 100M ohm, and a signal current rating of 9.5A. With board mounting options and durable construction, it is ideal for commercial applications requiring reliable power connections.
10-08-1091
Molex 10-08-1091 is a rectangular power connector with 9 contacts, featuring a mating contact pitch of 0.2" and insulation resistance of 1G ohm. Ideal for board mounting applications, it has a temperature range from -40 to 80°C and uses solder termination for reliable connections.
44441-2004
The Molex 44441-2004 is a rectangular power connector with a mating contact pitch of 0.295 inches. It has a body length of 1.213 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications requiring a rated current of 18A and features a polarized housing for easy installation.
120943-2
TE Connectivity's 120943-2 is a rectangular power connector with matte tin finish, rated at 250V and 16A. With glass-filled polyester insulator, it operates b/w -55 to 125°C. Ideal for board mounting applications requiring reliable female contacts in a right-angle receptacle design.
43020-0201
Molex 43020-0201 is a rectangular power connector with PBT-POLYESTER insulator, UL 94V-0 flammability rating, and 2 rows of contacts. It has a temperature range from -40 to 105°C and is suitable for commercial applications requiring a male crimp contact termination on cables.
DF22L-2P-7.92DSA(05)
Hirose Electric
DF22L-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, Tin/Copper finish, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -35 to 85°C and UL94V-0 flammability rating. Ideal for board mounting applications requiring male blade pin-skt connectors.
1-480707-2
TE Connectivity's 1-480707-2 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL94V-2 flammability rating, and 9 contacts. It operates b/w -55 to 105°C, suitable for power applications requiring CRIMP termination in PANEL mounting setups at 115/230VAC.
1-2345729-1
TE Connectivity 1-2345729-1 is a RECTANGULAR POWER CONNECTOR with 600V rated voltage, GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -30 to 140 °C and is UL certified for power applications requiring male crimp contacts.
1720650008
Molex 1720650008 is a rectangular power connector with liquid crystal polymer insulator, 8 contacts, and 2200VAC dielectric voltage. It is used in commercial applications for board mounting with split board lock option and solder termination. Operating temperature ranges from -40 to 105°C.
50-84-2040
The Molex 50-84-2040 is a rectangular power connector with 4 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connections in temperatures ranging from -55 to 105°C.
1723163310
Molex 1723163310 power connector features liquid crystal polymer insulator, UL 94V-0 flammability rating, and male SQ pin-skt contact style. With a temperature range of -40 to 105°C, it is ideal for board mounting applications requiring a reliable 10-contact connection.
770156-3
TE Connectivity 770156-3 is a POLYAMIDE power connector with dimensions 0.994" x 0.39" x 0.824". Rated for 13A, it has 4 contacts and operates b/w -55 to 105°C. Ideal for cable mounting applications, it features IDC termination and UL94V-2 flammability rating.
39-01-4041
Molex 39-01-4041 is a rectangular power connector with 4 contacts, suitable for commercial applications. It has a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting, it features crimp termination and a durable design lasting up to 30 cycles.
39-29-9085
Molex 39-29-9085 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.165" and insulation resistance of 1Gohm. It has a dielectric voltage rating of 1500VAC, suitable for board mounting applications in commercial settings due to its durability and reliability.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
10-18-1090
The Molex 10-18-1090 is a rectangular power connector with 9 contacts, UL94V-0 rated black polyester insulator. It has a terminal pitch of 5.0292mm, solder termination, and can withstand temperatures from -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
03-06-1062
Molex 03-06-1062 is a RECTANGULAR POWER CONNECTOR with 6 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, ideal for commercial applications requiring reliable power connections in panel-mounted setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-29-6188
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
39-29-9023
39-29-0123
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
39-29-6028
The Molex 39-29-6028 is a rectangular power connector with 2 contacts, TIN over nickel finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high durability and reliability under commercial standards.
39-29-9047
39-29-9046
39-29-9027
The Molex 39-29-9027 is a rectangular power connector with 2 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
39-29-6248
39-29-6088
Molex 39-29-6088 is a rectangular power connector with 8 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL.
39-29-6048
Molex 39-29-6048 is a rectangular power connector with 4 contacts, made of brass and polyamide66 insulator. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105 °C. Ideal for board mounting applications requiring durability, reliability, and high insulation resistance.
39-29-1028
39-29-9043
Molex 39-29-9043 is a rectangular power connector with 0.165" mating contact pitch, suitable for board mounting with 2 rows of contacts. It features TIN COPPER termination finish, POLYAMIDE66 insulator material, and BRASS contact material. Rated at 8A signal current, it has a durability of 30 cycles and operates b/w -40 to 105°C.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
39-29-9066
The Molex 39-29-9066 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 0.819 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in power applications requiring a durable and reliable connection.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
39-29-9029
39-29-1047
39-29-9067
The Molex 39-29-9067 is a rectangular power connector with 6 contacts, made of brass and tin copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
39-29-0063
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved